The default values of ITF 2 of 5 code and Code128.
SubjectVersionDate Page
Z-2065 series User’s Manual3.002010/3/1956 / 69
Page 2
ZEBEX INDUSTRIES INC.
Backup/Restore
You can find this application is located on path “\settings\control Panel\”.
This application provides you an easy way to backup or restore the device
setting information into Flash Disk and storage card. Application also provides
selection of Flash Disk when there is no storage card. When Mini SD Card
was installed into devices, program will auto-search and provides selection of
SD Card from menu.
SubjectVersionDate Page
Z-2065 series User’s Manual3.002010/3/1957 / 69
Page 3
ZEBEX INDUSTRIES INC.
Backup : Select backup data as saved devices, press ” Backup ” bottom to
proceed backup. Display will restore when backup was finished.
ʳ
SubjectVersionDate Page
Z-2065 series User’s Manual3.002010/3/1958 / 69
Page 4
ZEBEX INDUSTRIES INC.
Firmware Information
This application will check and display the version information of the device’s
operation system and PowerPack utility.
You can find this application is located on path " \settings\control Panel\".
!
!
This information is good for identify device firmware version for future update
or maintenance.
!
!
!
!
!
!
!
!
!
!
!
!
!
SubjectVersionDate Page
Z-2065 series User’s Manual3.002010/3/1959 / 69
Page 5
ZEBEX INDUSTRIES INC.
Function Key Manager
This application utility is provides you an easier way to set up function key for
your device. Through using this function key set up utility you will easily and
quickly to start the application program like, WindowMedia Player,
Calculator… etc, or your own designed application program, and even the
windows system function, like increasing or decreasing the volume or doing
the adjustment of brightness on LCD panel.
You can find this application is located on path “\settings\control Panel\”.
Program provides eight different function key (F1~F8) for set up, default
setting was shown as below:
F1: SIP ON/OFFǶ
F2: Backlight ManagesǶ
F3: Power SwitchǶ
F4: Calculator.exeǶ
F5: Volume + Ƕ
F6: Volume -Ƕ
F7: Backlight +Ƕ
F8: Backlight -Ƕ
SubjectVersionDate Page
Z-2065 series User’s Manual3.002010/3/1960 / 69
Page 6
ZEBEX INDUSTRIES INC.
Function Key Manager Set Up Instruction:
Enable/ Disable : Enable or Disable Function Key
Provide two set up methods of Internal Function and Program File
Internal Function : Provide following options,
SIP ON/OFF
Backlight Manager
Power Switch
Stylus Calibration
Wi-Fi ON/OFF
Bluetooth ON/OFF