Page 1
ZEBEX INDUSTRIES INC.
1
Page 2
ZEBEX INDUSTRIES INC.
Editorial Record
Version Date of edited Page Content
Ver 2.00 2009/3/2 9 Revise the picture of Package contents
Ver 2.00 2009/3/2 10 Revise the picture of Cradle Package
Ver 2.00 2009/3/2 11,12 Revise the picture Purchaseable accessories
Ver 2.00 2009/3/2 26~52Adding the instruction of Using PowerPack
Ver 2.00 2009/3/2 53~56 Adding the picture of How to order
Ver 3.00 2010/1/25 26~49 Updated PowerPack Functions and pictures
Ver 3.00 2010/3/16 30~39 Adding GPRS User Manual
Ver 3.00 2010/3/19 1~26 Adding New Photo for Z-2065
Ver 3.00 2010/3/19 50~51 Updating Wifi setting section for summit
Ver 3.00 2011/8/19 13 Corrected General Guide
Ver 4.00 2013/7/23 41~61 Updated PowerPack section
Ver 4.00 2014/9/19 13
Corrected item 8 to SIM card slot
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 1 / 70
Page 3
ZEBEX INDUSTRIES INC.
Table of Contents
Preface............................................................................................................................. 4
About This Manual .................................................................................................. 4
Copyright................................................................................................................. 5
Safety Information ................................................................................................... 6
Laser Safety..................................................................................................... 6
Safety Operation .............................................................................................. 6
WARNING
........................................................................................................ 6
CAUTION
......................................................................................................... 7
FCC Statement ................................................................................................ 8
FCC RF Radiation Exposure Statement........................................................... 8
Unpacking........................................................................................................................9
Package Contents................................................................................................... 9
Optional Parts ....................................................................................................... 10
Cradle package.............................................................................................. 10
Purchasable Accessories ............................................................................... 11
General Guide ............................................................................................................... 13
Getting Started.............................................................................................................. 15
Inserting the Battery .............................................................................................. 15
Remove the Battery .............................................................................................. 15
Charging the Battery ............................................................................................. 16
Charging by cable .......................................................................................... 16
Charging by cradle......................................................................................... 16
Cradle LEDs................................................................................................... 17
Charging the battery separately in the cradle................................................. 17
System Reset........................................................................................................ 19
Using the Warm reset function....................................................................... 19
Using the Cold reset function ......................................................................... 19
PC System Requirements ..................................................................................... 20
Connecting To a PC .............................................................................................. 20
Connecting via the RS232 ............................................................................. 20
Connecting via USB Cradle ........................................................................... 21
Inserting SD Card.................................................................................................. 22
Remove the SD Card ............................................................................................ 22
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 2 / 70
Page 4
ZEBEX INDUSTRIES INC.
About The Product .......................................................................................................23
Prerequisites ......................................................................................................... 23
Hardware Required ............................................................................................... 24
Specifications ........................................................................................................ 24
Using Barcode Scanner ............................................................................................... 26
Scanning Barcodes ............................................................................................... 26
Using RFID Scanner (Optional) ................................................................................... 27
Scanning RFID...................................................................................................... 27
RFID Scanning Position ........................................................................................ 27
To scan a RFID ..................................................................................................... 28
Reading UID.......................................................................................................... 28
RW 15693 ............................................................................................................. 29
RW Mifare ............................................................................................................. 30
UltraLight............................................................................................................... 31
Terminal GPRS User’s Guide....................................................................................... 32
Make New Connection .......................................................................................... 32
Set Connection Properties .................................................................................... 34
Phone Number ...................................................................................................... 36
Set Dial Properties ................................................................................................ 37
Connect to GPRS Service..................................................................................... 39
Disconnect GPRS Service .................................................................................... 40
Using the Zebex PowerPack........................................................................................ 41
Backlight................................................................................................................ 41
Calculator .............................................................................................................. 43
File Transfer
.......................................................................................................... 44
Ex. File Transferred Operation By Using Bluetooth
......................................... 45
Function Key Manager
........................................................................................... 47
Function Key Manager Set Up Instruction...................................................... 48
GPS Information.................................................................................................... 51
Preload Manager
................................................................................................... 52
Preload Operation.......................................................................................... 53
RFID...................................................................................................................... 55
Switch.................................................................................................................... 56
Scan Manager ...............................................................................................................58
Backup/Restore
..................................................................................................... 61
Firmware Information
............................................................................................. 62
How to order.................................................................................................................. 64
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 3 / 70
Page 5
ZEBEX INDUSTRIES INC.
Preface
About This Manual
Thank you for your purchase of the ZEBEX Z-2065 series handheld
computer. ZEBEX Z-2065 series product is at the forefront of handheld
computer technology, and this manual will provide the necessary
information on the many and varied options available to you.
The Z-2065 series product is a compact, ergonomic and durable
handheld computer. It is designed with an integrated 802.11b/g wireless
communication, 1D/2D barcode scanner, touch screen and 29-keys
keypad. The design is complies with IP64 regulations and ideal for the
mobile worker as it simple and easy to use anywhere along a supply
chain.
Symbols used in this manual
A triangular shape indicates you should
exercise caution.
A circle shape indicates something you should
not to do.
A black circle indicates something you must to do.
A note symbol indicates you the information that is
important and you should be observed.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 4 / 70
Page 6
ZEBEX INDUSTRIES INC.
