Page 1
MK3100 MICROKIOSK
FOR WINDOWS
EMBEDDED COMPACT 7
PRODUCT REFERENCE
GUIDE
Page 2
Page 3
MK3100 MICROKIOSK FOR
WINDOWS® EMBEDDED COMPACT 7
PRODUCT REFERENCE GUIDE
72E-163525-05
Revision A
April 2015
Page 4
ii MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
© 2015 Symbol Technologies, Inc.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying,
recording, or information storage and retrieval systems. The material in this ma nual is subject to change
without notice.
The software is provided strictly on an “as i s” basis. All sof twar e, including firmware, furnished to the user is on
a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software
or firmware program delivered hereunder (licensed program) . Except as n oted below, such license may not be
assigned, sublicensed, or otherwise tran sfe rr e d by th e user without prior written consent of Zebra. No right to
copy a licensed program in whole or in part is granted, exce pt as permitted unde r copyright law. The user shall
not modify , merge, or incorporate any for m or portion of a licensed program with other pro gram material, create
a derivative work from a licensed program , or us e a li censed program in a network without written permission
from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered
hereunder , and to include the same on any authorized copies it makes, in whole or in part. The user agrees not
to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any
portion thereof.
Zebra reserves the right to make changes to any software or product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra Technologies
Corporation, intellectual property rights. An implied license only exists for equipment, circuits, and subsystems
contained in Zebra products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered
trademark of Symbol Technologies, Inc., a Zebra Technologies company.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Page 5
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev A 2/2013 Initial release
-02 Rev A 5/2013 Remove references to System Configuration Manager (SCM) and Device
-03 Rev A 2/2014 Update Function Buttons section
-04 Rev A 3/2015 Zebra rebranding
-05 Rev A 4/2015 Removed Local Configuration Using the Microsoft Windows Control Panel section
iii
Configuration Package (DCP), change references of USB 1.1 ports to USB 2.0,
removed Downloading Partitions to the MK3100
Page 6
iv MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 7
TABLE OF CONTENTS
About This Guide
Introduction..................................................................................................................................... ix
Configurations................................................................................................................................. ix
Chapter Descriptions ...................................................................................................................... ix
Notational Conventions................................................................................................................... x
Related Publications....................................................................................................................... xi
Service Information......................................................................................................................... xi
Chapter 1: MK3100 Introduction
Overview ........................................................................................................................................ 1-1
Parts of the MK3100 ...................................................................................................................... 1-2
MK3100 Features .......................................................................................................................... 1-3
Touch Screen / LCD ................................................................................................................ 1-3
Speakers .................................................................................................................................. 1-3
Microphone .............................................................................................................................. 1-3
Bar Code Imager ...................................................................................................................... 1-3
Motion Sensor .......................................................................................................................... 1-4
Function Buttons ...................................................................................................................... 1-4
Reset Button ............................................................................................................................ 1-5
External Ports .......................................................................................................................... 1-5
Memory .................................................................................................................................... 1-5
Software ................................................................................................................................... 1-5
Magnetic Stripe Reader (Optional) .......................................................................................... 1-6
Mounting Options ..................................................................................................................... 1-6
Developer Kits .......................................................................................................................... 1-6
Bar Code Decoding ........................................................................................................................ 1-7
Imaging with the MK3100 ........................................................................................................ 1-7
Chapter 2: Installation
Overview ........................................................................................................................................ 2-1
Unpacking the MK3100 .................................................................................................................. 2-1
Removing the Screen Protector ..................................................................................................... 2-2
Page 8
vi MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Inserting a MicroSD Card .............................................................................................................. 2-2
Connecting the MK3100 ................................................................................................................ 2-2
Power Connection .................................................................................................................... 2-3
Wired Ethernet Connection to a Host ...................................................................................... 2-3
Wireless Ethernet Connection to a Host .................................................................................. 2-4
USB Connection to a PC and Peripherals ............................................................................... 2-5
MK3100 Mounting .......................................................................................................................... 2-6
Using a VESA Mount ............................................................................................................... 2-6
Using the MK3100 Wall Mount Kit ........................................................................................... 2-7
Using the MK3100 Pole Mount Kit ........................................................................................... 2-10
Magstripe Reader Installation ........................................................................................................ 2-11
Card Swiping ............................................................................................................................ 2-12
Chapter 3: Configuration
Overview ........................................................................................................................................ 3-1
Configuration via Registry File ....................................................................................................... 3-1
Rebooting the MK3100 ............................................................................................................ 3-1
Chapter 4: System Features
Overview ........................................................................................................................................ 4-1
RegMerge and CopyFiles ...................................................................................................... ........ 4-2
Accessing the Windows CE Desktop ............................................................................................. 4-2
Network Time Update: SNTP Client .............................................................................................. 4-2
Memory Management .................................................................................................................... 4-2
Flash: Nonvolatile (Persistent) Memory ................................................................................... 4-2
RAM: Volatile (Non-Persistent) Memory .................................................................................. 4-2
RhoElements ................................................................................................................................. 4-3
Loading Additional Fonts on the MK3100 ...................................................................................... 4-3
Using Additional Fonts in Native Applications .......................................................................... 4-4
Using Additional Fonts in Managed Applications ..................................................................... 4-4
Using Additional Fonts in Browser Applications ....................................................................... 4-4
Things to Consider when Using Additional Fonts .................................................................... 4-4
Input Panel and Keyboard ............................................................................................................. 4-4
Microsoft Applications .................................................................................................................... 4-4
Chapter 5: Application Deployment
Software Installation on Development PC ..................................................................................... 5-1
Enterprise Mobility Developer Kit (EMDK) for C ...................................................................... 5-1
Enterprise Mobility Developer Kit (EMDK) for .NET ................................................................. 5-2
RhoElements ........................................................................................................................... 5-2
Platform SDK ........................................................................................................................... 5-2
Installing Enterprise Mobility Developer Kits ............................................................................ 5-3
Installing Other Development Software ................................................................................... 5-3
Deployment .................................................................................................................................... 5-3
ActiveSync ............................................................................................................................... 5-3
OS Update ............................................................................................................................... 5-6
Bootloader ................................................................................................................................ 5-7
Rapid Deployment Client ......................................................................................................... 5-14
Page 9
Table of Contents vii
Creating a Splash Screen ........................................................................................................ 5-14
Flash Storage ................................................................................................................................. 5-15
FFS Partitions .......................................................................................................................... 5-15
Working with FFS Partitions ..................................................................................................... 5-15
Non-FFS Partitions 17
Appendix A: Technical Specifications
Technical Specifications ................................................................................................................ A-1
Appendix B: Wireless Configuration
Overview ........................................................................................................................................ B-1
Appendix C: Maintenance and Troubleshooting
Overview ........................................................................................................................................ C-1
Maintenance .................................................................................................................................. C-1
Troubleshooting ............................................................................................................................. C-2
MK3100 Version Information ......................................................................................................... C-5
Index
Page 10
viii MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 11
ABOUT THIS GUIDE
Introduction
The MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide provides information on
installing, operating, and programming the MK3100.
NOTE Unless otherwise noted, the term MK3100 refers to all configurations of the device.
Configurations
This guide includes the following configurations:
•
MK3100-030BG4EZZWW - Imager, Ethernet
•
MK3190-030BG4EBTWW - Imager, 802.11 a/b/g/n, Bluetooth
Chapter Descriptions
Following are brief descriptions of each chapter in this guide.
•
Chapter 1, MK3100 Introduction provides an overview of the MK3100 that includes parts of the device,
features, and scanning modes.
•
Chapter 2, Installation describes the hardw are se tu p an d installation of the MK3100.
•
Chapter 3, Configuration describes the configuration parameters of the MK3100.
•
Chapter 4, System Features describes the wide range of capabilities used to support independent
application development on the MK3100.
•
Chapter 5, Application Deployment describes the software development environments and how to install and
upgrade applications and images.
•
Appendix A, Technical Specifications provides technical information about the MK3100.
Page 12
x MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
•
Appendix B, Wireless Configuration refers to the Wireless Fusion Enterprise Mobility Suite User Guide
for Version X2.00 for information on configuring the wireless connection.
•
Appendix C, Maintenance and Troubleshooting provides maintenance and troubleshooting information,
and describes how to identify the MK3100 version.
Notational Conventions
This document uses these conventions:
•
“User” refers to anyone using an application on the terminal.
•
“Device” refers to the MK3100.
•
Italics are used to highlight specific items in the general text, and to identify chap ters and sectio ns in this
and related documents. It also identifies names of windows, menus, menu items, and fields within
windows.
•
Bold identifies buttons to be tapped or clicked.
•
Bullets (•) indicate:
• lists of alternatives or action items.
