Zebex Z 900XBT User Manual

Important Notice

No warranty of any kind is made in regard to this material, including, but not limited
to, implied warranties of merchantability or fitness for a particular purpose. We are
not liable for any errors contained herein or incidental or consequential damages in
connection with furnishing, performance or use of this material.
No part of this document may be reproduced, transmitted, stored in a retrieval
system, transcribed, or translated into any language or computer language in any
form or by any means electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without express written consent and authorization.
We reserve the right to make changes in product design without reservation and
without notification. The material in this guide is for information only and is subject
to change without notice.
All trademarks mentioned herein, registered or otherwise, are the properties of their
various respective owners.

For CE-Countries

This scanner is in conformity with CE standards. Please note that an approved,
CE-marked power supply unit should be used in order to maintain CE conformance.

Laser Safety

The laser scanner complies with safety standard IEC 60825-1 for a Class 2 laser
produce.

Laser Light Viewing: The scan window is the only aperture through which laser light
may be observed from this product. A failure of the scanner motor, while the laser
diode continues to emit a laser beam, may cause emission levels to exceed those for
safe operation. The scanner has safeguards to prevent this occurrence. If,
however, a stationary laser beam is emitted, the failing scanner should be
disconnected from its power source immediately.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with same or
equivalent type.

Z-900XBT

Quick Guide

Scanner Outline

Scan Window

LED

Indicator

Battery Battery
Lock Com

partment

Hand Strap

Battery Contacts

Description Function

Scan Window Emits a red beam for barcode reading
Battery Compartment Batteries are stored here
Battery Lock Secures the battery compartment
Hand Strap Hole Used to attach hand straps
LED Indicator Indicates the scanning status
LCD Screen Display various data when a program is being run

Keypad

Battery Contacts For charging battery
Buzzer Emits audible indication sounds

A total of 21 keys are provided to the power and
other function keys

LCD
Screen

Keypad

Buz

zer

Package Contents

Items contain in the package may vary depending on the model of the data collector.

Data Collector Cradle Li-ion Battery

USB Cable Power Adapter Hand Strap

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

z Reorient or relocate the receiving antenna.

z Increase the separation between the equipment and receiver.

z Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

z Consult the dealer or an experienced radio/TV technician for help.

15.21

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

15.19

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter, except in accordance with FCC multi-transmitter RF exposure

procedures.

2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.