Copyright
ZEBEX Industries Inc. makes no warranty of any kind with regard to this
material. Including but not limited to the imply warranties of
merchantability and fitness for a particular purpose. ZEBEX Industries
Inc. shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing, Performance
or use of this product.
ZEBEX Industries Inc. will be under no liability in respect of any defect
arising from fair wear and tear, willful damage, negligence, abnormal
working conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without written approval.
No part of this document may be reproduced, transmitted, stored in a
retrieval system, transcribed or translated into any language or
computer language in any form or by any means electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, with express writ- ten
consent and authorization.
We reserve the right to make changes in product design without
reservation and without notification. The material in this guide is for
information only and is subject to change without notice.
ZEBEX is a registered trademark of ZEBEX INDUSTRIES INC.
© Copyright 2014 ZEBEX.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 5 / 70
Page 7
ZEBEX INDUSTRIES INC.
Safety Information
Your safety is of the utmost importance so please observe and follow
the following guidelines that allow you to use the scanner in a safe and
responsible way.
Laser Safety
The Z-2065 series handheld computer complies with safety standard
IEC825-1(1993) for a Class 2 laser product. It also complies with
U.S.21CFR1040 as applicable to a Class II laser product. Avoid staring
at direct laser light as the laser beam may hurt your eyes.
LASER BEAM
Never look directly into the laser beam. Doing so can cause
serious eye damage.
Safety Operation
WARNING
Disassembly and Modification
Never try to disassemble or modify the device in any way.
All
servicing should be carried out by qualified Zebex personnel or
Zebex- approved engineers.
Interior Parts and Components
Never touch interior high voltage parts or components. Doing so
creates the danger of electrical shock.
Drop and Knock the Device
Be careful when using the device; do not drop or knock the
device as irreversible damage to the unit may occur.
Extreme temperature
Do not operate the device under extreme temperature.
Battery and Charger
The use of third-party battery or charger may either damage the
device or shorten the life of the device.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 6 / 70
Page 8
ZEBEX INDUSTRIES INC.
CAUTION
Subject Version DatePage
Dropping and Damage
Should the drop the device and damage it, immediately turn off
the power and contact your original dealer or an authorized
ZEBEX service provider. Continued use creates the danger of
fire and electrical shock.
Abnormal Conditions
Should the device become hot or start to emit smoke or an
original dealer or an authorized ZEBEX service provider.
Continued use creates the danger of fire and electrical shock.
Foreign Objects
Should any foreign matter ever get into the device, immediately
turn off the power and contact your original dealer or an
authorized ZEBEX service provider. Continued use creates the
danger of fire and electrical shock.
Moisture
Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.
Z-2065 series User’s Manual 4.00 2014/9/19 7 / 70
Page 9
ZEBEX INDUSTRIES INC.
FCC Statement
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
the accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 8 / 70
Page 10
ZEBEX INDUSTRIES INC.
Unpacking
Package Contents
AC Adapter
Z-2065 series
Mobile Data Terminal
Stylus Pen
RS-232 DB9 (F) Cable
Hand Strip
USB cable
(Terminal connect to PC USB port)
Hand strip Holder
Battery Pack
Sling for stylus Pen
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 9 / 70
Page 11
ZEBEX INDUSTRIES INC.
Optional Parts
Cradle package
Docking Cradle RS232 cable
AC Adapter
USB cable
(Cradle to USB)
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 10 / 70
Page 12
ZEBEX INDUSTRIES INC.
Purchasable Accessories
RS232 Cable
AC Adapter
RS-232 DB9 (F) Cable
Britain Plug head
USB cable (Cradle to USB)
U.S. Plug head
Battery Pack
Australia Plug head
Stylus Pen
Europe Plug head
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 11 / 70
Page 13
ZEBEX INDUSTRIES INC.
Hand Strip for stylus Pen Sling for stylus Pen
Hand strip Holder
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 12 / 70
Page 14
ZEBEX INDUSTRIES INC.
General Guide
jkl4
7
stu
1abc
ESC
ENT
SP
F2
F4
F3
9
vwx8
yz
65mno pqr
BS
F1
32
def ghi
ENT
SCAN
RESET
0
@
1 LED indicator
Indicates the status of read bar code or battery charge :
Green for successful read barcode or full charge of battery.
Red for battery just on charging.
2 Buzzer Outputs operation confirmation tones.
3
LED indicator for
WI-FI
Flashes in red when operating via WLAN communication
4 LCD screen Display various data when a program is being run.
5 Stroke keys
A total of 29 keys are provided to turn power ON or OFF and other
operations.
6
Reset switch (inside
the hole)
Use reset needle (take off the other side of stylus pen cover) to press the
RESET switch located inside the hole.
7 Scan button For Barcode reading.
8
SIM card slot For GPRS SIM card
9 Mini SD I/O card slot Install the Mini SD I/O card
10 Scan windows Emits a laser for bar code reading.
11 RS-232 port This port is for RS-232 communication with PC
12 Stylus pen For touch screen operation and press RESET switch.
13 Hand strip Protects the Handheld Terminal to drop.
14 Battery Main battery
15 Sling
Sling for stylus pen
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 13 / 70
Page 15
ZEBEX INDUSTRIES INC.
4 jkl F2
F3
F4
SP
stu7
yz
98vwx
5mno 6pqr
ENT
BS
F1
1abc
ESC
2
def
3ghi
ENT
RESET
SCAN
0
@
Arrow Arrow keys
Press these to move around the screen.
