Zebex Z-2060 User Manual

Handheld Computer

Z-2060 series ( Version 1.00 )
User’s Manual

ZEBEX INDUSTRIES INC.

WWW.ZEBEX.COM

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 2 / 23

Editorial Record

Version Date of edited Page

Content

1.00 2008.12.18 20 Available models and the features

1.00 2008.12.18 21 Specifications

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 3 / 23

Table of Contents

Preface

About This Manual ..........................................................................................................4

Symbols used in this manual ..............................................................................4

Copyright ...........................................................................................................................5

Safety Information...........................................................................................................5

Laser Safety.............................................................................................................5

Safety Operation ....................................................................................................6

Federal Communication Commission (FCC) Statement ..............................7

Unpacking

Package Contents............................................................................................................8

Optional Parts...................................................................................................................9

Cradle package.......................................................................................................9

Purchaseable accessories...................................................................................9

General Guide .................................................................................................................10

Getting Start

Inserting the Battery .....................................................................................................12

Remove the Battery.......................................................................................................12

Charging the Battery.....................................................................................................13

Charging by cable................................................................................................13

Charging by cradle...............................................................................................13

Charging the battery separately in the cradle...............................................14

System Reset..................................................................................................................16

Using the Warm reset function ...........................................................................16

Using the Cold reset function .............................................................................16

PC System Requirements............................................................................................17

Connecting To a PC .......................................................................................................17

Connecting via the RS232 .................................................................................17

Connecting via USB Cradle...............................................................................18

Connecting the Z-2060 directly via Mini USB ...............................................18

Inserting SD Card ..........................................................................................................19

Remove the SD Card.....................................................................................................19

About The Product........................................................................................................20

Prerequisites .........................................................................................................20

Specifications .......................................................................................................21

Using Barcode Scanner

Scanning Barcodes.........................................................................................................22

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 4 / 24

Preface

About This Manual

Thank you for your purchase of the ZEBEX Z-2060 series handheld
computer. ZEBEX Z-2060 series product is at the forefront of
handheld computer technology, and this manual will provide the
necessary information on the many and varied options available to
you.

The Z-2060 series product is a compact, ergonomic and durable
handheld computer. It is designed with an integrated 802.11b/g
wireless communication, 1D/2D barcode scanner, touch screen and
29-keys keypad. The design is complies with IP 64 regulations and
ideal for the mobile worker as it simple and easy to use anywhere
along a supply chain.

Symbols used in this manual

A triangular shape indicates you should exercise
caution.

A circle shape indicates something you should not to
do.

A black circle indicates something you must to do.

A note symbol indicates you the information that is
important and you should be observed.

FCC RF Radiation Exposure Statement:

This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.

1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 5 / 23

Copyright

ZEBEX Industries Inc. makes no warranty of any kind with regard to
this material. Including but not limited to the imply warranties of
merchantability and fitness for a particular purpose. ZEBEX Industries
Inc. shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing,
Performance or use of this product.

ZEBEX Industries Inc. will be under no liability in respect of any defect
arising from fair wear and tear, willful damage, negligence, abnormal
working conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without writ ten approval.

No part of this document may be reprod uced, transmitted, stored in a
retrieval system, transcribed or translated into any language or
computer language in any form or by a ny means electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, with
express writ- ten consent and authorization.

W e reserve the right to make changes in product design without
reservation and witho ut notification. The material in this guide is for
information only and is subject to change without notice.

ZEBEX is a registered trademark of ZEBEX INDUSTRI ES INC.
© Copyright 2008 ZEBEX.

Safety Information

Your safety is of the utmost importance so please observe and follow
the followi ng guidelines that allow you to use the scanner in a safe
and responsible way.

Laser Safety

The Z-2060 series handheld computer complies with safety standard
IEC825-1(1993) for a Class 2 laser product. It also complies with
U.S.21CFR1040 as applicable to a Class II laser product. Avoid
staring at direct laser light as the laser beam may hurt your eyes.

