Zebex Z 2070HFR, Z 2070 User Manual
Handheld Computer
Z-2070 series ( Version 2.0.0)
User’s Manual
ZEBEX INDUSTRIES INC.
Editorial Record
Version Date of edited Page
Ver2.00 2008/3/2 25~46
Ver2.00 2008/3/2
47~51
ቚу Using the Zebex Power Pack
ቚу How to order
Content
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 2 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Table of Contents
Preface
Unpacking
Getting Start
Using Barcode Scanner
About This Manual ...................................................................................................... 4
Symbols used in this manual .......................................................................... 4
Copyright ...................................................................................................................... 5
Safety Information....................................................................................................... 5
Laser Safety ........................................................................................................ 5
Safety Operation ................................................................................................ 6
Federal Communication Commission (FCC) Statement............................. 7
Package Contents .......................................................................................................8
Optional Parts .............................................................................................................. 9
Cradle package ...................................................................................................9
Purchaseable accessories ............................................................................. 10
General Guide ............................................................................................................ 11
Inserting the Battery ................................................................................................. 14
Remove the Battery .................................................................................................. 14
Charging the Battery.................................................................................................15
Charging by cable............................................................................................ 15
Charging by cradle .......................................................................................... 15
Charging the battery separately in the cradle............................................. 17
System Reset ............................................................................................................. 18
Using the Warm reset function...................................................................... 18
Using the Cold reset function........................................................................ 18
PC System Requirements ........................................................................................19
Connecting To PC ..................................................................................................... 19
Connecting via USB Cradle ...........................................................................19
Connecting the Z-2070 directly via USB cable ........................................... 20
About The Product ....................................................................................................21
Prerequisites.....................................................................................................21
Specifications ................................................................................................... 22
Scanning Barcodes...................................................................................................23
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 3 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Preface
About This Manual
Thank you for your purchase of the ZEBEX Z-2070 handheld
computer. ZEBEX Z-2070 product is at the forefront of handheld
computer technology, and this manual will provide the necessary
information on the many and varied options available to you.
The Z-2070 product is a compact, ergonomic, modular and durable
handheld computer. It is designed for easy upgrade with an integrated
WiFi wireless communication, 1D barcode scanner and RFID HF
solution. The design is complies with IP54 regulations and ideal for the
mobile worker as it simple and easy to use anywhere along a supply
chain.
Symbols used in this manual
A triangular shape indicates you should exercise
caution.
A circle shape indicates something you should not to
do.
A black circle indicates something you must to do.
A note symbol indicates the information is important
and you should observe.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 4 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Copyright
ZEBEX Industries Inc. makes no warranty of any kind with regard to
this material. Including but not limited to the imply warranties of
merchantability and fitness for a particular purpose. ZEBEX Industries
Inc. shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing,
performance or use of this product.
ZEBEX Industries Inc. will be under no liability in respect of any defect
arising from fair wear and tear, willful damage, negligence, abnormal
working conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without written approval.
No part of this document may be reproduced, transmitted, stored in a
retrieval system, transcribed or translated into any language or
computer language in any form or by any means electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, with
express writ- ten consent and authorization.
We reserve the right to make changes in product design without
reservation and without notification. The material in this guide is for
information only and is subject to change without notice.
ZEBEX is a registered trademark of ZEBEX INDUSTRIES INC.
© Copyright 2008 ZEBEX.
Safety Information
Your safety is of the utmost importance so please observe and follow
the following guidelines that allow you to use the scanner in a safe
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 5 / 52
and responsible way.
Laser Safety
The Z-2070 series handheld computer complies with safety standard
IEC825-1(1993) for a Class 2 laser product. It also complies with
U.S.21CFR1040 as applicable to a Class II laser product. Avoid
staring at direct laser light as the laser beam may hurt your eyes.
LASER BEAM
Never look directly into the laser beam. Doing so can cause
eye damage.
Version
Date
Page
ZEBEX INDUSTRIES INC.
Safety Operation
WARNING
Disassembly and Modification
Never try to disassemble or modify the device in any way.
servicing should be carried out be qualified Zebex personnel or
Zebex- approved engineers.
Interior Parts and Components
Never touch interior high voltage parts or components. Doing
so creates the danger of electrical shock.
Drop and Knock the Device
Be careful when using the device; do not drop or knock the
device as irreversible damage to the unit may occur.
Extreme temperature
Do not operate the device under extreme temperature.
Battery and Charger
The use of third-party battery or charger may either damage the
device or shorten the life of the device.
All
CAUTION
Dropping and Damage
Should the drop the device and damage it, immediately turn off
the power and contact your original dealer or an authorized
ZEBEX service provider. Continued use creates the danger of
fire and electrical shock.
Abnormal Conditions
Should the device become hot or start to emit smoke or an
original dealer or an authorized ZEBEX service provider.
Continued use creates the danger of fire and electrical shock.