• lists of required steps that are not necessarily sequential.
•
Numbered lists indicate a set of sequential steps, i.e., those that describe step-by-step procedur es.
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may
occur.
WARNING! This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.
Page 13
Related Publications
Following is a list of documents that provide additional information about configuring the MK3100:
•
MK3100 Quick Reference Guide, p/n 72-167095-xx
•
MK3100 Platform Software Development Kit (PSDK)
•
Enterprise Mobility Developer Kit (EMDK) for C
•
Enterprise Mobility Developer Kit (EMDK) for .NET
•
RhoElements
•
Wireless Fusion Enterprise Mobility Suite User Guide for Version X2.00, p/n 72E-164268-xx
•
Control Panel User Guide, p/n 72E-114860-xx
•
MSP 3.X User’s Guide, p/n 72E-100158-xx
For the latest version of these guides and software, and all Zebra guides, go to: http://www.zebra.com/support.
About This Guide xi
Service Information
If you have a problem using the equipment, contact your facility's technical or systems support. If there is a
problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support.
When contacting Zebra support, please have the following information available:
•
Serial number of the unit
•
Model number or product name
•
Software type and version number
Zebra responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.
If your problem cannot be solved by Zebra support, you may need to return your equipment for servicing and
will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void the warranty.
If you purchased your business product from a Zebra business partner, please contact that business partner
for support.
Page 14
xii MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 15
CHAPTER 1 MK3100 INTRODUCTION
Overview
The MK3100 MicroKiosk provides retail consumers access to data critica l to making an informed purchasing
decision. The MK3100 verifies prices on bar coded merchandise and obtains up-to-the-minute information on
in-store promotions. Its easy-to-read display can be used as an electronic billboard for instant in-store
merchandising and multimedia presentations to promote seasonal sales and upcoming events. The touch
screen and programmable function buttons enhance in-store applications an d allow customer interaction.
Page 16
1 - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Touch Screen / LCD
Speakers
Imager Window
Microphone
Function Buttons
Motion Sensor
Parts of the MK3100
Figure 1-1 and Figure 1-2 illustrate MK3100 parts. See MK3100 Features on page 1-3 for explanations of
these parts as well as other MK3100 features.
Figure 1-1
MK3100 Front View
Page 17
MK3100 Introduction 1 - 3
Cable Run
Power
Mini-USB Host/Client Port
RJ45 (Ethernet)
MicroSD Card Slot
Headset Jack
Cable Run
Mounting Hole (4)
Cable Run
Mini-USB Host Ports (2)
Reset Button
Figure 1-2
MK3100 Features
The MK3100 supports the following features.
Touch Screen / LCD
The full-color 8-inch diagonal WVGA (800 X 480 pixels) LCD is ideal for presenting text, graphics, and video.
The touch screen accommodates greater user interaction and enhances custom designed applications.
Speakers
The MK3100 speakers are ideal for multimedia applications.
Microphone
The MK3100 includes a microphone built into its front housing.
Bar Code Imager
The MK3100 decodes 1D bar codes as well as 2D symbologies such as PDF417. See Bar Code Decoding on
page 1-7. The imager window protects the engine.
MK3100 Rear View
Page 18
1 - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Motion Sensor
The motion sensor detects motion in front of the MK3100 to trigger imaging.
Function Buttons
The MK3100 has four programmable function buttons (see Figure 1-1) that correspond to Up Arrow, Down
Arrow, Enter, and Escape from left to right, by default. You can remap these buttons to other functions using
the following registry keys:
Button 1
; P1 - TRIG01 - UP
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\ProgrammableKeys\P1]
;;; simulate VK_UP
"Action"=dword:00000002
"KeyCode"=dword:0026 ; UP
Button 2
; P2 - TRIG02 - DOWN
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\ProgrammableKeys\P2]
;;; simulate VK_DOWN
"Action"=dword:00000002
"KeyCode"=dword:0028 ; DOWN
Button 3
; P3 - TRIG03 - ENTER
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\ProgrammableKeys\P3]
;;; simulate VK_ENTER
"Action"=dword:00000002
"KeyCode"=dword:000D ; ENTER
Button 4
; P4 - TRIG04 - ESCAPE
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\ProgrammableKeys\P4]
;;; simulate VK_ESCAPE
"Action"=dword:00000002
"KeyCode"=dword:001B ; ESCAPE
Page 19
MK3100 Introduction 1 - 5
Reset Button
To reset the device, use a paper clip to press the reset button until you feel a slight click, and hold for 10
seconds.
External Ports
The MK3100 has the following external ports:
Power Port
A power supply connects to the power port (2.0 mm barrel jack connector) on the MK3100. For more
information, see Power Connection on page 2-3.
Mini-USB Ports
The MK3100 includes a Mini-USB 2.0 host/client po rt and two Mini-USB 2.0 host ports for peripheral
connections. For more information, see USB Connection to a PC and Peripherals on page 2-5.
RJ45 Ethernet / 10/100Base-T
Wired/Wireless Ethernet: Power through AC Outlet
The Ethernet / 10/100Base-T (10-conductor RJ45) port accommodates Ethernet data connection. The
MK3100 receives power through the Zebra approved po wer supply.
Wired Ethernet: Power through Power-over-Ethernet
The MK3100 supports Power-over-Ethernet (POE). An Ethernet (10/100Base-T) cable connected to the
Ethernet port provides both data communication and power to the MK3100.
MicroSD Card Slot
The MK3100 contains a slot for microSD cards of up to 32 GB.
Headset Jack
The MK3100 includes a port for headset connection.
CAUTION When connecting a headset, Zebra recommends using cable ties or other securing mechanisms
outside the unit to provide strain relief.
Memory
The MK3100 standard system configuration cont ains 1 GB RAM / 8 GB flash. The flash me mory is non-volatile
and stores the system firmware, user applications, and data.
Software
Standard well-supported operating system and development tools ease application development for the
Microsoft
Studio.NET, Internet Explorer 7.0, C# , V isual Basi c.NE T, Windows med ia and vid eo player s, and RhoElem ent s.
®
Windows® Embedded Compact 7 operating system: Embedded Visual C/C++ 4.0, Visual
Page 20
1 - 6 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Magnetic Stripe Reader (Optional)
An optional three-track Magnetic Stripe Reader (MSR) module attaches to the MK3100 and adds the ability to
read and process loyalty card and credit card transactions. The MSR connects via USB to the MK3100.
Mounting Options
Y ou can mo unt the MK3100 on a desktop or wall using a commercially available bra cket or stand that co nforms
to the 100 mm VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI™) mounting standards. See
MK3100 Mounting on page 2-6.
Developer Kits
The following developer kits are available for the MK3100:
•
EMDK for C (see Enterprise Mobility Developer Kit (EMDK) for C on page 5-1) for developing native
C/C++ applications
•
RhoElements (see RhoElements on page 5-2) for web development
•
EMDK for .NET (see Enterprise Mobility Developer Kit (EMDK) for .NET on page 5-2) for developing
managed .NET applications in C# or VB.NET.
Page 21
Bar Code Decoding
Symbol
Aiming Pattern
1D bar code
2D bar code
The MK3100 decodes any traditional retail 1D or 2D bar code presented in its field of view.
Imaging with the MK3100
When imaging, the MK3100 projects a red aiming dot whic h allows positioning the bar code within its field of
view. Ensure the bar code is within the decode range and and that the aiming dot is centered on the bar code .
The MK3100 beeps to indicate a successful decode.
MK3100 Introduction 1 - 7
Figure 1-3
Imaging with the MK3100
Positioning the Symbol
To decode a symbol, center the aiming dot on the symbol, in any orientation.
Figure 1-4
Imaging Orientation with Aiming Dot
Page 22
1 - 8 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
0123 45
0123 45
0123 45
0123 45
The MK3100 can also decode with the aiming dot on a symbol but not centered. The top examples in
Figure 1-5 show acceptable aiming options, while the bottom examples may not decode.
Figure 1-5
Acceptable and Incorrect Aiming
The aiming dot is smaller when the symbol is closer to the MK3100 and larger when it is farther away. Scan
symbols with smaller bars or elements (mil size) closer to the MK3100, and those with lar ger bars or eleme nts
(mil size) farther from the MK3100.
Page 23
CHAPTER 2 INSTALLATION
Overview
This chapter describes MK3100 installation and setup, inclu d ing :
•
Unpacking the MK3100
•
Removing the Screen Protector on page 2-2
•
Inserting a MicroSD Card on page 2-2
•
Connecting the MK3100 on page 2-2
• Power Connection on page 2-3
• Wired Ethernet Connection to a Host on page 2-3
• Wireless Ethernet Connection to a Host on page 2-4
• USB Connection to a PC and Peripherals on page 2-5
•
MK3100 Mounting on page 2-6
•
Magstripe Reader Installation on page 2-11
Unpacking the MK3100
Remove the MK3100 from its packing and inspec t it for da mage. Keep the p acking, it is th e appr oved shipping
container and should be used if the MK3100 needs to be returned for servicing.