LASER BEAM

Never look directly into the laser beam. Doing so can cause
serious eye damage.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 6 / 23

Safety Operation

WARNING

Disassembly and Modificati on

Never try to disassemble or modify the device in any way.

All
servicing should be carried out be qualified Zebex personnel or
Zebex- appr oved e ngineers.

Interior Parts and Components

Never touch interior high voltage parts or components. Doing
so creates the danger of electrical shock.

Drop and Knock the Device

Be careful when using the device; do not drop or knock the
device as irreversible damage to the unit may occur.

Extreme temperature

Do not operate the device under extreme temperature.

Battery and Charger

The use of third-party bat tery or charger may either damage the
device or shorten the life of the device.

CAUTION

Dropping and Damage

Should the drop the device and damage it, immediately turn off
the power and contact your original dealer or an authorized
ZEBEX service provider. Continued use creates the danger of
fire and electrical shock.

Abnormal Conditions

Should the device become hot or start to emit smoke or an
original dealer or an authorized ZEBEX service provider.
Continued use creates the danger of fire and electrical shock.

Foreign Objects

Should any foreign matter ever get into the device, immediately
turn off the power and contact your original dealer or an
authorized ZEBEX service provider. Continued use creates the
danger of fire and electrical shock.

Moisture

Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 7 / 23

Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.

Federal Communication Commission (FCC)
Sta tement

15.21

You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.

15.105(b)
This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in the accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions: This device may
not cause interference;
This device must accept any interference, including interference that
may cause undesired operation of the device.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 8 / 23

Unpacking

Package Contents

AC Adapter

Z-2060 series

Mobile Data Terminal

USB cable

(Terminal to PC USB port)

Stylus Pen

RS-232 DB9 (F) Cable

Hand Strip

Battery Pack

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 9 / 23

Optional Parts

Cradle p ackage

RS232 cable

Docking Cradle

USB cable (Cradle to USB)

Purchaseable accessories

Mini USB Cable

Battery

RS232 Cable AC Adapter

Stylus Pen

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 10 / 23

SCAN

vwx

mno5

0

7 stu

8

ENT

1

4 jkl

abc

2 def

ESC

RESET

pqr6

.#

SP

yz

9

F4

F3

ENT

BS

F2

F1

ghi3

General Guide

1 LED indic ator

Indicates the status of read bar code or battery charge :
Green for successful read barcode or full charge of battery.
Red for battery just on charging.

2 Buzzer Outputs operation confirmation tones.
3 LED indicator for WI-FI Flashes in re d when operating via WLAN communication
4 LCD screen Display various data when a program is being run.

5 Stroke keys

A total of 29 keys are provided to turn power ON or OFF
and other operations.

6 Reset switch (inside the hole)

Use reset needle (take off the other side of stylus pen
cover) to press the RESET switch located inside the hole.

7 Scan button For Barcode reading.
8 Mini USB port This port is for USB communication with PC.

9 Ear Jack Listens to the voice.
10 Mini SD I/O card slot Install the Mini SD I/O card
11 Scan windows Emits a laser for bar code reading.
12 RS-232 port This port is for RS-232 communication with PC
13 Stylus pen For touch screen operation and press RESET switch.
14 Hand strip Protects the Handheld Terminal to drop.

15 Battery Main battery

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 11 / 23

4 jkl F2

F3

F4

SP

0 .#

stu7

yz

98vwx

5mno 6 pqr

ENT

BS

F11

abc

ESC

2def 3ghi

ENT

RESET

SCAN

Arrow Arrow keys

Pr ess thes e to move ar ound the screen.
ENT Enter key Press to confirm entries or c ommands.
0-9 Al phan umeric k eypad Press to enter

numerical or alphabetical

data.

F1-F4 Function k eys Press to ac cess function keys 1-4.

BS Backs pac e k ey

Press to

move cursor and deletes the previous character

each time.

Power/Backlight on key

1. Press to turn the power on.

2. Press more then 3 seconds for turn the terminal power
off and go into the suspend mode.

3. Press to turn the LCD backlight on when it is off.

ESC Escape key Press to perform a cancel action.
SCAN Scan key Press and hold to scan a barcode.

