CAUTION:
12.7 mm
0.5”
12.7 mm
0.5”
Universal Wall Mount Bracket
Installation Guide
Use mounting hardware (screws and/or
anchors) appropriate for the type of wall you
are mounting the bracket onto. The Wall Mount
Bracket mounting slots dimensions are 5 mm
(0.2 in.). Fasteners must be able to hold a
minimum of 25 Kg (50 lbs.)
For proper installation consult a professional
installer. Failure to install the Wall Mount
Bracket properly can possibly result in damage
to the hardware.
Use the template on the back side of this
guide.
1
2
Zebra reserves the right to make changes to any product to improve
reliability, function, or design. Zebra does not assume any product
liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein. No license is
granted, either expressly or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to any combination, system, apparatus
which Zebra products might be used. An implied license exists only
for equipment, circuits, and subsystems contained in Zebra
products.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH
Corp. The Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc.
, machine, material, method, or process in
Place the template onto the wall, level and
mark the four screw hole locations and drill
holes.
1. Install top two screws into the wall.
2. The screw heads should protrude 12.7
mm (0.5”) from the wall.
3. Align the mounting bracket’s top two
mounting holes with the screws. Place
mounting bracket on screws.
Tighten the two screws to the wall
securing the bracket.
4. Install and secure two screws at the
3
4
72-125552-02 Revision A — February 2015
bottom of the bracket.
Mounting Multiple Brackets
When mounting multiple brackets on a wall:
379 mm
14.9 in.
68 mm
2.7 in.
458 mm
(18.0 in.)
● Place brackets next to each other so that the
brackets touch.
● Distance from top mounting hole of one
bracket to top mounting hole of next bracket
should be 254 mm (10 in.) minimum.
● Vertical space between brackets should be
131 mm (5.2 in.) minimum.
● Lowest bracket should not be less 610 mm
(24 in.) from the floor.
● Maximum of four brackets vertically.
Refer to the MC95XX Series Mobile Computer
Integrator Guide for detailed instructions for
installing cradles and chargers on the brackets.
254 mm
(10 in.)
254 mm
(10 in.)
254 mm
(10 in.)
79 mm
(3.1 in.)
123 mm
(4.8 in.)
131 mm
(5.2 in.)
610 mm
(24 in.)
FLOOR
Loading...