Page 24
2 - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Removing the Screen Protector
A screen protector is applied to the MK3100. Zebra recommends using this to minimize wear and tear. Screen
protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift
it off the display.
CAUTION Do not use a sharp object to remove the protector. Doing so can damage the display.
For a package of five replacement screen protectors, contact Zebra.
Inserting a MicroSD Card
To use a microSD card, insert it into the slot in the back of the MK3100 as shown on the device. See Figure 1-2
on page 1-3 for slot location. To remove the card, press down gently on it to eject, then remove it from the slot.
Connecting the MK3100
The MK3100 supports both wired and wireless solutions. Connecting the MK3100 includes the following:
•
Power Connection on page 2-3 (not required for POE configurations)
•
Wired Ethernet Connection to a Host on page 2-3
• Power through AC Outlet
• Power through POE
•
Wireless Ethernet Connection to a Host on page 2-4
•
USB Connection to a PC and Peripherals on page 2-5
• Connecting to a PC - ActiveSync connection to a desktop computer for programming via the
mini-USB 2.0 host/client port
• Connecting to Peripheral Devices - via the mini-USB 2.0 host ports
To access the Windows
®
CE Desktop, see Accessing the Windows CE Desktop on page 4-2.
Page 25
Installation 2 - 3
Power Connection
The universal AC power supply connects to the power port on the MK3100 using a 5.5 x 2.5 mm OD barrel
connector. The center pin on the connector is positive, and the outer barrel is negative. It is compatible with:
•
120V 60 Hz (North America)
•
230V 50 Hz (International excluding Japan)
•
100V 50/60 Hz (Japan).
To connect the power supply:
1. Insert the power supply barrel connector into the MK3100 power port. See Figure 1-2 on page 1-3.
2. Route the power cable.
3. Plug the Zebra AC power supply into a wall outlet.
Wired Ethernet Connection to a Host
Power through AC Outlet
The MK3100 communicates to the host through a 10/100Base-T Ethernet cable and receives power through
an AC power supply.
1. See Power Connection to provide power.
2. Connect the Ethernet cable to the RJ45 port on the MK3100. See Figure 1-2 on page 1-3.
3. Plug the other end of the Ethernet cable into the host system LAN port.
Power through POE
The POE 802.3at/af installation option allows the MK3100 to communicate and receive power on the same
10/100Base-T Ethernet cable.
1. Connect the Ethernet cable to the RJ45 port on the MK3100. See Figure 1-2 on page 1-3.
2. Plug the other end of the Ethernet cable into an 802.3at/af certified host system LAN port or 802.3at/af port
injector.
NOTE 802.3af host systems can provide power to the MK3100 via POE if certain peripherals are shut off. If POE
is not providing enough power, connect a power supply. See Power Connection.
Page 26
2 - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Pin 8 Pin 1
RJ45/Ethernet Connector Pinouts
Figure 2-1 identifies the locations for the Ethernet port pins, and Table 2-1 lists pin descriptions.
Figure 2-1
Table 2-1
1TXD (+)
2TXD (-)
3RXD (+)
4POE VCC
5POE VCC
6RXD (-)
7 POE GND
8 POE GND
8-Pin RJ45 Connector Port
RJ45/Ethernet Pin Descriptions
Pin Description
Wireless Ethernet Connection to a Host
For wireless configuration, refer to the Wireless Fusion Enterprise Mobility Suite User Guide for V ersion X2.00.
Page 27
Installation 2 - 5
USB Connection to a PC and Peripherals
Connecting to a PC
To program the MK3100, connect it to a desktop PC:
1. See Power Connection on page 2-3 to provide power.
2. Connect a mini-B USB cable to the mini-USB host/client port on the MK3100. See Figure 1-2 on page 1-3
for port locations.
3. Connect the other end of the cable to a USB port on the host.
Connecting to Peripheral Devices
To connect a peripheral device such as a printer, a handheld scanner, a keyboard, or mouse:
1. Connect a mini-A USB cable to one of the mini-USB ports on the MK3100. See Figure 1-2 on page 1-3 for
port locations.
2. If necessary, connect a USB adapter cable (available from Zebra) to the mini-A USB cable.
3. Connect the other end of the cable to the peripheral device.
Page 28
2 - 6 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
203.74
225
100
100
100
100
55
120
25
10
50
10
25
10
217.91
0.5
2.5
52.4
45.04
23.31
20.04
20.04
23.31
10
7.6
7.6
31.517 17
31.5
100
54.126
26
37
37
54
22.46
(10)
Note: Dimensions are in mm.
MK3100 Mounting
To mount the MK3100 on a wall or counter top, use a mounting bracket that conforms to the 100 mm VESA
specification. Also, Zebra offers an optional wall mount kit and pole mount kit for mounting the MK3100.
Using a VESA Mount
To mount the MK3100 using a 100 mm VESA mounting bracket:
1. The device’s mounting inserts are M4 x 8.1 mm. When selecting an appropriate screw type, ensure its
length does not penetrate the device’s back housing more than 8.1 mm after going through the mounting
plate.
2. Align the VESA mounting holes with the mounting holes on the back of the device.
3. Insert the screws through each of the four aligned mounting holes.
Figure 2-2 provides MK3100 dimensions for mounting reference.
Figure 2-2
MK3100 Mounting Dimensions
Page 29
Installation 2 - 7
Mounting
Screws (4)
Mounting Plate
Power Adapter
Power Supply
Mounting Plate
Power Adapter
Power Supply
Power Connector
Using the MK3100 Wall Mount Kit
Securing the Mounting Plate
Determine the mounting location and the orientation of the power adapter behind the mounting plate.
Configuration 1: Power Port Facing Down
1. Secure the mounting plate to the wall using the four mounting screws provided.
2. Slide the power adapter down into the plate with the power port facing down.
3. Plug the power supply into the power adapter.
Figure 2-3
Securing the Mounting Plate - Configuration 1
Configuration 2: Power Port Facing Up
1. Plug the power supply into the power adapter.
2. Position the power adapter behind the mounting plate with the power port facing up and the power
connector routing between the two bottom tabs.
Figure 2-4
Securing the Mounting Plate - Configuration 2
Page 30
2 - 8 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Mounting Screws (4)
Power Connector
Shoulder Screws (4)
Power Adapter
Power Port
3. Secure the mounting plate to the wall using the four mounting screws provided.
Figure 2-5
Inserting Mounting Screws
Mounting the MK3100 on the Mounting Plate
1. Insert the four shoulder screws provided into the mounting holes in the back of the MK3100.
Figure 2-6
2. Connect the power adapter to the power port in the back of the MK3100.
3. Connect other required cables and route and secure them properly.
Inserting Shoulder Screws
Page 31
Installation 2 - 9
Locking Screw
4. Mount the MK3100 by placing the shoulder screws through the four keyholes on the mounting plate, and
slide the MK3100 over and down to secure.
Figure 2-7
5. Insert the locking screw through the hole in th e tab at the side of the mounting plate. Hand tighten the
Mounting MK3100 on Mounting Plate
screw to secure the MK3100.
Page 32
2 - 10 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Shoulder Screws (4)
Mounting Plate
Mounting Screws (4)
Pole Mount Bracket
Pole Mount Straps
Locking Screw
Using the MK3100 Pole Mount Kit
To mount the MK3100 to a pole using the Pole Mount Kit:
1. Insert the four shoulder screws provided into the mounting holes in the back of the MK3100.
2. Connect the cables to the MK3100 and route and secure th em properly. Position the power adapter behind
the mounting plate. See Securing the Mounting Plate.
3. Secure the mounting plate to the pole mount bracket using the four mounting screws provided.
4. Mount the MK3100 by placing the shoulder screws through the four keyholes on the mounting plate, and
slide the MK3100 over and down to secure.
Figure 2-8
5. Route the pole mount straps through the mounting bracket. Wrap them around the pole and tighten.
6. Insert the locking screw through the hole in the tab at the side of the mounting plate. Hand tighten the
Figure 2-9
Securing Pole Mount Bracket
screw to secure the MK3100.