SF/Fn Shift key

The key is used in combination with other keys to type
special characters or perform other function keys.

1. Press after SF/Fn key and press Up key to turn

the

input method into upper alphabetical.

2. Press after SF/Fn key and press Down key to turn

the

input method into lower alphabetical.

3. Press after SF/Fn key and pr ess Left or Right key to
turn

the input method into numerical.

4. Press after SF/Fn key and press F1-F4 key to perform

F5 - F8 key.

TAB Tab key Press to add a tab indention.
SP Space key Press to add a space character.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 12 / 23

Getting Started

Inserting the Battery

Insert the battery pack as shown and watch the battery direction..

Remove the Battery

Push the side lock to pick up the battery pack.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 13 / 23

Charging the Battery

The Li-ion rechargeable batte ry can be charged while inserted in the
device itself or independently via the recharging slot at the back of the
cradle.

Charging by cable

Connect the charging cable and AC adaptor as shown.

Charging by cradle

USB Interfa ce

AC Power
Adapter
Jack In

RS232/COM port Interface

Cradle - rear view

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 14 / 23

Left LED

Right LED

Cradle - front view

Cradle LEDs

Left LED - The LED lit when a battery is inserted into the rear battery

slot of the cradle for recharge. It remains lit until the
charge is complete.

Right LED - The LED lit when the cradle is connected to AC power.

Charging the battery separately in the cradle

Insert the battery into the compartment at the rear of th e cradle.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 15 / 23

Connect the power jack to the cradle and plug AC adapter into the
socket.

NOTES

Whe n char gi ng the battery for the first time, char ge for at least
12 ho urs prior to use.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 16 / 23

RESET

System Reset

Using the Warm reset function

Warm reset function allows you to return the device to the default
settings, wile not wiping all data from the memory.

Insert the needle i nto the reset hole as shown and press

down

gentl y

, to

reset the device

.

Using the Cold reset function

Cool reset function allows you to return the device to the factory settings,
wile wiping all data from the memory.

Press down and hold the power key and I nsert the needle i nto the reset
hole

to cool reset the device

.

WARNING

Cold reset will erase ALL pre-configured data on the s canner.
Check carefully to make sure you have upl oad ed all imp or tant
fil es to your PC before proceeding with the r eset.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 17 / 23

PC System Requiremen ts

Windows XP Operating System
64 MB RAM
50 MB free HDD space
Interface : USB / RS -232 ports
WLAN transmitter (optional)

Connecting To a PC

In order to use the software supplied with the Z-2060, the mobile data
terminal must be connected to a PC.

Connecting via the RS232

In order for the sync software to work properly, the cradle must be
connected to your compute r’s COM port. Attach one end of the RS232
cable to the RS232/COM inter face connector on the cradle and the other
to the COM1 port on your PC.

1. Or can use attach one RS-232 cable to connect with your computer’s
COM port directly.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 18 / 23

Connecting via USB Cradle

The cradle must also be connected via one of your PC’s USB ports.
Attach one end of the cable to the USB interface on the cradle and the
other to your PC.

Connecting the Z-2060 directly via Mini USB

You can connect the Z-2060 directly to your PC, without the need for the
cradle, using the Mini USB cable, attaching it to the port on the left hand
side of the device.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 19 / 23

Inserting SD Card

1. Make sure the power is turn off.

2. Open the SD Slot cover as shown, Insert the SD card.

3. Close the SD slot Cover.

Remove the SD Card

1. Make sure the power is turn off.

2. Open the SD Slot cover as shown, Take off the SD card.

3. Closed the SD slot cover.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 20 / 23

About The Product

The Z-2060 is a compact, ergonomic and durable portable data terminal.
It is designed with an integrated wireless communication and 1D/2D
barcode data capture touch screen and 29-key keypad. The design is
ideal for the mobile worker as it simple and easy to use anywhere along
a supply cha in. It complies with IP64 regulations, and also support the
WLAN communication model by Z -2060WL.

