Fork Truck Holster
For MC9000 Mobile Computers
Quick Reference Guide
Fork Truck Holster Quick Reference Guide
© 2014 Symbol Technologies, Inc.
Zebra reserves the right to make changes to any product to improve reliability, function,
or design.
Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Zebra products might be used. An
implied license only exists for equipment, circuits, and subsystems contained in Zebra
products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol
logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies
company.
Zebra Technologies Corporation
Lincolnshire, IL USA
http://www.zebra.com
Introduction
The MC9000 Fork Truck Holster and Protective Boot enable mounting the
MC9000 Series Mobile Computer to a horizontal or vertical surface.
About This Guide
This Quick Reference Guide describes procedures for the following:
• Installing the Protective Boot
• Inserting the MC9000 into a Cradle on page 2
• Installing the Fork Truck Holster on page 3
• Inserting the MC9000 into the Holster on page 4.
For detailed information on the MC9000 series mobile computer, see the Quick
Reference Guide or Product Reference Guide for the mobile computer.
Installing the Protective Boot
To install the protective boot onto the MC9000 Mobile Computer:
1. Insert the bottom (keypad end) of the mobile computer into the bottom
end of the boot.
2. Fit the top of the boot over the top of the mobile computer.
1
Loading...