Inserting Locking Screw
Page 33
Magstripe Reader Installation
To install the optional MSR:
1. Secure the mounting plate to either side of the MK3100 using the four screws provided.
Installation 2 - 11
Figure 2-10
2. Secure the MSR to the plate using the two screws provided.
Securing the MSR Mounting Plate
Figure 2-11
Securing the MSR to the Mounting Plate
Page 34
2 - 12 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
3. Connect the USB cable to one of the two mini-USB host ports.
Figure 2-12
Connecting the USB Cable
Card Swiping
Swipe a card through the MSR in either direction, with the magnetic stripe facing in toward the MK3100.
Figure 2-13
Card Swiping
Page 35
CHAPTER 3 CONFIGURATION
Overview
This chapter describes how to set up and configure MK3100 applications, communications, and network
settings which include parameters such as the device name, internet browser settings, date and time, and
several other key settings.
Configuration via Registry File
Before downloading the configuration file (.reg file) to the MK31 00 Application folder, rename it mkconfig.reg.
Use one of the following methods to download the file to the MK3100:
•
Copy the mkconfig.reg file to the MK3100 Application folder using a USB ActiveSync connection (see
Downloading Files to the MK3100 on page 5-5).
•
Send the file to the MK3100 Application folder using FTP (see the instructions provided with the FTP
software).
•
Copy the mkconfig.reg file to a microSD card, then transfer the file into the MK3100 Application folder.
Rebooting the MK3100
After downloading the mkconfig.reg file, cold boot the MK3100 to apply the new settings.
Cold Boot
To reset the device, use a paper clip to press the reset button until you feel a slight click, and hold for 10
seconds.
Alternatively, remove and apply power to reset the device.
Warm Boot
Run the warm boot application. Select Start > Programs > Warmboot. Alternatively, use the Application
Program Interface (API).
Page 36
3 - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 37
CHAPTER 4 SYSTEM FEATURES
Overview
This chapter discusses the following operating system features:
•
RegMerge and CopyFiles on page 4-2
•
Accessing the Windows CE Desktop on page 4-2
•
Network Time Update: SNTP Client on page 4-2
•
Memory Management on page 4-2
•
Loading Additional Fonts on the MK3100 on page 4-3
•
Input Panel and Keyboard on page 4-4
•
Microsoft Applications on page 4-4
Page 38
4 - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
RegMerge and CopyFiles
RegMerge and CopyFiles are two device drivers included in the Windows CE OS to assist developers in
configuring the MK3100 following a cold boot. See Flash Storage on page 5-15 for more information.
Accessing the Windows CE Desktop
If an MK3100 is configured to launch an application on power-up, you can bypass the application at boot-up to
access to the Windows
®
CE desktop.
Network Time Update: SNTP Client
The MK3100 Simple Network Time Protocol (SNTP) client can automatically set and update the MK3100 time
and date through the network. Use this feature to set the system time an d date af ter reboot s or power out ages.
This feature also ensures consistent time an d da te stamping across a fleet of MK3100s. The SNTP Client
program queries the specified SNTP server over the network to set the time and date.
The SNTP client shipped with MK3100 Microsoft Windows Embedded Compact 7 is the Microsoft default
SNTP Client program.
Memory Management
Flash: Nonvolatile (Persistent) Memory
The MK3100 has 8 GB of available flash memory. The data partition (folder) has no available memory. The
data stored in flash memory persists through cold boot cycles.
Add a microSD card to the MK3100 to increase the non-volatile memory available for file storage.
RAM: Volatile (Non-Persistent) Memory
The MK3100 has 1 GB of RAM volatile memory. Developers can automate control of the device’s RAM
(volatile) memory allocation (storage vs. memory used to run programs) to persist memory allocation settings
through cold boot cycles.
Page 39
RhoElements
System Features 4 - 3
RhoElements is a powerful HTML5 development framework that supports all of today's popular mobile
operating systems, including Windows
work when connected to a wireless network and offline, so mobile workers always have the information they
need. RhoElements features include:
•
HTML5 application development environment that supports any operating system and hardware.
•
Complete control of user interface (UI) design for simple creation of intuitive business applications.
•
A set of Application Programming Interfaces (APIs) that enable easy incorporation of any mobile device
function into your application.
•
Deployment of both hybrid and native HTML5 applications on any mobile device.
®
CE and Windows® Embedded Handheld. RhoElements applications
Loading Additional Fonts on the MK3100
You can program the MK3100 to support additional fonts such as Unicode and double-byte character font.
The MK3100 supports the following system fonts as shipped from the factory. The font files corresponding to
these formats are located in the
•
Courier New
•
Symbol
•
Tahoma
\windows folder with .ttf extension.
•
Times New Roman
•
Wingding.
The default system font path for these fonts is \windows.
Use one of the following options to load fonts not supplied with the MK3100:
•
Change the system font path where the system looks for fonts. For example, to change default system
font path from
in
\application\fonts:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontPath]
"FontPath"="\application\fonts"
Adding this registry changes the entire system fonts directory, so fonts supplied with the OS are no
longer available. To use both the provided system fonts and new fonts, copy the system default fonts to
the new font directory.
•
Copy new/alternate fonts to the default \windows directory.
•
Copy alternate fonts to the \windows\fonts directory.
Copying new fonts to the \windows or \windows\fonts pr eserves existing fonts. However the new fonts
consume system RAM as they are part of the ObjectStore.
Using the third option, i.e., copying fonts to the \windows\fonts directory, makes it easier to manage the system.
Note that fonts copied to \windows or \windows\fonts do not persist over power cycles or cold boots. Use the
copy file feature to persist them over power cycles or cold boots.
\windows to \application\fonts add the following registry to the system along with new fonts
Page 40
4 - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Using Additional Fonts in Native Applications
Any application written in EVC can use the additional fonts using either MFC or Win32 APIs. If a spe cified font
is missing, the system uses an available font for display.
Using Additional Fonts in Managed Applications
All fonts installed in the system are available to the .Net Compact Framework during runtime.
Using Additional Fonts in Browser Applications
Regardless of how you installed the font in the system, to reference it using a browse r page, speci fy the font as
a STYLE, or use FONT tags. Use intuitive names for the fonts (use FontViewer on a Windows desktop and
locate the
Internet Explorer uses its default font to display the text.
Typeface Name line), and use quotes to enclose names with spaces. If the specified font is missing,
Things to Consider when Using Additional Fonts
•
Different font styles (e.g., bold and italic) often require separate TTF files; be sure to provide all required
styles. Do not reference styles by name (e.g., Arial Bold); set the style separately from the font (e.g.,
using a “b” or “strong” tag, or a style).
•
For best results, do not direct the system font path to a storage card (PCMCIA), as this can negatively
impact system performance. If this method is necessary, test the use of a storage card thoroughly for
fonts to ensure proper operation.
•
Most Web pages contain information that tells the browser what language encoding (the language and
character set) to use. If the page does not include that information, and the Language Encoding
Auto-Select feature is on, Internet Explorer can usually determine the appropriate language encoding. If
not, manually select it using
NOTE If the Auto-Select feature or a specific language pack is not installed, Internet Explorer prompts you to
download the files. Adding languages does not guarantee Web pages display in the preferred language.
Input Panel and Keyboard
Use the input panel or full keyboard on the touchscr een o f the MK310 0 to enter info rmation. To access, t a p the
icon in the icon tray, then select
keys. To close the
NOTE Use Ctrl-C to copy text, and Ctrl-V to paste text.
Input Panel or Keyboard, double-tap the icon.
Microsoft Applications
View menu > Encoding > More, then select the appropriate language.
Input Panel or Keyboard. To enter information, use a stylus to select the
The MK3100 includes Microsoft WordPad, Internet Explorer, and audio and video players.
Page 41
CHAPTER 5 APPLICATION DEPLOYMENT
Software Installation on Development PC
To develop applications to run on the MK3100, use one or all of the following:
•
Enterprise Mobility Developer Kit (EMDK) for C for developing native C/C++ applications
•
Enterprise Mobility Developer Kit (EMDK) for .NET for developing managed .NET applications
•
RhoElements for support for web development.
Enterprise Mobility Developer Kit (EMDK) for C
The Enterprise Mobility Developer Kit for C is based on industry-standard Microsoft® Windows® CE
development tools and enables development of native C and C++ applications. Use this developer kit in
conjunction with Microsoft
(PSDK).
The EMDK for C includes the following components:
®
Visual Studio 2008 or later, and MK3100 Platform Software Development Kit
•
Standard Symbol C API Libraries
•
MK3100-specific C API Libraries
•
Help file containing a C API reference guide
•
Sample applications with full source code.
Page 42
5 - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Sample Applications
The sample applications are included as a learning tool, to show developers how to inter face with the Symbol
C API functions. Some of the sample applications contained in the kit include:
•
Hello: A simple Hello World application.
•
DisplayTest: Displays various colors on the LCD screen.
•
KeyCheck: A keyboard checking utility that displays the keys pressed on the device and their associated
WM_MESSAGE.