The Z-2060 features a Intel PXA-270 processor (520MHz) and Windows
CE.NET version 5.0 operation system. This combination delivers high
performance, low power consumption and the diversity of a wireless
networking platform. Compared with other systems currently available
on the market, Z-2060 is the most cost-effective to offering optimum
performance.

Prerequisites

Skills Required
The following skills are required by developers aiming to develop

application software for the ZEBEX Z-2060 series.
? Windows programming

? Good knowledge of one or more of the following:

* Visual C++
* Visual Basic .NET
* Visual studio .NET
* Visual C#

* Active Server Pages and web programming
The following skills or experiences are also desirable.
? Windows CE devices

? ActiveSync
? Some th ing networking experience.

Hardware Required
The following models of the ZEBEX Z-2060 series and the dedicated

options are available.
Available models and the features:

Model name Barcode scanner IEEE802.11b/g

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 21 / 23

Specifications

Model

Z-2060 series

System

CPU

Inter PXA 270 processor (Max. 520MHz)

RAM

64 Mbyte

F- ROM

64 Mbyte

LCD Dis play

3.5”,

QVGA

240 X 320 TFT

color panel

with touch screen

Operating System

Microsoft Windows CE.NET 5.0

Power Management

Mai n Battery

3.7V 5,000mAH Li-i on r echargeable battery

Battery Life

8 hours (without wireless communication activated)

Scanning Performance

Scan Engine Symbol SE- 955 1D laser engine

Light Source

650 nm visible Laser Diode

Sc an Rate

100 s cans per s econd

Print Contrast

30% @ UPC/EAN 100%

Decoding Capability

Barcode Symbol ogies

UPC/ EAN/ JAN, Code 128/EAN 128, Code 39, Co de 93,
Interl eav ed 2 of 5, Discrete 2 of 5, Codabar, MSI/Plessey

Card Slots

1 x

Mini

SD I/O card

Communications / Interfaces

IrDA

Standard IrDA 1.3

USB

USB 2.0

RS -232

Pr ogrammable up to 115,200 bps

WLAN

802.11b/g ( optional)

Dimen sions

190.0 mm ( L) x 75.0 mm (W) x 46.6 mm ( H)

Weight

A pprox. 480 g ( battery included)

Environmental

O perating Temp.

0°C ~ 50°C
Storage Temp - 10°C ~ 60°C
O perating Hu mi dity 10% ~ 70% ( non-condensing)
Storage Humidity 5% ~ 70% ( non- condensing)
Drop Durability Withstand 1.2m ( 4 feet) drop to concrete
Environmental Sealing IP64 rated sealing
Regulatory A pprovals CE & FCC Part 15B, 15 C
Cradle Single slot USB / RS-232 charging cradle with spare

battery slot
Software &Development

Mi crosoft V C 6.0 development environme nt

S upports SDK for program developm ent

Using Barcode Scanner

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 22 / 23

Scanning Barcodes

The Z-2060 is a highly versatile tool that can scan a wide range of
barcodes but it is imperative that it is used in the correct manner.

To scan a barcode:

1. Hold the Z-2060 horizontally and point it directly at the barcode you
wish to scan.

2. Once in the correct position, press the SCAN button.

An audible alarm is heard and the barcode digits will appear on the
LCD screen if the sca n is successful.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Z-2060 series User’s Manual 1.00 2008/11/18 23 / 23

<< MEMO >>

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 2 / 33

Editorial Record

Version Date of edited Page

Content

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 3 / 33

Table of Contents

Preface

About This Manual.....................................................................................................4

Dsing the Zebex Power Pack

Backlight ......................................................................................................................8

Calculator...................................................................................................................10

EasyBeam..................................................................................................................11

File Transfer Operation...................................................................................12

Launcher ....................................................................................................................14

Launcher Operation ........................................................................................15

Switch .........................................................................................................................19

TrayScan .....................................................................................................................21

Backup/Restore ........................................................................................................24

Firmware Information..............................................................................................26

Shortcut Manager ....................................................................................................27

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 4 / 33

Preface

About This Manual

Thank you for your purchase of the ZEBEX WinCE base handheld
computer product. For reduced your software development effort and
save your time to development the application program on our WinCE
device. ZEBEX create our own design management solution, called
“Power Pack” utility, for let you control our WinCE device system function
easily.

