Start to operate the Z-2121
Fimware Operstion and Start Guide…………………………………………….22
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/253 / 47
Preface
About This Manual
Thank you for your purchase of the ZEBEX Z-2121 Portable Data
Collector. ZEBEX Z-2121 product is at the forefront of data collector
technology, and this manual will provide the necessary information on
the many and varied options available to you.
The Z-2121 product is a compact, ergonomic, modular and durable
data collector. It is designed for easy upgrade with an integrated BT
communication, 1D barcode scanner and vibration. The design is ideal
for the mobile worker as i t simple and easy to use anywhere along a
supply chain.
Symbols used in this manual
ZEBEX INDUSTRIES INC.
A triangular shape indicates you should exercise
caution.
A circle shape indicates something you should not to
do.
A black circle indicates something you must to do.
A note symbol indicates you the information that is
important and you should be observed.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/254 / 47
Copyright
ZEBEX Industries Inc. makes no warranty of any kind with regard to
this material. Including but not limited to the imply warranties of
merchantability and fitness for a particular purpose. ZEBEX Industries
Inc. shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing,
performance or use of this product.
ZEBEX Industries Inc. will be under no liability in respect of any defect
arising from fair wear and tear, willful damage, negligence, abnormal
working conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without written approval.
No part of this document may be reproduced, transmitted, stored in a
retrieval system, transcribed or translated into any language or
computer language in any form or by any means electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, with
express writ- ten consent and authorization.
ZEBEX INDUSTRIES INC.
We reserve the right to make changes in product design without
reservation and without notification. The material in this guide is for
information only and is subject to change without notice.
ZEBEX is a registered trademark of ZEBEX INDUSTRIES INC.
Your safety is of the utmost importance so please observe and follow
the following guidelines that allow you to use the scanner in a safe
and responsible wa y.
Laser Safety
The Z-2121 series Portable Data Collector co mplies with safety
standard IEC825-1(1993) for a Class 2 laser product. It also complies
with U.S.21CFR1040 as applicable to a Class II laser product. Avoid
staring at direct laser light as the laser beam may hurt your eyes.
LASER BEAM
Never look directly into the laser beam.
Doing so can cause serious eye damage.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/255 / 47
Safety Operation
Disassembly and Modification
ZEBEX INDUSTRIES INC.
WARNING
Never try to disassemble or modify the device in any way.
servicing should be carried out be qualified Zebex personnel or
Zebex- approved e ngineers.
All
Interior Parts and Components
Never touch interior high voltage parts or components. Doing
so creates the danger of electrical shock.
Drop and Knock the Device
Be careful when using the device; do not drop or knock the
device as irreversible damage to the unit may occur.
Extreme temperature
Do not operate the device under extreme temperature.
Battery and Charger
The use of third-party battery or charger may either damage the
device or shorten the life of the device.
CAUTION
Dropping and Damage
Should the drop the device and damage it, immediately turn off
the power and contact your original dealer or an authorized
ZEBEX service provider. Continued use creates the danger of
fire and electrical shock.
Abnormal Conditions
Should the device become hot or start to emit smoke or an
original dealer or an authorized ZEBEX service provider.
Continued use creates the danger of fire and electrical shock.
Foreign Objects
Should any foreign matter ever get into the device, immediately
turn off the power and contact your original dealer or an
authorized ZEBEX service provider. Continued use creates the
danger of fire and electrical shock.
Moisture
Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/256 / 47
ZEBEX INDUSTRIES INC.
Federal Communication Commission (FCC)
Statement
15.21
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in the accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: This device may
not cause interference;
This device must accept any interference, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operated in conjunctionwith any
other antenna or transmitter.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/257 / 47
Unpacking
Package Contents
Z-2121 series selection
Portable Data Termi nal
ZEBEX INDUSTRIES INC.
u
Travel charger
Type: North America/Japan/
Taiwan/Europe
USB cable
Battery Pack
OR
RS-232 DB9 (F) Cable AC Adapter
(Terminal connect to PC USB port)
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/258 / 47
Optional Parts
Cradle package
ZEBEX INDUSTRIES INC.
AC Adapter
Purchaseable accessories
USB Cable
RS-232 DB9 (F) CableUSB AC Adapter
Main
Battery
AC Adapter
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/259 / 47
General Guide
3
ZEBEX INDUSTRIES INC.
1
2
4
1LED indicator (Right)
2LCD screenDisplay various data when a program is being run.
3Scan buttonThe trigger of Barcode reading.
4Keypad
5Scan windowsEmits a laser for bar code reading.
6BatteryMain battery
Communication port Communication with PC or charge by USB port
7
Indicates the status of battery charge :
Red for battery just on charging and Green for full.
A total of 26 keys are provided to the power and other
function keys.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2510 / 47
Getting Started
Inserting the Battery
When inserti ng the battery for the first time, follow these directions:
1-3. Push the top lock to pick up the battery pack.
5-4. Insert the battery as shown.
6-7. Put the battery cover back.
ZEBEX INDUSTRIES INC.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2511 / 47
Remove the Battery
1. Turn the power off.
2. Remove the back cover.
3. Press the battery against the Z-2121 terminal, and lift it up and
away from the compartment.
4. Put the cover back.
ZEBEX INDUSTRIES INC.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2512 / 47
Charging the Battery
The Li-ion rechargeable battery can be charged while inserted in the
device itself or independently via the recharging slot at the back of the
cradle.
Charging by cable
Connect the charging cable and USB AC adaptor as shown.
ZEBEX INDUSTRIES INC.
Charging by cradle
1. Put the Z-2121 on the cradle as shown in figure 2.
2. Connect the power adapter to the DB-9 (female) connector
3. Insert the power adapter to the wall socket.
Note 1:
1. The cradle can be connected both to the power adaptor for
battery charging and to the host computer for data uploading
as well as downloading at the same time.
2. To charge the battery, connect the power plug of the power
supply into the power jack on the DB-9 female connector.
3. The DB-9 (female) connector is used for battery charging and/or
communication with the PC.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2513 / 47
ZEBEX INDUSTRIES INC.
4. Battery charging and data exchange can be done at the same time
or respectively. The Z-2121 D ata Collector, however, is unable to
communicate with the host computer when placed on the cradle
without the battery attached to it.
5. The battery is always charged via the cradle. There are two ways
to charge the battery. First, take the battery out from the Z-2121,
and insert it in the back slot of the cradle for fast charging, as
shown in Fig 3, which takes about 3 hours before it is fully
charged; second, put the battery in the Z-2121, and place it on
the cradle, with the Z-2121 either on or off, for slow charging, as
shown in Fig 2. This will need approximately 6 hours. To
maximize the battery’s life span, it is recommended that slow
charging be adopted unless there is a need for fast charging.
6. While the battery is being charged within the Z-2121 on the
cradle, data can still be exchanged between the PC and the
Z-2121 via the DB-9 connector and the RS-232 port.
7. The battery should stay on the cradle (either with the terminal or
independently) for at least 12 hours before being used the first
time or after months of idleness.
Charging the Battery separately in the cradle
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2514 / 47
ZEBEX INDUSTRIES INC.
Insert the battery into the compartment at the rear of the cradle.
Connect the power jack to the cradle and plug AC adapter into the
socket.
NOTES
Whe n charging the battery for the first time, charge for
at l east 12 hours prior to use.
SubjectVersionDate Page
Z-2121 series User’s Manual1.00 2009/11/2515 / 47
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.