ENT Enter key
Press
to
confirm entries or commands.
0-9 Alphanumeric keypad
Press
to
enter
numerical or alphabetical
data.
F1-F4 Function keys
Press
to
access function keys 1-4.
BS Backspace key
Press
to move cursor and deletes the previous character
each time.
Power/Backlight on key
1. Press to turn the power on.
2. Press more then 3 seconds for turn the terminal power
off and go into the suspend mode.
3. Press to turn the LCD backlight on when it is off.
ESC Escape key
Press to perform a cancel action.
SCAN Scan key
Press and hold to scan a barcode.
SF/Fn Shift key
The key is used in combination with other keys to type
special characters or perform other function keys.
1. Press after SF/Fn key and press Up key to turn
the
input method into upper alphabetical.
2. Press after SF/Fn key and press Down key to turn
the
input method into lower alphabetical.
3. Press after SF/Fn key and press Left or Right key to
turn
the input method into numerical.
4. Press after SF/Fn key and press F1-F4 key to perform
F5 - F8 key.
TAB Tab key
Press to add a tab indention.
SP Space key
Press to add a space character.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 14 / 70
Page 16
ZEBEX INDUSTRIES INC.
Getting Started
Inserting the Battery
Insert the battery pack as shown and watch the battery direction.
Remove the Battery
Push the side lock to pick up the battery pack.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 15 / 70
Page 17
ZEBEX INDUSTRIES INC.
Charging the Battery
The Li-ion rechargeable battery can be charged while inserted in the device itself or
independently via the recharging slot at the back of the cradle.
Charging by cable
Connect the charging cable and AC adaptor as shown.
Charging by cradle
Cradle - rear view
Subject Version DatePage
Jack In
AC Power
Adapter
USB interface
RS232/COM port Interface
Z-2065 series User’s Manual 4.00 2014/9/19 16 / 70
Page 18
ZEBEX INDUSTRIES INC.
Cradle - front view
Left LED
Right LED
Cradle LEDs
Left LED - The LED lit when a battery is inserted into the rear battery slot of the
cradle for recharge. It remains lit until the charge is complete.
Right LED - The LED lit when the cradle is connected to AC power.
Charging the battery separately in the cradle
Insert the battery into the compartment at the rear of the cradle.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 17 / 70
Page 19
ZEBEX INDUSTRIES INC.
Connect the power jack to the cradle and plug AC adapter into the socket.
NOTES
When charging the battery for the first time, charge for at least
12 hours prior to use.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 18 / 70
Page 20
ZEBEX INDUSTRIES INC.
System Reset
Using the Warm reset function
Warm reset function allows you to return the device to the default settings, while not
wiping all data from the memory.
Insert the needle into the reset hole as shown and press down gently, to reset the
device.
6pqr5mno
0
8vwx
stu
7
SP
yz
9
F4
F3
ENTENT
1
2
def
jkl
4
abc
ESC
F1
3
ghi
F2
BS
SCAN
RESET
0
@
Using the Cold reset function
Cool reset function allows you to return the device to the factory settings, while wiping
all data from the memory.
Press down and hold the power key and Insert the needle into the reset hole to cold
reset the device.
WARNING
Cold reset will erase ALL pre-configured data on the scanner.
Check
carefully to make sure you have uploaded all important
files to
your PC before proceeding with the reset.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 19 / 70
Page 21
ZEBEX INDUSTRIES INC.
PC System Requirements
Windows XP Operating System
64 MB RAM
50 MB free HDD space
Interface : USB / RS-232 ports
WLAN transmitter (optional)
Bluetooth transmitter/receiver (optional)
Connecting To a PC
In order to use the software supplied with the Z-2065, the mobile data terminal must be
connected to a PC.
Connecting via the RS232
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 20 / 70
Page 22
ZEBEX INDUSTRIES INC.
Connecting via USB Cradle
The cradle must also be connected via one of your PC’s USB ports. Attach one end of
the cable to the USB interface on the cradle and the other to your PC.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 21 / 70
Page 23
ZEBEX INDUSTRIES INC.
Inserting SD Card
1. Make sure the power is turn off.
2. Open the SD Slot cover as shown, Insert the SD card.
3. Close the SD slot Cover.
Remove the SD Card
1. Make sure the power is turn off.
2. Open the SD Slot cover as shown, Take off the SD card.
3. Closed the SD slot cover.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 22 / 70
Page 24
ZEBEX INDUSTRIES INC.
About The Product
ZEBEX Z-2065 WinCE.NET Handheld Computer comes with the one and only
Jacket-module design, and makes most user friendly features to select as desired.
The Jacket-module is a module at the back of device that is selectable in GPRS, GPS,
RFID, WLAN or Bluetooth communications and 1D or 2D scanning engine, it satisfies
all application from indoor to outdoor and from warehouse to transportation logistics.
Z-2065 qualifies to use in most difficult environments with its rugged design with IP64
standard.
Further more, its round shape back design allow it to sit in palm fitly for best operation
comfort, and for future expansion, it has a gun grip design to broaden its application
into more categories. Z-2065 has an unbeatable technology and ergonomic design
that upgrades your with power.
Prerequisites
Skills Required
The following skills are required by developers aiming to develop application software
for the ZEBEX Z-2065 series.