The Power Pack utility was separated into two parts, single device
management utilities and group device management utilities. Single
device management utility was installed in each of our WinCE product. It
is free charge for you. We offer several function for let you control your
device witho ut any programming. And group device management utility
was offer you manage effectively the application software install and
upgrade in the sets of device, and also help you to take care of data
synchronization and communication. You do not need to cost more time
and money to develop such as the administrative system for the
large-scale special project again .

This manual is description and focus on single device management of
Power Pack utility, if you have interesting about our group device
management of Power Pack utility, please consult with our sales person
or district business partner for more information.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 5 / 33

The Single Device Management of Zebex Power Pack utility, Deposits
separately according to its function classification and located in your
device different path.

1. Location one: C:\Programs\PowerPack

2. Location two: C:\Control Panel

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 6 / 33

Location one (C:\Programs\PowerPack) a ltogether deposits six tool
software utilities:

1. Backlight : Screen and keyboard back light adjustment
program.

2. Calculator : Calculator program.

3. EasyBeam : The file transfer program.

4. Launcher : Application auto launch program.

5. Switch : WiFi switch program.

6. TrayScan : Barcode setting program.

Location two (C:\Control Panel ) altogether deposits three tool software
utilities:

1. Backup/Restore : System backup and restore program.

2. Firmware Information : System firmware edition information

program

3. Shortcut Manager : Function key set up program.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 7 / 33

Afterwards various chapters will be detailed introduced the step of
operation for each tool of Zebex Single Device Power Pack.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 8 / 33

Using the Zebex Power Pack

Backlight

This application is set up the Backlight of LCD Panel and Key pad. It
allows operators to set backlight duration, and also backlight can be set
up as On & Off.

The Backlight Setting screen including 3 parts:

1. LCD

2. Keypad

3. Brightness Control Bar

1. LCD: The LCD backlight setting.
Auto Mode: This model can be used to set up LCD backlight

lighting automatically off when the LCD hasn’t been
activated for certain interval from 15 sec.(Min) to 15
min.(Max).

Always ON: This function can set up the backlight to be always on

until the system into suspend or sleeping mode.

Always OFF: This function can set up the backlight to be always off.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 9 / 33

2. Keypad: The Keypad Backlight setting.
Auto Mode: This function can be set up the keypad backlight to be

auto off as keypad hasn’t been activated for certain
interval.

Always ON: This function can set up the keypad backlight to be

always on until the system into suspend or sleeping
mode.

Always OFF: This function can set up the backlight to be always off.

3. Brightness Control Bar: The brightness of the backlight can be

changed via control bar. Put up to light
and put down to dark.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 10 / 33

Calculator

This calculator function allows operators to add, subtract, multiply, and
divide that simply provide basic logistic function in our daily basis.

The upper zone of the display area displays the memory content, and the
lower zone is key pad.

Button description:

MC : Clear buffer of memory.
MR : Got the value of buffer.
MS : Storage the value to buffer.
M+ : Append the value to the buffer.
CE : Clear the display area to “0”, but keep the value in buffer.
C : Clear the display and the buffer of memory.
+/- : Change the value sign form Plus to Minus or Minus to Plus.
0~9 : Numeric key.

/ : Division function.

＊ : Multiplication function.
－ : Subtraction function.
＋ : Addition function.
﹒ : A decimal point of dot.
＝ : To be equal to, The amount.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 11 / 33

EasyBeam

The EasyBeam utility is a file trans fer program which transiting a data file
from one device to another. It was follow the public OBEX communication
protocol for file transfer. The OBEX communication protocol was also a
very popular protocol for Notebook PC or cell phone device. So you can
very easy to send a data file from ZEBEX’s WinCE device into Notebook
PC or cell phone for enhance the device application solution.

The EasyBeam file transfer program will check the device interface of
IrDA automatically. The a ll available transiting interface will be list in the

list box of “1. Sel ect Remote Device”.

