Zebra Motion C5te/F5te Ford F150 Installation Instructions (en)

Ford F150 Installation Instructions
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Ford F150 Installation Instructions
1) Remove the rubber mat from the top of the dashboard as shown below.
2) Remove the two retaining bolts securing the top of the dash panel as shown below.
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Ford F150 Installation Instructions
3) Using a plastic trim panel removal tool, carefully prise out the sync panel as shown.
4) Disconnect the cable plugs.
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Ford F150 Installation Instructions
5) Remove the bolt securing the bottom of the dash panel as shown.
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Ford F150 Installation Instructions
6) Carefully prise up the left and right hand trim panels as shown. There is no need to remove them but they do need to be loose enough to be able to remove the radio console in step 7.
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Ford F150 Installation Instructions
7) Pull out the radio console as shown and disconnect all of the wiring looms.
For more information, contact your local Motion Reseller or Motion Representative.
© 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc
.
www.MotionComputing.com
Loading...
+ 14 hidden pages