● Windows programming
● Good knowledge of one or more of the following:
* Visual C++
* Visual Basic .NET
* Visual studio .NET
* Visual C#
* Active Server Pages and web programming
The following skills or experiences are also desirable.
● Windows CE devices
● ActiveSync
● Some networking experience.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 23 / 70
Page 25
ZEBEX INDUSTRIES INC.
Hardware Required
The following models of the ZEBEX Z-2065 series and the dedicated options are
available.
Available models and the features:
WLAN GPRS
Subject Version DatePage
(G
)
RFID(H
)
P/N (device only)
&
B
T
(WL)
Z-2065WL1
882- 65W100- 000
Z-2065WL2
882- 65W200- 000
Z-2065W1GS
1D 2D(SE4500) 2.5G HF
1
882-65W100-100
◆◆
2
882-65W200-100
◆◆
3
882-65W1GS-000
882-65W1GS-100
◆◆ ◆ ◆
4
882-65W2GS-100
◆◆◆◆
5 Z-2065W1GSH
882-65G1SH-000 882-65G1SH-100
◆◆ ◆ ◆◆
6 Z-2065W2GSH
882-65G2SH-000 882-65G2SH-100
◆◆◆◆◆
7 ◆◆ ◆
8
882-65W2G0-100
◆◆◆
9 ◆◆ ◆
10
882-65W2S0-100
◆◆ ◆
11 ◆◆ ◆
12
882-65W2H0-100
◆◆ ◆
Model P/N(include accessory)
Barc od
Z-2065W2GS
882- 65W2GS-00 0
Z-2065W1G
882-65W1G0-000 882-65W1G0-100
Z-2065W2G
882- 65W2G0-00 0
Z-2065W1S
882-65W1S0-000 882-65W1S0-100
Z-2065W2S
882- 65W2S0-0 00
Z-2065W1H
882- 65W1H0-0 00 88 2-6 5W1H0-100
Z-2065W2H
882- 65W2H0-0 00
e
GPS(S)
Specifications
Model Z-2065 series
System
CPU Inter PXA 270 processor (Max. 520MHz)
RAM 128 Mbyte
F-ROM 64 Mbyte
LCD Display 3.5”, QVGA 240 X 320 TFT color panel with
touch screen
Operating System Microsoft Windows CE.NET 5.0
Power Management
Main Battery 3.7V5,000mAH Li-ion rechargeable battery
3.7V 2,200 mAH Li-ion rechargeable 3.7V, 120mAH, Li-Poly rechargeable battery
Battery Life 8 hours (without wireless communication
activated)
Scanning Performance
Scan Engine Symbol SE-955 1D laser engine
Symbol SE-4400 2D image engine (optional)
Light Source 650 nm visible Laser Diode
Z-2065 series User’s Manual 4.00 2014/9/19 24 / 70
Page 26
ZEBEX INDUSTRIES INC.
Scan Rate 100 scans per second
Print Contrast 30% @ UPC/EAN 100%
Decoding Capability
Barcode Symbologies UPC/ EAN/ JAN, Code 128/EAN 128, Code 39,
Code 93, Interleaved 2 of 5, Discrete 2 of 5,
Codabar, MSI/Plessey
Card Slots 1 x Mini SD I/O card
Communications / Interfaces
Bluetooth Bluetooth Class 2
IrDA Standard IrDA 1.3
USB USB 2.0
RS-232 Programmable up to 115,200 bps
WLAN 802.11b/g (optional)
Dimensions 190.5 mm (L) x82..8 mm (W) x 50.5 mm (H)
Weight Approx. 480 g (battery included)
Environmental
Operating Temp. 0°C ~ 50°C
Storage Temp -10°C ~ 60°C
Operating Humidity 10% ~ 70% (non-condensing)
Storage Humidity 5% ~ 70% (non-condensing)
Drop Durability Withstand 1.2m ( 4 feet) drop to concrete
Environmental Sealing IP64 rated sealing
Regulatory Approvals CE & FCC Part 15B, 15 C,CE RF,LVD,ESD
Cradle Single slot USB / RS-232 charging cradle with
spare battery slot
Software &Development Microsoft VC 6.0 development environment
Supports SDK for program development
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 25 / 70
Page 27
ZEBEX INDUSTRIES INC.
Using Barcode Scanner
Scanning Barcodes
The Z-2065 is a highly versatile tool that can scan a wide range of barcodes but it is
imperative that it is used in the correct manner.
To scan a barcode:
1. Hold the Z-2065 horizontally and point it directly at the barcode you wish
to scan.
2. Once in the correct position, press the SCAN button.
An audible alarm is heard and the barcode digits will appear on the
LCD screen if the scan is successful.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 26 / 70
Page 28
ZEBEX INDUSTRIES INC.
Using RFID Scanner (Optional)
Scanning RFID
To open RFID demo program, you can find the program located in the
Programs/PowerPack.
RFID Scanning Position
RFID scan module was installed in the back of terminals. The devices can read from
30 to 50mm distance from the back-side of terminals.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 27 / 70
Page 29
ZEBEX INDUSTRIES INC.
To scan a RFID
After opening RFID demo program, you will see main menu displayed
as below. There are three main functionalities such as “UID”, “15693”, “Mifare” and
“UltraLight”. Please follow below steps to read UID.
Reading UID
1. Select UID type, then confirm by pressing “Start” button. Demo
program provide three UID types such as 15693, 14443A, and
14443B.
2. User can also adjust scanning rate by selecting how many msec for
scanning once. Then confirm by clicking “Timer” button.