1. Select Remote Device:
All IrDA or Bluetooth transit interface will be detected and listed in the

box automatically.

Connect : To connect to the selected device.
Disconnect : To disconnect the selected device.

2. Select Transfer File,

Choose the file to transfer.
Start Transfer : To start the file translation processes.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 12 / 33

File Transfer Operation

1. Transfer the data file via IrDA:

1.1 Prepare a pair of devices and making it as close as possible with

IrDA interface, th en the device will detected other one like the
following picture shown .

1.2 Select the receive device and press “Connect” button for start

the connection or press “Disconnect” button for stop the
connection.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 13 / 33

1.3 Click the “… ” button choose the file to transfer.

1.4 Click the “Start Transfer ” button, start the file transfer.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 14 / 33

Launcher

The Launcher utility is an auto execution program for ZEBEX’s WinCE
device. You may set programs into the Launcher list box and running the
program by automatically or manually.

1. Selected the check box of “□ Auto launch the checked items” will
running whole programs listed in the box automatically one by one.

2. The “Up” and “Down” button is to change the priority sequence of
each program. You can use it to arrange the sequence of list
according to its running priority.

3. “Description” dialog is description the function for the program.

4. “Target” dialog will be showing out the path of file. Click the “… ”
button and selected the target program then click the “OK” button to

finish and return to the Auto launch menu.

5. The “+” b utton is for adding a new program into the list by the
description of the program. You can not us e the same description for
difference program.

6. The “–” b utton is for removing a program from the list. After select a
program on list, this button will be enabled and click it to remove it.

7. The “Update” Button is to rename the description and file path for a
program. As a program selected this button will be enable, after input

the new description name or file path and click this button to update.

8. The “Launch” b utton is to execution all program on the list right away.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 15 / 33

Launcher Operation

1. Create a new program:

1.1 Input the description for the program.

1.2 Select the target file.

Click the “… ” button and select the program file then click “OK”
button to confirmed and return back to the Launcher menu.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 16 / 33

1.3 Click “+” button to add the program into list box.

2. Launch a program:

Selected the program and click the “Launch” button to execute the
program.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 17 / 33

3. Update the program description:

Select the program from list box and input the new description on the
“Description” field or use “… ” button to re-select the target path.
Then click “Update” button to confirm the change.

4. Remove a program:
Select a program form list box and click the “–” button to remove it.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 18 / 33

5. Change the running sequence of program:

Select the program which is desired to rearrange its running priority
sequence.

Click “UP”or “Down” button to adjust the running priority sequence.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 19 / 33

Switch

The WiFi switch utility. This application provides as a switch function to
let you easy turn on or off the function and po wer for WiFi interface.

To check the “OFF” selection from WiFi check box will disable the WiFi
function. On the other hand check the “ON” selection will enable the WiFi

function.

The available wireless network access point will be searching
automatically when you check the “ON” selection for enable WiFi function.
You can select an access point and press “Connect” button to connect
with that network.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 20 / 33

Double-click the “Add New… ” on the list box will add a new wireless
network, or double-click a n existed access point on the list box for open

the wireless properties for setting. You also can use “?” or ”?” button for
display more information for network setting.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 21 / 33

TrayScan

The TrayScan program is a barcode reader set up program, it offer you
an easy way to enable or disable the barcode scanner, and also offer you
to set up each barcode symbolic properties.

1. Enable Scanner
To check the selection will enable barcode scanner for ready to read,
uncheck the selection to disable barcode scanner function.

2. Emulate keyboard
Set the barcode scanner to send the barcode data to operation
system via emulate keyboard input. It will allow you to using terminal
emulation or command prompt application to use barcode scanner for
read the barcode data into your application,

3. Terminator
Set the terminator control code with barcode data. We offer “None”,
“Tab” and “CR/LF” for selection.

4. Preamble
Set the preamble character with barcode data.

5. Setting
To set the barcode parameter value of each kind of barcode for
barcode scanner.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 22 / 33

Barcode Setting:

Press the “Setting” button in Tra yScan application to start the barcode
setting.