•
ScanSamp2: Demonstrates the bar code scan engine (and external scanner).
•
MSRSamp2: Displays the MSR track data when a card is swiped.
•
MemTest: Displays the amount of available memory. Allocate and free blocks of memory to see how
available memory changes.
•
Win32PrintSamp: Prints a sample page to a connected printer.
NOTE The MK3100 supports the Signature Capture API via the EMDK for C only. Refer to the Enterprise Mobility
Developer Kit version 1.4 or later, under MK Series C APIs - Signature Capture.
Enterprise Mobility Developer Kit (EMDK) for .NET
The Enterprise Mobility Developer Kit for .NET allows Microsoft® .NET Compact Framework developers to
create managed (C# and VisualBasic.NET) applications that harness value-add features on the MK3100.
The EMDK for .NET includes the following components:
•
Class libraries
•
Sample applications
•
Documentation describing how to use the methods for each class library
RhoElements
RhoElements is a powerful HTML5 development framework that supports all of today's popular mobile
operating systems, including Windows
work when connected to a wireless network and offline, so mobile workers always have the information they
need. RhoElements features include:
•
HTML5 application development environment that supports any operating system and hardware.
•
Complete control of user interface (UI) design for simple creation of intuitive business applications.
•
A set of Application Programming Interfaces (APIs) that enable easy incorporation of any mobile device
function into your application.
®
CE and Windows® Embedded Handheld. RhoElements applications
•
Deployment of both hybrid and native HTML5 applications on any device.
Platform SDK
To download and install the Platform SDK:
1. Download the appropriate Platform SDK from the Zebra Support web site: http://www.zebra.com/support.
a. On http://www.zebra.com/support. select Software Downloads.
b. Select MicroKiosks and then select MK3100.
Page 43
c. Select the Platform SDK.
d. Save the .exe file to the development computer.
2. Run the file and follow the screen prompts to install.
Installing Enterprise Mobility Developer Kits
To install an EMDK:
1. Download the EMDK from http://www.zebra.com/support.
a. On http://www.zebra.com/support, select Developer Downloads and sign in.
b. Select MicroKiosks and then select MK3100.
c. Select the latest version of the Enterprise Mobility Developer Kit.
d. Download the .exe file to the development computer.
2. Double-click the executable file and follow the install screen prompts.
Installing Other Development Software
Application Deployment 5 - 3
Developing applications for the MK3100 requires installing other development software such as application
development environments on the development PC. Follow the installation instructions provided with this
software.
Deployment
With the appropriate accessory, software, and connection, the MK3100 can share information with the host
device. This chapter provides information about installing software and files on the MK3100.
Download and install software using one of the following methods:
•
ActiveSync (see page 5-3)
•
OS Update (via microSD card) (see page 5-6)
•
Bootloader (see page 5-7)
•
FTP server using Rapid Deployment (see page 5-14).
ActiveSync
The MK3100 communicates with a host computer via USB connection using Microsoft® ActiveSync (version
4.5.1 or higher), enabling data transfer data between a host computer and the MK3100. Microsoft Activesync
allows copying and pasting (rather than synchronizing) files between the MK3100 and host computer.
Installing ActiveSync
To install ActiveSync on the host computer, download the latest version of the software from
http://www.microsoft.com. Refer to the installation instructions included with the ActiveSync software.
Page 44
5 - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Connecting the MK3100 to the Host Computer
To configure ActiveSync for Guest access (suitable for copying files between the host computer and the
MK3100):
1. Connect the USB cable to the mini-USB host/client port on the MK3100 (see Figure 1-2 on page 1-3).
Connect the other end of the cable to a USB port on the host computer.
2. If the New Partnership window does not appear, on the host computer, select Start > Programs > Microsoft
ActiveSync
.
Figure 5-1
3. Click No and then Next. The Microsoft ActiveSync Guest Connected window displays.
Figure 5-2
New Partnership Window
Microsoft ActiveSync Guest Connected Window
Page 45
Application Deployment 5 - 5
Downloading Files to the MK3100
To download files (such as the mkconfig.reg file) from the host computer to the MK3100, use Windows
Explorer to copy the files:
1. On the host computer, select Explore.
Figure 5-3
2. Double-click the folder to expand the contents of the folder.
Figure 5-4
ActiveSync Explorer
Viewing Folder Contents
3. Use Explorer to locate the host computer directory that cont ains the file to download. Click on that directory
in the left pane to display its contents in the right pane.
Page 46
5 - 6 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
4. Drag the desired file(s) from the host computer to the desired device folder.
•
Program Files folder: files stored in this folder are discarded after a cold boot.
•
Application folder: files stored in this folder are retained after a cold boot.
NOTE Cold booting the MK3100 erases all files in RAM. Be sure to save any critical files in the Application folder,
e.g., radio profile, time zone setting, license keys. See Downloading Files to the MK3100 on page 5-5.
OS Update
To upgrade the operating system using a microSD card:
1. Download the MK3100 OS update package from http://www.zebra.com/support to the desktop computer.
2. Insert a microSD card with at least 1 GB of storage into the MK3100. See the Inserting a MicroSD Card on
page 2-2.
3. Connect the MK3100 to power and to the desktop computer via a USB cable, and set up a partnership
between the two computers using ActiveSync. See ActiveSync on page 5-3.
4. In the ActiveSync window on the desktop computer, select Explore.
5. Navigate to the OSUpdate folder downloaded in Step 1, and copy this folder into the My Device\SD Card\
folder on the MK3100.
6. On the MK3100, tap Start > Programs > Windows Explorer.
7. Navigate to the \SD Card\OSUpdate folder.
8. Double-tap the MK3100c50BenColor_SD.LNK file.
9. After the update completes and the MK3100 reboots, remove the microSD card.
Page 47
Application Deployment 5 - 7
Bootloader
Use Bootloader to download hex files to the MK3100 from an SD card or from a host computer via USB.
Loading Files From an SD Card
To load the hex files on to the MK3100 using an SD card:
1. Copy the files to the root directory of an SD card.
2. Insert a microSD card with at least 1 GB of storage into the MK3100. See the Inserting a MicroSD Card on
page 2-2.
3. Hold the MK3100’s first and third buttons until the Bootloader screen appears.
Select required operation
Download from SD card
Download from USB
Exit
Figure 5-5
Bootloader Menu
CAUTION To ensure a successful download, do not remove power from the MK3100 while in Bootloader.
4. Use the up and down scroll buttons to select Download from SD card, then press Enter. The Bootloader
displays the hex files available on the SD card.
a:\
All Done
CleanAppl.hex
CleanPlat.hex
MK30c70BenOS992411.hex.gz
MK30c70BenSC9924XX.hex
MK30c70XenBL0105XX.hex
MK30c70XenEA023800.hex
MK30c70XenIS0114XX.hex
MK30c70XenMO0117XX.hex
MK30c70XenPT9924XX.hex
MK30c70XenSS000030.hex
MK3100_Config_BB.hex
Figure 5-6
Hex File List
Page 48
5 - 8 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
5. Use the up and down scroll buttons to select a hex file, then press Enter to download the hex file to the
device.
Splash screen
############# 100%
Download complete
in - 0.042 seconds
(1854142 bytes/second)
Hit Enter to Acknowledge -
Figure 5-7
6. On completion, press ENTER to return to the Bootloader menu to select the next file to download.
7. To exit Bootloader, select Exit from the Bootloader main screen and press ENTER.
Download Complete Screen
Loading Files via USB
Use Bootloader to download customized flash file system partitions and load hex files to the flash memory of
the MK3100.
To load the hex files on to the MK3100 using USB:
1. Download the WCE USBDownload application from the Zebra Support web site. Follow the installation
instructions with the application.
2. Connect the MK3100 to a host computer via USB. See USB Connection to a PC and Peripherals on page
2-5.
3. On the host computer, launch the WCE USBDownload application.
Figure 5-8
4. Hold the MK3100’s first and third buttons until the Bootloader screen appears.
USB Download Window
Page 49
Select required operation
Download from SD card
Download from USB
Exit
Application Deployment 5 - 9
Figure 5-9
5. Use the up and down scroll buttons to select Download from USB, then press ENTER. The Bootloader
Bootloader Screen
CAUTION To ensure a successful download, do not remove power from the MK3100 while in Bootloader.
displays the following:
Waiting for input. . .
Figure 5-10
6. On the WCE USBDownload application, locate the hex files to download.
Waiting for Input
Page 50
5 - 10 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Figure 5-11
Select Source File Window
7. Select the hex files and then click Open.
NOTE To select multiple files, press the Ctrl key while selecting files.