3. After scanning UID, it will be shown on column at the bottom of
display. Data in column can be clear by pressing “Clear” button.
4. If user need to switch to another UID type, UID type by can be cancel
by pressing “Stop” button. Then user can select another UID type as
demand.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 28 / 70
Page 30
ZEBEX INDUSTRIES INC.
RW 15693
On 15693 function window, user can read and write information from
RW 15693 UID card:
1. Set up protocol by pressing “SetProtocol” button, place UID card
within valid range and press “CheckUID” button. The UID will display
in the red circle of below diagram.
2. To read data from certain Block, first input the location in column next
to Read Block. Then confirm by pressing “Read Block” button. Read
Data will appear in column showed in green circle of below diagram.
3. To write UID from certain Block, first input the location in column next
to ”Write Block” button, then write the data into the longer column in
blue circle. Confirm written data by pressing “Write Block” button.
4. Information appear at bottom can be clear by pressing “Clear” button.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 29 / 70
Page 31
ZEBEX INDUSTRIES INC.
RW Mifare
On RW 15693 function window, user can read and write information from
Mifare UID card:
1. Place UID card within valid range, check UID by pressing “Open
Card ” button. UID will display in red circle shown in below diagram.
2. To perform read and write commands, please refer to “RW 15693”
sections.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 30 / 70
Page 32
ZEBEX INDUSTRIES INC.
UltraLight
On UltraLight window, user can read and write information from UltraLight UID
card:
1. To read data from UID card, press the “Read” button. Read Data will
appear on the screen.
2. To write UID card, write the data into the column next to the “Write”
button. Confirm written data by pressing “Write” button.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 31 / 70
Page 33
ZEBEX INDUSTRIES INC.
Terminal GPRS User’s Guide
Make New Connection
1. Click “Network and Dial-Up Connections” in the settings. Show as
below figures.
2. Click “Make New Connection” to create the new connection. Show as
below figures.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 32 / 70
Page 34
ZEBEX INDUSTRIES INC.
3. Select the “Dial-Up Connection” and press” Next” button to make
anew connection. Show as below figure.
4. Press “Next“ button to select the modem.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 33 / 70
Page 35
ZEBEX INDUSTRIES INC.
Set Connection Properties
1. Select Internal GPRS Modem and press the “Configure” button to
change the settings of properties.
Subject Version DatePage
2. Change the Baud Rate to 115200 in Port Settings. Show as below
figure.
Z-2065 series User’s Manual 4.00 2014/9/19 34 / 70
Page 36
ZEBEX INDUSTRIES INC.
3. Input the dial string in Call Option. Show as below figure. Input
+CGDCONT=1,”IP”,”APN” to set the APN for GPRS connection. For
the setting of known APN around the work, please refer below link:
http://www.quickim.com/support/gprs-settings.html
4. Press “OK” button to complete the settings.
5. Press “Phone Number” button to set the phone number.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 35 / 70
Page 37
ZEBEX INDUSTRIES INC.
Phone Number
1. Set phone number to *99# or *99***1#. This number depends on the
service provider. Show as below figure.
2. Press OK button to finish the settings of new connection.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 36 / 70
Page 38
ZEBEX INDUSTRIES INC.
Set Dial Properties
1. Double Click the connection.
2. Press the “Dial Properties” button.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 37 / 70
Page 39
ZEBEX INDUSTRIES INC.
3. Create new one or select one setting in the Location and press the
“Edit” button.
4. Set the Dialing Patterns as below figure.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 38 / 70
Page 40
ZEBEX INDUSTRIES INC.
Connect to GPRS Service
1. Press the “Connect” button.
2. During the Dial-Up. The screen shows the status as below figure.
3. It shows below figure when connected to GPRS service.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 39 / 70
Page 41
ZEBEX INDUSTRIES INC.
Disconnect GPRS Service
1. Double click the connection icon in taskbar.
2. Press the “Disconnect” button.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 40 / 70
Page 42
ZEBEX INDUSTRIES INC.
Using the Zebex PowerPack
To save your time and effort in developing applications on Z-2065, ZEBEX provides it’s
own design system management tool to called “PowerPack” to let you control it
directly.
The PowerPack management tools which installs in each of our WinCE product. It is
free charge for you. We offer several function for let you control your device without
any programming.
Backlight
This application is set up the Backlight of LCD Panel and Key pad. It allows operators
to set backlight duration, and also backlight can be set up as On & Off.
The Backlight Setting screen including 2 parts:
LCD Panel
Keypad
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 41 / 70
Page 43
ZEBEX INDUSTRIES INC.
The LCD Panel setting:
Auto Timeout: This function can be used to set up the LCD backlight to be auto
off after certain period of inactivity. You can set up the Auto off time from 15 sec
to 15 min using the Timer setup as illustrated below.
Always ON: This function can set up the backlight to be always on until the
system goes into suspend mode.
Always OFF: This function can set up the backlight to be always off.
The Keypad Backlight setting:
Auto Mode: This function can be used to set up the keypad backlight to be auto
off after certain period of inactivity. The interval of the time for auto off is fixed on
5 seconds.
Always ON: This function can set up the keypad backlight to be always on until
the system into suspend mode.
Always OFF: This function can set up the backlight to be always off.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 42 / 70
Page 44
ZEBEX INDUSTRIES INC.
Calculator
This calculator function allows operators to add, subtract, multiply, and divide that
simply provide basic logistic function in our daily basis.
