Zebex Z-325x Quick Manual

ASCII Table

A B

C D

E F G H

I J K L

M N O P

Q R S T

U V W X

Y Z

0 1 2 3

4 5 6 7

8 9

Enter

Scanner Outline

Description Function

Micro USB slot Used for communication and charging
LED Indicator Indicates the scanning status
Power Button/Scan Trigger Press to power on or scan barcodes
Off Button Press to turn the device off
Hand Strap Hole Used to attach hand straps
Back Cover Lock Secures the battery compartment
Battery Compartment Batteries are stored here
Scan Window Emits a red beam for barcode reading

Package Contents

Items contain in the package may vary depending on the model of the scanner.

Wireless scanner

with battery

*Dongle

(Optional)

Quick Guide

USB Cable Power Adapter Hand Strap

*Note: Actual product appearance may vary from the images on this page.

593-3325XE-001

Micro USB

slot

Back Cover
Lock

LED

Indicator

Power Button/

Scan Trigger

Battery
Compartm

ent

Off Bu tton/

Function Button

Hand Strap

Hole

Scan Window

Important Notice

No warranty of any kind is made in regard to this material, including, but not limited
to, implied warranties of merchantability or fitness for a particular purpose. We are
not liable for any errors contained herein or incidental or consequential damages in
connection with furnishing, performance or use of this material.

Laser Safety

The laser scanner complies with safety standard IEC 60825-1 for a Class 2 laser
produce.

Charging the Device

Installing Battery

1. Unlock and remove the back cover then insert the battery.

2. Place the back cover back on the scanner and move the lock to the lock
position.

Charging the Battery

There are two method to charge scanner via USB cable.

 Host USB Power
 Power adaptor

1. Connect the micro USB connector directly to the scanner.

2. Connect the other end of the USB connector to the host to begin
charging. You can also connect the USB cable to an outlet using the
power adapter to charge the battery.

3. The battery begins charging when the scanner LED indicator starts

flashing. LED turns steady green when charging is completed.

Power On/Off the Device

1. Ensure the battery is fully charged. Please refer to the previous section
to charge the battery.

2. Press and hold the Power Button for 1 second until a long beep sound
is heard to turn on the scanner.

3. To power off the scanner press and hold the Off Button for 1 second
until 2 short beeps are heard.

Pairing the Device

SPP Slave Mode (PC as Host)

To connect a wireless device to Window based system for the first time:

1. Turn on the host computer and activate its wireless connection.

2. Select “Add wireless device”. Or open the dialog BT devices and click
“Add”.

3. Power on the scanner and program it with “SPP Slave mode” label.

Start

Scanner SPP slave enable

End

4. On Devices tab, click Add. This will open the Add wireless Device
Wizard.

5. Select the "My device is set up and ready to be found" checkbox, and
then click Next.

6. The scanner should be on the list of discoverable devices. The default
name of the scanner is “Z-325X”. Select “Z-325X” and click “Next”.

7. Select “Let me choose my own passkey” and enter the pin code. The
default pin code is “12345678.

8. Click “Next” to connect the scanner to the host. A short beep should be
heard upon connection.

SPP Master Mode (Scanner as Host)

1. Power on of the remote device and have its address ready in hand and
make it discoverable.

2. Program the scanner with the “SPP Master enable” barcode.

Start

Scanner SPP Master enable

3. Scan “Set wireless address” to set the address.

Set wireless address

(SPP Master only)

4. Use the ASCII table in previous section to input the 12 digit wireless
address. For example: if the address is “011B1345600”, scan “0”, “0”,
“1”, “1”, “B”, “1”, “3”, “4”, “5”, “6”, “0”, “0” from ASCII barcode labels. Or
scan the address lable if available.

5. Scan “Confirm Setting” to store the address.

Confirm Setting (for address and

pin code setting required)

6. Setup and input the pin code if necessary. Scan “Required Pair with
slave (SPP Master)” to begin pairing.

Required Pair with slave (SPP Master)

BT HID/Smart Phone Mode

1. Power on the scanner and program it with “BT HID Mode” if necessary.
To connect a smart mobile phone (for example, iPhone, Android), the
Smart phone mode must also be enabled.

*Note: Scanner is preprogrammed with BT HID mode as default.

Start

BT HID mode

Smart phone mode

End

2. Enable wireless connection on your host and set it to discover other
wireless devices in its surrounding.

3. The scanner should be on the list of discoverable devices. The default
name of the scanner is “Z-325X”. Select “Z-325X” from the list and you
will be prompted to enter a paring pin code.

4. To input the pin code, use the scanner to scan the ASCII table in
previous section. For example: if the pin code is “0111”, scan “0”, “1”,
“1”, “1” from ASCII barcode labels.

5. Scan the Enter barcode to confirm.

6. A short beep should be heard upon connection.

Multimedia Keyboard Mode

Multimedia keyboard mode allows you to display soft keyboard on the iPad

when you press the scanner function button.

1. Power on the scanner and enable “ Multimedia Keyboard mode ”.

Start

Multimedia keyboard

mode

Warning:

Do not open with force.
Please unlock before opening.

End

2. Enable wireless connection on your host and set it to discover other
wireless devices in its surrounding.

3. The scanner should be on the list of discoverable devices. The default
name of the scanner is “Z-325X”. Select “Z-325X” from the list.

4. Use the scanner to scan the ASCII table in previous section to input pin
code. For example: if the pin code is “0111”, scan “0”, “1”, “1”, “1”
from ASCII barcode labels.

5. Scan the Enter barcode to confirm.