If selecting multiple files to download, USBDownload reads the header of the file and identifies the file
type. If the Partition table file is among the files selected, then USBDownload downloads that file first.
Similarly, USBDownload downloads the CPLD file last.
8. Click the SEND DATA button. The hex file is downloaded to the MK3100.
Splash screen
##########) 100%
Download complete
in - 0.042 seconds
(1854142 bytes/second)
Hit Enter to Acknowledge
Figure 5-12
Download Complete Screen
9. On completion, press ENTER to return to the Bootloader main screen to select the next file to download.
10. To exit Bootloader, select Exit from the Bootloader main screen and press ENTER.
Page 51
Calibrating the Screen
Use the Calibration screen to align the touch screen:
1. Remove and restore power to the MK3100 to reboot.
Application Deployment 5 - 11
Figure 5-13
2. Carefully press and briefly hold the stylus tip on the center of the Calibration screen target. Repeat the
Calibration Screen
NOTE To access the Calibration screen from the Windows CE Control Panel, tap Start > Settings > Control
Panel. Double-tap the Stylus icon, tap the Calibration tab, and tap the Recalibrate button. The
Calibration screen appears.
procedure as the target moves and stops at different locations on the screen.
3. The Confirm Calibration screen displays. Tap the screen to accept the settings, or wait 30 seconds and the
MK3100 returns to the Calibration screen.
Page 52
5 - 12 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Bootloader Error Detection
While receiving data, Bootloader performs many checks on the data to ensure that the data is received
correctly . If an er ror is detected, Bo otloader imme diately abort s the do wnload, and re ports the error o n an error
screen.
This error message screen displays until a key is pressed. Once the screen is acknowledged, Bootloader
returns to the main menu to wait for a new selection.
To find the probable cause of the error, use the error number and/or the error text displayed on the screen to
look up the error in Table 5-1.
Table 5-1
Unknown error -1 A general error occurred. Retry the download. If the failure persist s, it is
Cancelled by user -2 The user cancelled the download.
Can't open the source -7 An error occurred opening the source device (either USB or SDMMC).
Can't open the
destination
Can't read from the
source device
Can't write to the
destination device
Transmission
checksum error
Bootloader Errors
Error Text
Error
Number
most likely due to a hardware failure; the MK3100 requires servicing.
Check source device connectivity and retry.
-8 An error occurred opening the destination device (either NAND, RAM,
Power Micro, IST, Keyboard Controller or CPLD). Retry the download. If
the failure persists, it is most likely due to a hardware failure; the
MK3100 requires servicing.
-9 The source device (either USB or SDMMC) could not be read from.
Check source device connectivity and retry.
-10 The destination device (either NAND, RAM, Power Micro, IST,
Keyboard Controller or CPLD) could not be written to. Retry the
download. If the failure persists, it is most likely due to a hardware
failure; the MK3100 requires servicing.
-11 An error occurred during transmission from the source device (either
USB or SDMMC) and the checksum check failed. Check source device
connectivity and retry.
Probable Cause
Readback checksum
error
There is no more heap
space available
Invalid data in verify file -19 The file contains invalid data. Check that the file is suitable for
Insufficient memory for
buffering data
Insufficient data
available to complete
record
-12 A checksum, generated from reading back data that was written to the
destination device, was incorrect. An error during transmission or a
write error to the destination device could cause this.
-14 There is no more heap space available for the download procedure.
Restart Bootloader and retry the download. If the failure persists,
contact service with details of what is being downloaded.
downloading on this terminal.
-20 There is no more heap space available for the download procedure.
Restart Bootloader and retry the download. If the failure persists,
contact service with details of what is being downloaded.
-21 A HEX file download was attempted but the HEX file is invalid. Ensure
the file is in proper HEX file format.
Page 53
Application Deployment 5 - 13
Table 5-1
Invalid Symbol HEX file -23 A HEX file download was attempted but the HEX file is invalid. Ensure
Unrecognized or
unsupported HEX
record
Invalid data in HEX file -25 The HEX file being downloaded contains invalid data. Ensure the file is
Exceeded max size -26 The download file is too large to fit into the space allocate d for it. Either
Partition is not valid on
this device
Wrong destination
code
Bootloader Errors (Continued)
Error Text
Error
Number
-24 The HEX file being downloaded contains an invalid or unrecognized
-27 The downloaded file specifies a partition entry that does not exist on the
-28 A specific partition was chosen from the Bootloader main menu but the
Probable Cause
the file is in proper HEX file format.
HEX record. Ensure the file is in proper HEX file format.
in proper HEX file format with valid HEX data.
make the file smaller or increase the space allocated for it by altering
the partition table.
device. Only download files that are valid for this device, or change the
partition table so that the new file is valid on the device.
file selected for download was for another partition. Ensure that the
partition selected from the Bootloader main menu matches the file
selected for download.
Non-contiguous record
found
Timed Out - No data -31 Bootloader was waiting for data from the source device but timed out
Invalid file format -33 The file format is invalid. Only HEX files are supported by Bootloader.
Partition Table not Valid -34 The size of flash memory is dif ferent than that des cribed in the p ar tition
Invalid data in file -35 The .bin or .sig file being downloaded contains invalid data. Ensure the
File cannot be loaded
to this unit
File validation failed -40 The file has either been signed incorrectly, or contains data that
-30 A HEX file download was attempted but the HEX file is invalid. Ensure
the file is in proper HEX file format.
before receiving any. Check the source device connectivity and retry.
table. Retry the download with the correct partition table file.
file is in proper file format.
-38 The file contains valid data that indicates it cannot be loaded onto the
device.
indicates that it cannot be loaded onto the terminal.
Page 54
5 - 14 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Rapid Deployment Client
The Rapid Deployment (RD) Client facilitates software downloads to an MK3100 from a Mobility Services
Platform (MSP) Console’s FTP server. The MSP Console is a web-based interface to the wireless
infrastructure monitoring and management tools provided by the MSP Lite or MSP Enterprise server.
When software packages transfer to the FTP server, an MK3100 on the wireless network can download them
by scanning RD bar codes encoding the location of the software packages. Multiple MK3100s can scan a
single RD bar code.
NOTE For detailed information about the Rapid Deployment Client and creating RD bar codes, refer to the MSP
3.X User’s Guide.
Creating a Splash Screen
Source bitmap files that create the default splash screens for the MK3100 are available on the Zebra Support
web site at http://www.zebra.com/support. You can customize the screen by modifying these files using any
standard windows image editor.
To create a custom splash screen:
1. Use an image editor to open the Splashcolor.bmp file.
2. Modify the bitmap file and save.
3. Create a splash partition.
If you don’t use the default files to create the new splash screens, be sure to preserve the image format of
800 x 480, 8 bits per pixel. Note that 8 bits per pixel only applies to splash screen images. Once Windows CE
is running, the color density is 16 bits per pixel. See Bootloader on page 5-7 for information about loading the
splash screen.
Page 55
Flash Storage
In addition to the RAM-based storage standard on Windows CE devices, the MK3100 also includes a
non-volatile flash-based storage area which can store data (partitions) that a cold boot cannot corrupt. This
flash area is divided into two sections: flash file system (FFS) partitions and non-FFS partitions.
FFS Partitions
The MK3100 includes two FFS partitions. These partitions appear to the MK3100 as a hard driv e tha t th e OS
file system can write files to and read files from. Data is retained even if power is removed.
The two FFS partitions appear as the following two separate folders in the Windows CE file system:
•
Platform: The Platform FFS partition contains Zebra-supplied programs and Dynamic Link Li braries
(DLLs). This FFS is configured to include DLLs that control system operation. Since the MK3100 needs
these drivers for basic operation, only experienced users should modify the content of this partition.
•
Application: The Application FFS partition stores applicatio n pr og ra m s need ed to op er a te the MK3100.
Working with FFS Partitions
Application Deployment 5 - 15
Because the FFS partitions appear as folders under the Windows CE file system, you can read and write to
them like any other folder. For example, an application program can write data to a file located in the
Application folder just as it would to the Windows folder. However, the file in the Application folder is in
non-volatile storage and is not lost on a cold boot (e.g., when power is removed for a long period of time).
Y ou can use st andard tools such as ActiveSync to copy files to and from the FFS p artitions. They appear as the
Application and Platform to the ActiveSync explorer . This is useful when inst alling applications on the MK3100.
Applications stored in the Application folder are retained even after a cold boot.
There are two device drivers included in the Windows CE image to assist developers in configuring the
MK3100 following a cold boot: RegMerge and CopyFiles.
Page 56
5 - 16 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
RegMerge.dll
RegMerge.dll is a built-in driver that allows making registry edits to the Windows CE Registry. Regmerge.dll
runs very early in the boot process and looks for registry files (.reg files) in certain flash file system folders
during a cold boot. It then merges the registry changes into the system registry located in RAM.