To check the barcode type selection for enable the type of barcode for
read.

Press “more” button to setting the barcode parameter value of each kind
of barcode.

Press “Default” button to use system default value to set up the barcode
parameter. The default value was show in below pictures.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 23 / 33

The default values of EAN/UPC code and Code39.

The default values of ITF 2 of 5 code and Code128.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 24 / 33

Backup/Restore

This application provides you an easy way to backup or restore the
device setting information into storage card or PC via cradle connection.
So, don ’t forget prepare a mini-SD storage card or cradle connected with
PC before you running th e backup function.

You can find this application is located on path “\settings\control Panel\”.

There is a pop-up warming message advice you close all application and
stop running any program when you start the application.

To click “OK” button go to the Backup / Restore menu.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 25 / 33

Choose sources:

To select what kind the data you want to backup.

1. Registry

2. Database

3. Files/Directories

Choose Storage:
If you already insert the mini-SD memory storage card or connected with

PC via cradle, then you can choose the destination to store the data.

To click “Start” b utton start the Backup or Restore procedure.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 26 / 33

Firmware Information

This application will check and display the version information of the
device’s operation system and Power Pack utility.

You can find this application is located on path “\settings\control Panel\”.

This information is good for identify device firmware version for future
update or maintenance.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 27 / 33

Shortcut Manager

This application utility is provides you an easier way to set up function
key for your device. Through using this function key set up utility you will
easily and quickly to start the application program like, Window Media
Player, Calculator… etc, or your own designed application program, and
even the windows system function, like increasing or decreasing the
volume or doing the adjustment of brightness on LCD panel.

You can find this application is located on path “\settings\control Panel\”.

This application has two pages display, “Configuration” and “Assign
Function”. There are two buttons on the first page of “Configuration”,
button “Reset” and button “ >> ”.

Button “Reset” will restore the function key setting as factory default.
The factory default set is:

F1 & F5: Software Input Method On/Off

It is let you easy to wakeup or close the software keyboard on
the screen. You can use F1 or F5 function key to open or close
the software keyboard.

F2 & F6: Panel Brighter

Turn the screen backlight to bright.

F3 & F7: Panel Darker

Turn the screen backlight to dark.

F4 & F8: Calculator

Start the Calculator program.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 28 / 33

There are four function keys information display in one page. Button
“ >> ” for change to next page to display the other four function key’s

setting.

In the page of “Assign Function” offer you to reset the function keys.
This program use pushbutton operation to assign the function key you
want to setting.The program will catch the function ke y scan code and
display the set up page for setting. If you want to set F5 function key, you
need to press “SF/Fn” button first then press F1 to assign it. It’s mean
F5~F8 function key is compose of “SF/Fn” with F1~F4.

SF/Fn + F1 = F5
SF/Fn + F2 = F6
SF/Fn + F3 = F7
SF/Fn + F4 = F8

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 29 / 33

The message on the page of “Assign Function” was explain in below.

1. Button X: Indicates which function key of pushbutton

being assigned. For example, “Button 5”
means F5 function key being assigned.

2. Catalog: Including 4 standard catalogs for selection.

(1) Applications
(2) Z-2060 Shortcut s (for Z-2060 device)
(3) Windows S hortcuts
(4) IE Shortcuts

3. Function: Defines the standard function by deferent

the “Catalog” being selected.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 30 / 33

4. Specified Application: Setting others application program on the

device for the assigned function key .
After select this function, then press “… ”

button to assign an application for this
function key.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 31 / 33

5. Assign: Assigning the function key setting.

Press “Assign” button after you selected an
application of the shortcut for a function key.
The screen will change to the page of
“Configuration” and update the function
key setting information.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 32 / 33

6. Cancel: Cancel the function key setting.

Press “Cancel” button to cancel the current
function key setting and back to the original
display of page “Assign Function”.

ZEBEX INDUSTRIES INC.

1Subject 4Version =Date &Page

Power Pack Software Utility Operation Manual 0.9.4 2008/6/1 33 / 33

<< MEMO >>