zBoost YX400-P User Manual

EBOQ$T-ONE

YX4OO-P

FOR

SPRINT

AND

METRO.PCS

Set-up

Guide

The zBoost-ONETM

cell

phone

signal

booster extends

a Cell

Zone-

for

t- 4

phones/devices

on the

same

PCS carrier

(either

Sprint or

MetroPCS)

in homes or offices. zBoost-ONE

will boost

signal

up to

1200 sq ft

or up to 40 ft from

the zBoost

unit.

There are

two steps for setup:

FIRST: Sync

zBoost-ONE to

your

carrier network

(either

Sprint

or MetroPCS)

-

NOTE: This step only needs to be

performed

once

at the

beginning

ofyour

set-up

1. Place the

zBoost-ONE

unit

on a window sill

or location

of strongest

signal.

2. Connect the

zBoost

unit to

the

provided power

supply

and

plug

into a

power

outlet.

3.

The

Synclink

Button will flash red.

4. Make a call with

your

device. lf using a

wireless data

card,

make a connection

using

the

software

on

your

computer.

5. Press the Svnclink Button.

6.

The

SvncLink

Button will

blink

green

and the

Handset

lndicator

will

turn on.

NOTE: lf this does

not

happen,

then the

sync

has

failed.

Disconnect

the

power

from the

wall

outlet and

repeat steps.

SECOND:

find

the

best

position

for the zBoost-ONE

L.

2.

The

Sienal

Streneth

lndicator

reflects

the

signal level being received

by

the unit at the

window. Adjust

the angle

or

position

of the

zBoost-ONE

unit until

the strongest

possible

signal

is received

-

the most bars.

3 or more lit

bars will

provide

optimal

performance

(up

to

40

ft

from

the zBoost

unit).

Nem

QUESTIONS?

Visit

www.Wi-Ex.com

Ema il

CustomerSu

[e-mail]

Or

call

1-800-871-L6L2

,wwfld|

E

rfi

u

T

www.wpsantennas.com

1-877-594-5766

[e-mail]

www.wpsantennas.com

1-877-594-5766

[e-mail]

EBQQST-OIUE

YX4[Q&P

FOR

SPRINT

AND

METRO-PCS

Set-up

Guide

The zBoost-ONETM

cell

phone

signal

booster

extends

a Cell Zone*

for t

-

4

phones/devices

on

the same PCS

carrier

(either

Sprint

or

MetropC5)

in homes

or offices.

zBoost-ONE

will boost

signal

up to

1200 sq

ft or up to

40 ft from

the zBoost

unit.

There

are two

steps for

setuP:

FIRST:

Sync

zBoost-ONE

to

your

carrier

network

(either

Sprint

or MetroPCS)

- NOTE:

This step

only needs

to be

performed

once

at the

beginning

of

your

set-up

1.

Place the

zBoost-oNE

unit on

a window

sill or

location

of strongest

signal.

2. Connect

the zBoost

unit

to the

provided

power

supply

and

plug

into

a

power

outlet.

3.

The

Svnc!-ink

Button

willflash

red.

4. Make

a call

with

your

device.

lf

using a

wireless

data card,

make

a connection using

the software

on

your

computer.

5. Press

the Svn.clink

Button.

6.

The

Svnq-L"m3

F".UI!.pn

will

blink

green

and

the

Slndset

hdjSatef

will turn on.
NOTE:

lf

this

does not

happen,

then the

sync

has

failed.

Disconnect

the

power

from the

wall outlet

and

repeat

steps.

SECOND:

find the

best

position

for

the

zBoost-ONE

L,

2.

The

Signal

Streneth

lndicator

reflects the

signal level

being received

by the

unit

at the

window.

Adjust

the angle

or

position

of the

zBoost-ONE unit

until

the strongest

possible

signal

is received

-

the

most bars.

3

or more

lit bars

will

provide

optimal

performance

(up

to

40

ft

from the

zBoost

unit).

Wem

qUESTIONS?

Visit

www.Wi-Ex.com

Ema i I

CustomerSu

[e-mail]

Or call L-800-871-L6L2

,ww';d.il

F

hy

wiffi

}(*

Signal

Strength

lndicator

Ha

ndset

lndicator

SyncLi

n k

Button

SPECIFICATIONS;

zBoost

ON E YX40 A

-P

Protects the

operator's network

using

patent-pending

tech

nologies

FCC

ID

SO4YX400-PCS

IC: 5544A-VX400PCS

This device

complies with

Part

L5 of

the FCC

Rules.

Operation is

subject

to the

following

two conditions:

(1)

This

device may not cause harmful

interference, and

(21

This

device must accept any interference

received,

including

interference

that may cause

undesired

operation.

zBoost

products

are manufactured

& distributed by Wi-Ex.

@ 2009. All rights reserved.

Sprint

and MetroPCS are registered trademarks

of

their

respective

owners.

Manufacturer warranty for the YX400-P is 1

year.

Register

your

product

at

www.Wi-Ex.com

Frequency

Uplink

Downlink

1850-1910MH2

1930-1990MH2

Networks

CDMA, lxrtt, EVDO

Power

Supply

90-264

VAC,

50-60H2

Base

Unit Weight

L.2

lbs

Base Unit Size

10"x9"x3.5"(wxhxd)

Coverage

fopen

area)

Up

to 1200

sq ft

or 40

ft

from

the

unit

System Gain

Average

45 dB

www.wpsantennas.com

1-877-594-5766

[e-mail]

www.wpsantennas.com

1-877-594-5766

[e-mail]