Since the registry is re-created on every cold boot from the default ROM image, the RegMerge driver is
necessary to make registry modifications persistent over cold boots.
RegMerge looks in the root of two specific folders for .reg files in the following order:
\Platform
\Application
Regmerge continues to look for.reg files in these folders until it checks all folders. This allows folders later in
the list to override folders earlier in the list. This way, it is possible to override Registry changes made by the
Platforms partitions folders. Take care when using Regmerge to make Registry chan ges. Examples of .reg files
are available on http://www.zebra.com/support.
NOTE Regmerge only merges the .reg files on cold boots. A warm boot skips the merge process.
Typically, you would not modify the registry values for drivers loaded before RegMerge, although this may be
necessary during software development. Since these early loading drivers read these keys before RegMerge
can change them, you must cold boot the MK3100. The warm boot does not re-initialize th e registry and the
early loading driver reads the new registry values.
Do not use Regmerge to modify built-in driver registry values, or merg e th e same Reg i stry value to two files in
the same folder, as the results are not predictable.
CopyFiles
Windows CE expects certain files to be in the Windows folder, residing in volatile storage. Windows CE
maintains the System Registry in volatile storage. CopyFiles copies files from one folder to another on a cold
boot. Files can be copied from a non-volatil e p artitio n (Application or Pl at form) to the Win dows or othe r volatile
partition during a cold boot. During a cold boot CopyFiles looks for files with a .CPY extension in the root of the
Platform, then the Application FFS partitions. These files are text files containing the source and destination for
the desired files to copy, separated by “>”. The following example from the file application.cpy is available on
the Zebra Support web site at http://www.zebra.com/support.
Files are copied to the Windows folder from the flash file system using copy files (*.cpy) in the following order:
\Platform
\Application
Example:
\Application\ScanSamp2.exe>\Windows\ScanSamp2.exe
This line directs CopyFiles to copy the ScanSamp2.exe application from the \Application folder to the
\Windows folder.
Page 57
Application Deployment 5 - 17
Non-FFS Partitions
Non-FFS partitions include additional software and data pre-loaded on the MK3100 that you can upgrade.
Unlike FFS partitions, these partitions are not visible when the operating system is running. They also contain
system information. Non-FFS partitions include the following:
•
Windows CE: The complete Windows CE operating system is stored on flash devices. If necessary, you
can download the entire OS image to the MK3100 using Zebra provided files. The installation package
includes the current OS partition on the MK3100. Obtain any upgrades from Zebra. This partition is
mandatory for the MK3100.
•
Splash Screen: A 675 kb maximum bitmap appears as the MK3100 cold boots. To download a
customized screen to display, see Creating a Splash Screen on page 5-14.
NOTE 8 bits per pixel only applies to splash screen images. Once Windows CE is running, the color density is
16 bits per pixel.
•
Partition Table: Identifies where each partition is loaded in the MK3100.
Page 58
5 - 18 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 59
APPENDIX A TECHNICAL SPECIFICATIONS
Technical Specifications
Table A-1
Physical Characteristi cs
Dimensions 8.87 in. H x 8.87 in. W x 2.17 in. D
Weight 1.9 lbs./0.86 kg
Display Size: 8 in. diagonal WVGA LCD
Power DC power: 12 VDC
Expansion Capabilities MicroSD card slot (user accessible); USB host
Data Ports 1 Mini-USB 2.0 host/client; 2 Mini-USB 2.0 host; Ethernet RJ-45
Audio Two integrated stereo speakers; microphone
Scanner Imager for capture of 1D, 2D, and PDF417 codes
2D Imager Decode Capability:
MK3100 Technical Specifications
Item Description
22.5 cm H x 22.5 cm W x 5.5 cm D
Resolution: 800 x 480 pixels
Resistive Touch Screen: standard
1D Symbologies
UPC/EAN-128, UPCA, UPCE, UPC/EAN Supplementals (disabled in
demo browser application), GS1 DataBar, Chinese 2 of 5, Code 93,
Discrete 2 of 5, Interleaved 2 of 5 (including ITF14 and ITF 2 of 5),
Codabar, ISBT 128
2D Symbologies
: Code 39, Code 128, EAN-8, EAN-13,
: PDF417, QR, Aztec, DataMatrix, MaxiCode
Page 60
A - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Table A-1
Performance Characteristics
CPU TI OMAP 4430 processor @ 1 GHz
Operating System Windows Embedded Compact 7
Browser Internet Explorer 7.0; RhoElements
Memory 1 GB RAM / 8 GB flash
Additional Memory Up to 32 GB flash using accessible microSD slot
Communications WLAN:
Power-over-Ethernet 802.3at/af
User Environment
Operating Temperature 32F° to 104°F / 0° to 40°C
MK3100 Technical Specifications
Item Description
802.11a: up to 54 Mbps
802.11b: up to 11 Mbps
802.11g: up to 54 Mbps
802.11n
Ethernet: 10/100 Mb Ethernet
Storage Temperature -40°F to 158°F / -40°C to 70°C
Humidity 5% to 85% (non-condensing)
Software
Available Applications Rapid Deployment Client
Mobility Services Platform (MSP)
Application Development Tools RhoElements for web development
Enterprise Mobility Developer Kit (EMDK) for C for developing native
C/C++ applications
Enterprise Mobility Developer Kit (EMDK) for .NET for developing
managed .NET applications in C# or VB.NET
Peripherals and Accessories
Mounting Options Conforms to the VESA 100mm mounting standard for attachment of
third-party, off-the-shelf mounting solutions; four (4) M4 x 8.1 mm
inserts provided
Page 61
APPENDIX B WIRELESS CONFIGURATION
Overview
To configure the MK3100 11 Mbps wireless connection, refer to the Wireless Fusion Enterprise Mobility Suite
User Guide for Version X2.00, p/n 72E-164268-xx.
Page 62
B - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 63
APPENDIX C MAINTENANCE AND
TROUBLESHOOTING
Overview
This chapter provides maintenance and troubleshooting in formation, and describes how to identify the MK3100
version.
Maintenance
Clean the housing and touch screen / LCD with a damp cloth and, if necessary, a non-ammonia based
detergent. Do not allow any abrasive material to touch the screen.
CAUTION Excessive liquids can damage the protective screen and necessitate replacement.
Page 64
C - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Troubleshooting
When configuring the MK3100, save and reboot the MK3100 to apply the change s.
•
MK3100 does not turn on on page C-3
•
MK3100 appears to lock up upon bootup on page C-3
•
MK3100 does not respond to polls from the host computer on page C-3
•
MK3100 does not send data to host computer on page C- 3
•
MK3100 does not recognize configuration bar codes on page C-3
•
Reg file values are not copied into the Registry at boot time on page C-3
•
The screen does not respond to pen input on page C-3
•
Need to determine a device MAC address on page C-3
•
The wireless MK3100 does not retain its WEP Key encryption after a reboot on page C-4
•
The Mobile Companion icon does not appear in the task tray on page C-4
•
When downloading files to the MK3100 from a .zip file using ActiveSync, a message displays indicating
there is not enough free disk space to copy the application on page C-4
•
When downloading a large file over Ethernet, IE issues an insufficient memory message on page C-4
•
When upgrading using a microSD card, the MK3100 cannot find files on the card on page C-4
•
Flash file system is corrupt on page C-4
•
Copying large amount of files from PC card to the application folder fails with error "Access is denied" on
page C-4
Page 65
Maintenance and Troubleshooting C - 3
Table C-1
Troubleshooting
Problem Possible Causes Possible Solutions
MK3100 does not turn on No power to the
MK3100.
MK3100 appears to lock up upon
bootup
A utility with no user
interface was specified
as the first user
application, or user
application failed to run.
MK3100 does not respond to polls
from the host computer
No communication
between the host and
MK3100.
Connect the Zebra approved power supply
to an AC power source and to the MK3100
power connector. See
1-3
.
Figure 1-2 on page
Either specify no user application, or a
UI-based application as the first user
application. If no user application is
specified, Explorer.exe is used.
Note: this is a substitution of Explorer .exe as
the user application, not protected mode.
Check cables to the MK3100. Ensure the
MK3100 address is the address the host is
polling.
Check communication parameters.
Open a command window using
Start > Programs > Command
ipconfig
to list the status of all radio and
and type
Ethernet interfaces.
MK3100 does not send data to host
computer
MK3100 does not recognize
configuration bar codes
Reg file values are not copied into
the Registry at boot time
The screen does not respond to pen
input
Need to determine a device MAC
address
MK3100 is not
programmed to work
with the host.
MK3100 is not
connected to the host.