The upper zone of the display area displays the memory content, and the lower zone
is key pad.
Button description:
MC : Clear buffer of memory.
MR : Got the value of buffer.
MS : Storage the value to buffer.
M+ : Append the value to the buffer.
CE : Clear the display area to “0”, but keep the value in buffer.
C : Clear the display and the buffer of memory.
+/- : Change the value sign form Plus to Minus or Minus to Plus.
0~9 : Numeric key.
/ : Division function.
＊ : Multiplication function.
－ : Subtraction function.
＋ : Addition function.
﹒ : A decimal point of dot.
＝ :To be equal to, The amount.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 43 / 70
Page 45
ZEBEX INDUSTRIES INC.
File Transfer
File Transfer is a simple file transferring function tool, the tool can transfer file to
another devices via Bluetooth. Communication agreement of file transferring was
adopted with OBEX agreement which shared with cell phone or Notebook PC. So you
can simply use this function to transfer file to cell phone or Notebook PC, or doing file
transferring between two terminals.
File Transfer is capable to auto-search devices with Bluetooth communication, so all
devices within valid range will be listed in window of “1. Select Remote Device”.
Function Instructions:
1. Select Remote Device
All devices with Bluetooth Communication functions are listed on the
display.
Query : For searching usable devices.
Stop : Stop searching.
Connect : For connecting with one device.
Disconnect : For disconnecting with current devices.
2. Select Transfer File
Select file need to be transferred, press bottom for selecting file.
3. Start Transfer : Start transferring file to targeted devices.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 44 / 70
Page 46
ZEBEX INDUSTRIES INC.
Ex. File Transferred Operation By Using Bluetooth
File Transferring by using Bluetooth:
Make sure Bluetooth devices was activated, Bluetooth Communication Devices can
be activated under Switch Function within PowerPack software utilities.
1. Select “Query“ for searching Bluetooth devices, below window will
pop up on display.
2. Select Bluetooth devices for receiving file, select “Connect” for
connecting with devices, or select “Disconnect” to disconnect with
current devices.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 45 / 70
Page 47
ZEBEX INDUSTRIES INC.
3. Click ” … ” bottom to select the file need to be transferred, then
click ”OK ” bottom to confirm.
4. Select “Start Transfer” bottom to start file transferring.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 46 / 70
Page 48
ZEBEX INDUSTRIES INC.
Function Key Manager
This application utility is provides you an easier way to set up function key for your
device. Through using this function key set up utility you will easily and quickly to start
the application program like, Window Media Player, Calculator… etc, or your own
designed application program, and even the windows system function, like increasing
or decreasing the volume or doing the adjustment of brightness on LCD panel.
You can find this application is located on path “\settings\control Panel\”.
Program provides eight different function key (F1~F8) for set up, default setting was
shown as below:
F1: SIP ON/OFF。
F2: Backlight Manager。
F3: Power Switch。
F4: Calculator.exe。
F5: Volume + 。
F6: Volume -。
F7: Backlight +。
F8: Backlight -。
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 47 / 70
Page 49
ZEBEX INDUSTRIES INC.
Function Key Manager Set Up Instruction
Enable/ Disable : Enable or Disable Function Key.
Internal Function :
SIP ON/OFF
Backlight Manager
Power Switch
Stylus Calibration
Wi-Fi ON/OFF
Bluetooth ON/OFF
Volume +
Volume –
Backlight +
Backlight –
Cut
Copy
Paste
Program File : Install application program according to demand, this function can be
used for setting up auto-execution.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 48 / 70
Page 50
ZEBEX INDUSTRIES INC.
Edit Internal Function items:
1. Select items need to be modified, select by clicking ”Edit” bottom to
enter set up window as below:
Subject Version DatePage
2. Select new functional item and complete editing.
Z-2065 series User’s Manual 4.00 2014/9/19 49 / 70
Page 51
ZEBEX INDUSTRIES INC.
Edit application software for auto-execution:
1. Select Program File item，then click ”Browse” bottom to enter File
2. Opening Window.
Subject Version DatePage
3. Select software required auto-execution, then select “OK” bottom to
complete selecting process.
Z-2065 series User’s Manual 4.00 2014/9/19 50 / 70
Page 52
ZEBEX INDUSTRIES INC.
4. Confirmed Function / Program had been updated within column.
Select by clicking ”OK“ bottom to complete editing process. When
Function Key Manager Main Page reappear on the display, F1 on
function key item lists had been updated to testkeypadChar.
GPS Information
The GPS Information allows operators to view GPS status and to setup the GPS
function during suspension.
Check/uncheck the “Keep Power During Suspend” check box to enable/disable the
function.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 51 / 70
Page 53
ZEBEX INDUSTRIES INC.
Preload Manager
The Preload Manager is an auto execution program after system boot for ZEBEX’s
WinCE device. You may set programs into the Preload list box and running the
program by automatically or manually.
Modify Window located on top of display, providing functionalities of Priority, Remove
and Browse.
Priority : Providing “UP”and “DOWN” two bottoms for adjusting priority on the
lists.
Edit : Providing ”Remove“ and “Browse..” two functionalities, below are
instructions:
Remove：Deleting selected functionalities.
Browse.：Selecting program for preloading, files can be selected from window
by clicking Browse bottoms.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 52 / 70
Page 54
ZEBEX INDUSTRIES INC.