Foreign Objects
Should any foreign matter ever get into the device, immediately
turn off the power and contact your original dealer or an
authorized ZEBEX service provider. Continued use creates the
danger of fire and electrical shock.
Moisture
Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 6 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Federal Communication Commission (FCC)
Statement
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a FCC Class B digital device, pursuant to part 15B of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in the accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: This device may
not cause interference;
This device must accept any interference, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 7 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Unpacking
Package Contents
u
Travel charger
Z-2070 series selection
Taiwan/Europe
Mobile Data Terminal
Type: North America/Japan/
USB cable
Stylus Pen
(Terminal connect to PC USB port)
Sling (for stylus Pen)
Battery Pack
Hand Strip
Hand strip Holder
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 8 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Optional Parts
Cradle package
Docking Cradle
Travel charger
RS232 Cable
(Connect from cradle tp PC)
USB cable
(From Cradle to PC USB port)
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 9 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Purchaseable accessories
USB Cable
(Terminal connect to PC USB port)
RS232 Cable
Travel charger
Britain Plug head
U.S. Plug head
USB cable
(From Cradle to PC USB port)
Australia Plug head
Main
Battery
Stylus Pen Europe Plug head
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 10 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Sling (for stylus Pen) Hand Strip
Hand strip Holder Britain Adapter Head
Australia Adapter Head
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 11 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
General Guide
12
3
jkl
stu
F1 F2 F4F3
ENTENT
SCAN
def3ghiabc
1
2
mno
4
5
6
vwx
8
79
@
0
4
pqr
5
yz
6
12
7
8
9
10
11
1 LED indicator (Left)
2 LED indicator (Right)
Indicates the status of read bar code :
Green for successful read.
Indicates the status of battery charge :
Red for battery just on charging and Green for full.
3 LCD screen Display various data when a program is being run.
4 Scan button The trigger of Barcode reading.
5 Keypad
6 Reset switch (inside the hole)
A total of 29 keys are provided to the power and other
function keys.
Use reset needle (take off the other side of stylus pen
cover) to press the RESET switch located inside the hole.
7 Scan windows Emits a laser for bar code reading.
8 Buzzer Outputs operation confirmation tones.
9 Stylus pen
For touch screen operation and needle for press RESET
switch.
10 Hand strip Protects the Handheld Terminal to drop.
11 Battery Main battery
12 Communication port Communication with PC or charge by USB port
Subject
Version
Date
Page
Z-2070 series User’s Manual 1.00 2008/7/1 12 / 52
ZEBEX INDUSTRIES INC.
Escape Key
SCAN
1
jkl
4
stu
7
Power Key
F1 F2 F4F3
Tab Key
2
5
8
0
def3ghiabc
mno
vwx
@
ENTENT
pqr
6
yz
9
Shift Key
Enter Key
Backspace Key
Arrow Key
Alphanumeric Key
Function Key
Space Key
Using the Keypad
ENT Enter key Press to confirm entries or commands.
to move cursor and deletes the previous character
BS Backspace key
Arrow Arrow keys
0-9 Alphanumeric keypad Press to enter
F1-F4 Function keys Press to access function keys 1-4.
SP Space key Press to add a space character.
SF/Fn Shift key
TAB Tab key Press to add a tab indention.
Power
Press
each time.
Press these to move around the screen.
numerical or alphabetical
The key is used in combination with other keys to type
special characters or perform other function keys.
1. Press after SF/Fn key and press Up key to turn the
input method into upper alphabetical.
2. Press after SF/Fn key and press Down key to turn the
input method into lower alphabetical.
3. Press after SF/Fn key and press Left or Right key to
turn the input method into numerical.
4. Press after SF/Fn key and press F1-F4 key to perform
F5 - F8 key.
1. Press to turn the power on.
2. Press more then 3 seconds for turn the terminal power
off and go into the suspend mode.
data.
ESC Escape key Press to perform a cancel action.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 13 / 52
Version
Date
Page
ZEBEX INDUSTRIES INC.
Getting Started
Inserting the Battery
Insert the battery pack as shown and watch the battery direction..
Remove the Battery
Push the side lock to pick up the battery pack.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 14 / 52
Version
Date
Page
AC P
ower
RS232/COM port Interfa
ce
ZEBEX INDUSTRIES INC.
Charging the Battery
The Li-ion rechargeable battery can be charged while inserted in the
device itself or independently via the recharging slot at the back of the
cradle.
Charging by cable
Connect the charging cable and USB AC adaptor as shown.
Charging by cradle
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 15 / 52
USB Interface
Cradle - rear view
Version
Adapter
Jack In
Date
Page
Left LED
ZEBEX INDUSTRIES INC.
Right LED
Cradle-front view
Cradle LEDs
Left LED - The LED lit when a battery is inserted into the rear battery
slot of the cradle for recharge. It remains lit until the
charge is complete.
Right LED - The LED lit when the cradle is connected to AC power.
Subject
Z-2070 series User’s Manual 1.00 2008/7/1 16 / 52
Version
Date
Page
Loading...