The scan driver does not
support parameter bar
code scanning.
More than one .reg file
and duplicate registry
entries are present.
The screen is not
properly calibrated, or is
off center.
Check setup communication parameters.
Check cables to host computer.
Configure the MK3100 using scanning
C API scanner object.
Review all .reg files in /Application and
/Platform and ensure they have no conflicts.
Re-calibrate the screen.
Start > Programs > CommandPrompt
Open
Type ipconfig /all
to display the MAC address next to
‘address’.
.
Page 66
C - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Table C-1
Troubleshooting (Continued)
Problem Possible Causes Possible Solutions
The wireless MK3100 does not
retain its WEP Key encryption after
a reboot
The Mobile Companion icon does
not appear in the task tray
When downloading files to the
MK3100 from a .zip file using
ActiveSync, a message displays
indicating there is not enough free
disk space to copy the application
When downloading a large file over
Ethernet, IE issues an insufficient
memory message
Encryption keys not
saved in
Spectrum24.reg.
The radio software is not
present in the \platform
folder.
Files cannot download
directly from a .zip file.
For some file types, IE
requires free RAM
equivalent to twice the
file's size.
Set encryption keys using Mobile
Companion, then select
Spectrum24
to save them to
Start > Tools > Save
Spectrum24.reg.
Check communication parameter settings.
Open a command window using
Programs > Command
and type
Start >
ipconfig
to
list the status of all radio and Ethernet
interfaces.
Verify presen ce of radio software or re-in stall
\Platform partition software.
Extract/unzip the files to the host computer,
then transfer the unzipped files to the
MK3100 using ActiveSync.
This is an IE limitation.
When upgrading using a microSD
card, the MK3100 cannot find files
on the card
Flash file system is corrupt Reset or power loss
Copying large amount of files from
PC card to the application folder
The microSD card is
absent, corrupt, or not
supported.
during write to file
system.
Archive bit of the folder
properties set.
Replace the microSD card. The MK3100
supports up to a 32 GB microSD card.
Format file system partition using
Settings > Control Panel > Storage Manage r
Start >
and re-install partition data.
Clear the archive bit of folder properties.
,
fails with error "Access is denied"
When using SaveConfig to save
settings and cycling power before
the Save Complete message
Corrupt mkconfig.reg file. Use ActiveSync to delete the existing
mkconfig.reg file or use Monitor to repartition
the Application partition.
appears, the device does not boot
properly.
Similarly, when using C API to save
configurations, the device does not
boot properly.
If problems still occur, see MK3100 Version Information on page C-5 for system information before calling for
service help.
Page 67
MK3100 Version Information
Maintenance and Troubleshooting C - 5
If an MK3100 is configured to launch an application on power-up, bypass this upon booting to access the
Windows
1. From the Windows
2. Select MK3100 identification from the Control Panel window to view the following information:
®
CE Desktop. See Accessing the Windows CE Desktop on page 4-2.
®
task bar, select Start > Settings > Control Panel.
• Device name
• Description
• OS version
• Monitor version
• Display type
• Memory sizes.
Page 68
C - 6 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 69
INDEX
A
AC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
accessing the Windows® CE desktop . . . . . . . . . . . 4-2
ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3, 5-6
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
downloading files . . . . . . . . . . . . . . . . . . . . . . . . 5-3
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
adding programs
using bootLoader . . . . . . . . . . . . . . . . . . . . . . . . 5-8
using bootloader . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
advertisement insert . . . . . . . . . . . . . . . . . . . . . . . . 2-11
aiming dot
orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7, 1-8
audio player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
B
bar codes
decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
bootLoader
error messages . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
bootloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7, 5-8
buttons
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
C
calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-11, C-3
chapter descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
cold boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
ethernet, wired . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
ethernet, wireless . . . . . . . . . . . . . . . . . . . . . . . . 2-4
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
companion programs
internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
configuration file
downloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
to host computer . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
wired ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
wireless ethernet . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
creating splash screen . . . . . . . . . . . . . . . . . . . . . . . 5-14
D
date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
decoding bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
developer kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi, 1-6
EMDK for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
EMDK for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
RhoElements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3
documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
download
configuration file . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
to host computer . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
E
EMDKs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1, 5-2
RhoElements . . . . . . . . . . . . . . . . . . . . . . . . 5-1, 5-2
Enterprise Mobility Developer Kits . . . . . . . . . . . . . . . 5-1
error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Page 70
Index - 2 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
ethernet setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
10/100Base-T port connection . . . . . . . . . . . . . . 1-5
wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
F
features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
flash file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
non-FFS partitions . . . . . . . . . . . . . . . . . . . . . . 5-17
splash screen . . . . . . . . . . . . . . . . . . . . . . . 5-17
partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
copyfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
regmerge . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
flash memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
flash storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
font loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
function buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
H
headset jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
host communications
ethernet, wired . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
ethernet, wireless . . . . . . . . . . . . . . . . . . . . . . . . 2-4
management . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
microSD card . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 4-2
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
slot location . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
microsoft applications
internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Mobility Services Platform Console . . . . . . . . . . . . .5-14
motion sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Motorola Solutions support . . . . . . . . . . . . . . . . . . . . . . xi
mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6, 2-6
pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
VESA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
MSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14
N
nonvolatile memory . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . .x
NTP, see SNTP
I
IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
window . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2, 1-3
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
bar code decoding . . . . . . . . . . . . . . . . . . . . . . . 1-7
installing
ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
advertisment insert . . . . . . . . . . . . . . . . . . . . . . 2-11
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
development tools . . . . . . . . . . . . . . . . . . . . . . . . 5-3
mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
VESA mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
L
LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2, 1-3
loading fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
M
maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
O
operating system upgrade . . . . . . . . . . . . . . . . . . . . .5-6
OS upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
P
partitions
FFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-15
non-FFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-17
splash screen . . . . . . . . . . . . . . . . . . . . . . .5-17
parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4, C-4
PCMCIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4, C-4
peripheral connection
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
POE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Ethernet / 10/100Base-T . . . . . . . . . . . . . . . . . . . 1-5
headset jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3
power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
RJ45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 2-5
power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
AC power supply . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Page 71
Index - 3
options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
POE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
power-over-ethernet . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
printer
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
program memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
programmable buttons . . . . . . . . . . . . . . . . . . . . . . . 1-4
programs
adding using bootLoader . . . . . . . . . . . . . . . . . . 5-8
adding using bootloader . . . . . . . . . . . . . . . . . . . 5-7
flash file system . . . . . . . . . . . . . . . . . . . . . . . . 5-15
R
RAM memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
rapid deployment client . . . . . . . . . . . . . . . . . . . . . . 5-14
RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
rebooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
recalibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 3-1
location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
RhoElements . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1, 5-2
S
scanner
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
screen calibration . . . . . . . . . . . . . . . . . . . . . . .5-11, C-3
screen protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
SD card, micro . . . . . . . . . . . . . . . . . . . . . . . . . .1-5, C-4
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
slot location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
service information . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
setup
advertisement insert . . . . . . . . . . . . . . . . . . . . . 2-11
inserting microSD card . . . . . . . . . . . . . . . . . . . . 2-2
mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
USB to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
VESA mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
wired ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
wired ethernet AC outlet . . . . . . . . . . . . . . . . . . . 2-3
wired ethernet, POE . . . . . . . . . . . . . . . . . . . . . . 2-3
wireless ethernet . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Simple Network Time Protocol, see SNTP
SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
software developer kits
EMDK for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
EMDK for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
RhoElements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
software installation
BootLoader . . . . . . . . . . . . . . . . . . . . . . . . . 5-7, 5-8
speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3
splash screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
storage memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
T
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3
troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . C-2, C-3
U
unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
updating data
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
upgrade
OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
USB
cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
peripheral connection . . . . . . . . . . . . . . . . . . . . . 2-5
port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
V
video player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
volatile memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
W
wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Page 72
Index - 4 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Page 73
Tell Us What You Think...
Very familiar Slightly familiar Not at all familiar
We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form
to: (631) 627-7184, or mail to:
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Attention: Technical Publications Manager
Data Capture Solutions
IMPORTANT: If you need product support, please call the appropriate customer support number provided. Unfortunately,
we cannot provide customer support at the fax number above.
Manual Title:___________________________________________
(please include revision level)
How familiar were you with this product before using this manual?
Did this manual meet your needs? If not, please explain.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
What topics need to be added to the index, if applicable?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
What topics do you feel need to be better discussed? Please be specific.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
What can we do to further improve our manuals?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
Thank you for your input—We value your comments.
Page 74
Page 75
Page 76
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a
registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc.
72E-163525-05 Revision A - April 2015
Loading...