Preload Operation
Selected Program:
1. By clicking ”Browse..”, below menu will appear, select preload
program by using folder. Programs can be selected more than once.
Subject Version DatePage
2. Confirming file by clicking “OK” will get back to Preload Manager
main page. Then complete its process.
Z-2065 series User’s Manual 4.00 2014/9/19 53 / 70
Page 55
ZEBEX INDUSTRIES INC.
Reset preload priority:
If the preload priority need to be set up to (1)play music -> (2)open explorer ->
(3)check everything, please follow steps listed below :
1. Select by clicking play music.exe program and click ”Up” bottom to
move up the music.exe.
2. Then select by clicking check everything program and click “Down”
bottom to move down check everything program.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 54 / 70
Page 56
ZEBEX INDUSTRIES INC.
Remove a program:
In order to remove “open explorer” program, select by clicking program, then select
“Remove” by clicking on bottom to finish command.
RFID
Please see Using RFID Scanner (Optional) for more information.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 55 / 70
Page 57
ZEBEX INDUSTRIES INC.
Switch
The WiFi, Bluetooth, and GPS switch utility. This application provides as a switch
function to let you easily turn on or off the function and power for WiFi Bluetooth, and
GPS interface. Window for setting up Wifi will pop up by double-clicking small icon
within red circle which shown as below diagram.
Under the content of “Profile”, the available wireless network access point will be
searching by clicking “Scan” button. You can select an access point and press
“Configure” button to connect with that network.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 56 / 70
Page 58
ZEBEX INDUSTRIES INC.
Existing access point can also be selected from Edit Profile shown as below diagram.
Under content of main menu, existing profile (WiFi) can be set up as Auto Profile.
Existing Profile lists can be viewed existing profile by clicking “List” button, check
profile and click on “OK” button. Select “On” from Auto Profile menu to complete Auto
Profile setting.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 57 / 70
Page 59
ZEBEX INDUSTRIES INC.
Scan Manager
The Scan Manager program is a barcode reader set up program, it offers you an easy
way to enable or disable the barcode scanner, and also offer you to set up each
barcode symbolic properties.
Below are instructions of functions on main page:
Output Mode: provides three output methods such as Copy & Paste / Key Emulation /
None (Copy to Clipboard).
Copy & Paste: Copy and paste the barcode information into application that
need to execute data as input. (ex. WordPad)
Key Emulation: Transfer barcode information via Key Emulation to executed
software’s edit window. Key Emulation function can also be used for barcode
scanning under conditions of Terminal Emulation, Command Prompt and some
other program without touch panel. Read data will be transferred to application
program.
None(copy to clipboard): Function provide required barcode information to
application program, after this function was activated, scanner will read barcode
information and save data into clipboard.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 58 / 70
Page 60
ZEBEX INDUSTRIES INC.
Terminal Character: Set the terminator control code with barcode data. It offers
“Enter”, “Space”, “Tab”, and “None” for selections. Terminator control code will
be sent every time when barcode was read.
Replace Character: Enter the value then check/uncheck to enable/disable the
function.
UTF-8 conversion: Check/uncheck to enable/disable the function.
Suffix: Set the suffix character with barcode data.
Prefix: Set the preamble character with barcode data.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 59 / 70
Page 61
ZEBEX INDUSTRIES INC.
Setting: To set the barcode parameter value of each kind of barcode for
barcode scanner. Press the "Setting" button in the application to start the
barcode setting.
To check the barcode type selection for enable the type of barcode for read, press the
"Properties" tab on top to see the barcode parameter value of each kind of barcode.
The default values of EAN/UPC code and Code39:
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 60 / 70
Page 62
ZEBEX INDUSTRIES INC.
Backup/Restore
You can find this application is located on path “\settings\control Panel\”.
This application provides you an easy way to backup or restore the device setting
information into Flash Disk and storage card. Application also provides selection of
Flash Disk when there is no storage card. When Mini SD Card was installed into
devices, program will auto-search and provides selection of SD Card from menu.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 61 / 70
Page 63
ZEBEX INDUSTRIES INC.
Backup: Select backup data as saved devices, press ”Backup” bottom to
proceed backup. Display will restore when backup was finished.
NOTES
Barcode settings are not backed up by this function. To back
up your barcode settings please use barcode
setting->Export/Import Setting.
Backup time may vary depending on the size of data you have
on the device.
When restoring system, you must select “Yes” to warm boot
the device to complete the process.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 62 / 70
Page 64
ZEBEX INDUSTRIES INC.
Firmware Information
This application will check and display the version information of the device’s operation
system and PowerPack utility.
You can find this application is located on path " \settings\control Panel\".
This information is good for identify device firmware version for future update or
maintenance.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 63 / 70
Page 65
ZEBEX INDUSTRIES INC.
How to order
Please offer Part Number or Model Name for next purchase.
1. Z-2065 Series Windows CE.NET Handheld Computer Set.
Part Number Model Name Description
882-65W100-100 Z-2065WL1
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT module/1D engine/RS-232
DB9(F) cable / USB interface
882-65W200-100 Z-2065WL2
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT module/2D imager/RS-232
DB9(F) cable / USB interface
882-65W1GS-100 Z-2065W1GS
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS/GPS module/1D
engine/RS-232 DB9(F) cable / USB interface
882-65W2GS-100 Z-2065W2GS
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS/GPS module/2D
imager/RS-232 DB9(F) cable / USB interface
882-65G1SH-100
Z-2065W1GS
H
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS/GPS module/1D
engine/RFID(H)/RS-232 DB9(F) cable / USB
interface
882-65G2SH-100
Z-2065W2GS
H
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS/GPS module/2D
imager/RFID(H)/RS-232 DB9(F) cable / USB
interface
882-65W1G0-100 Z-2065W1G
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS module/1D
engine/RS-232 DB9(F) cable / USB interface
882-65W2G0-100 Z-2065W2G
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPRS module/2D
imager/RS-232 DB9(F) cable / USB interface
882-65W1S0-100 Z-2065W1S
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPS module/1D
engine/RS-232 DB9(F) cable / USB interface
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 64 / 70
Page 66
ZEBEX INDUSTRIES INC.
882-65W2S0-100 Z-2065W2S
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT/GPS module/2D
imager/RS-232 DB9(F) cable / USB interface
882-65W1H0-100 Z-2065W1H
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT module/1D
engine/RFID(H)/RS-232 DB9(F) cable / USB
interface
882-65W2H0-100 Z-2065W2H
WindowsCE.NET Handheld Computer,
W/Wireless LAN/BT module/2D
imager/RFID(H)/RS-232 DB9(F) cable / USB
interface
Standard
Accessories
170-70R449-180 RS-232 Cable RS232 charging cable for
Z-2050/2065
173-0U0000-150 MINI USB Cable Terminal to PC USB port
862-206502-400 Battery Pack Lithium-Ion rechargeable battery
pack, 3.7V 5000 mAh
560-820500-741 Stylus Pen Length: 95.7cm, including reset
thimble
623-220500-061 Sling Sling for stylus pen
623-220650-051 Hand Strip Z-2065 hand strip and stylus pen
holder
560-020650-891 Hand Strip Holder Z-2065 hand strip holder
11S-900180-008 AC Adapter AC 100~240V 50/60HZ 0.6A, DC
9V/2A
11S-000000-008 Integrated Plug head for 11S-900180-008 Type: Britain/
U.S./Australia/Europe
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 65 / 70
Page 67
ZEBEX INDUSTRIES INC.
2. CRD-60 Communication and Battery charging Cradle Set.
Part Number Model Name
Description
882-60CR00-000
CRD-60
Z-2065 communication and battery
charging cradle
Standard Accessories
Subject Version DatePage
174-1RF050-150
RS-232 Cable
RS232 cable connect from CRD-60 to PC
RS-232 Dsub port.
173-0U3000-150
USB Cable
RJ45 USB type B cable connect from
CRD-60 to PC USB port.
PIN-OUT configuration
DB-9(F)
1 CD (Carrier detect)
2 TxD (Transmit data)
3 RxD (Receive data)
4 DSR (Data set ready)
5 GND (Signal ground)
6 DTR(Data terminal ready)
7 CTS (Clear to send
)
PIN-OUT configuration
1 NC
2 TxD (Transmit data)
3 RxD (Receive data)
4 NC
5 GND (Signal ground)
6 NC
7 CTS (Clear to send)
8RTS (Request to send
)
Z-2065 series User’s Manual 4.00 2014/9/19 66 / 70
Page 68
ZEBEX INDUSTRIES INC.
3. Z-2065 Series Optional Accessories
Subject Version DatePage
Part Number Model Name Description
170-70R449-180
RS-232 cable RS232 charging cable for Z-2050/2065
PIN-OUT configuration
DB-9 (Female)
1 CD (Carrier detect)
2 TxD (Transmit data)
3 RxD (Receive data)
4 DSR (Data set ready)
5 GND (Signal ground)
6 DTR (Data terminal ready)
7 CTS (Clear to send)
8 RTS (Request to send)
9 RI (Ring indicator)
173-0U0000-150
MINI USB Ca
ble Terminal to PC USB port
174-1RF050-150
RS-232 Cable
RS-232 cable connect from CRD-60 to PC
RS-2
32 Dsub port.
173-0U3000-150
USB Cable
RJ45 USB type B cable connect from
CRD-60 to PC USB port.
862-206502-400
Battery Pack
Lithium-ion rechargeable battery pack,
3.7V, 5000mAh
S
tylus Pen
560-820500-741
95.7mm, including reset thimble
Z-2065 series User’s Manual 4.00 2014/9/19 67 / 70
Page 69
ZEBEX INDUSTRIES INC.
Part Number
Subject Version DatePage
Model Name Description
623-220500-061 Sling Sling for stylus pen
623-220650-051 Hand Strip
Z-2065 hand strip and stylus pen
holder
560-020650-891 Hand Strip Holder Z-2065 hand strip holder
862-206502-400 AC Adapter
AC 100~240V 50/60HZ 0.6A, DC
9V/2A
11S-000000-008
Adapter Head
Britain type head ,interchangeable
plug, for 11S-900180-008 AC adapter
11S-000001-008 Adapter Head
U.S. type head ,interchangeable plug,
for 11S-900180-008 AC adapter
11S-000002-008 Adapter Head
Australia type head ,interchangeable
plug, for 11S-900180-008 AC adapter
11S-000003-008 Adapter Head
Europe type head ,interchangeable
plug, for 11S-900180-008 AC adapter
Z-2065 series User’s Manual 4.00 2014/9/19 68 / 70
Page 70
ZEBEX INDUSTRIES INC.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 69 / 70
<< MEMO >>
Loading...