![](/html/9a/9a1e/9a1e508337c627f250fc8aa16a1955c582b1f79945b2051d4e90fc49fd5859d3/bg1.png)
zBoost zForce® YX240
User Guide
zBoost products have a 30-day money back guarantee when purchased directly from Wi-Ex®. If
product is purchased from a reseller or third party, the purchaser is subject to the policies of the
third party.
1 Year Manufacturer Warranty. Register your zBoost® product at www.Wi-Ex.com
v.1.12
![](/html/9a/9a1e/9a1e508337c627f250fc8aa16a1955c582b1f79945b2051d4e90fc49fd5859d3/bg2.png)
zBOOST® zFORCE YX240 USER GUIDE zBOOST® zFORCE YX240 USER GUIDE
About zBoost® from Wi-Ex®
Wi-Ex® is the leader in cell phone signal boosters. zBoost® enhances the performance of your cell
phone, PDA and wireless data card.
Compatibility – Dual Band zBoosts are compatible with 800MHz and 1900MHz regardless of
technology- including CDMA and GSM.
1-year manufacturer warranty – register your product at www.Wi-Ex.com.
zBoost® products have more awards, more sales and more locations than all other signal boosters
…COMBINED.
FCC Information
FCC ID: SO4YX240-PCS-CEL
Warning: Changes or modications to this device not expressly approved by Wi-Ex could void the user’s
authority to operate the equipment. Note: is equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits are designed to
provide reasonable protection against harmful interference in a residential installation. is equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If the equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
is equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
is transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
In accordance with FCC requirements of human exposure to radio frequency elds, the radiating element
(antenna) shall be installed such that a minimum separation distance of 20cm (8in) is maintained from all
persons.
Industry Canada Regulations
Canada IC: 5544A-YX240PCSCEL
is Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
e term “IC:” before the radio certication number only signies that Industry Canada technical
specications were met.
RF Exposure:
e manufacturer’s rated output power of this equipment is for single carrier operation. For situations when
multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the
output is re-radiated and can cause interference to adjacent band users. is power reduction is to be by
means of input power or gain reduction and not by an attenuator at the output of the device.
Please note: is unit has been approved for use in Canada under RSS 131, however, consent for the use of
this device to improve cellular or PCS coverage, must be obtained through your cellular or PCS provider,
prior to placing the unit in operation. Please refer to the Industry Canada document CPC 2-1-05, Section
i
![](/html/9a/9a1e/9a1e508337c627f250fc8aa16a1955c582b1f79945b2051d4e90fc49fd5859d3/bg3.png)
zBOOST® zFORCE YX240 USER GUIDE
6.1 available or viewable at: http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf08942e.html
Cet appareillage numérique de la classe [B] répond à toutes les exigences de l’interférence canadienne
causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif
peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue,
y compris l’interférence qui peut causer l’opération peu désirée.
Le fabricant nominale de la puissance de sortie de ce matériel est simple transporteur. Pour les situations
lorsque plusieurs signaux porteurs sont présents, l’évaluation devrait être réduite de 3.5 dB, en particulier
lorsque le signal de sortie est ré-émise et peut provoquer des interférences adjacentes à la bande utilisateurs.
Ce pouvoir est de la réduction par le biais de la sortie d’alimentation ou la réduction de gain et non par un
atténuateur à la sortie du dispositif.
zBOOST® zFORCE YX240 USER GUIDE
Package Contents: zBoost® zForce YX240
Before you begin, make sure all of the following parts came with your zBoost® YX240.
Literature Contents:
① Set-up overview for zBoost® zForce YX240
(User Guide online only)
Safety and Product Warranty Information
Copyright Notice
is manual is copyrighted. All rights reserved. is manual, whole or in part, may not be copied,
photocopied, reproduced, translated or reduced to any electronic medium or machine readable form for
distribution. is manual whole or in part, may not be modied without prior consent, in writing, from
Wireless Extenders.
Copyright © 2012 by Wireless Extenders, Inc.
Trademarks
Wireless Extenders, Wi-Ex, the Wi-Ex logo, zBoost, the zBoost logo and Extending Cell Zones are registered
trademarks of Wireless Extenders, Inc.
Safety Guidelines
In accordance with FCC requirements of human exposure to radiofrequency elds, the radiating element
(antenna) shall be positioned such that a minimum separation distance of 8 inches (20cm) is maintained
between the radiating element and the user and/or general population.
Limited Liability
In no event sha ll Wireless Extenders be l iable for a ny direct, indirect, specia l, punitive, incident al,
exempla ry or consequential damage s, or any d amages, whether in an action under contract, negligence,
or any other theor y, arising out of or in connection with the set up of, use of, inabi lit y to use, or
performance of the information, services, products, and materials available from this ma nua l. ese
limitations shall apply notwithstanding any failure of essential purpose of any limited remedy. Because
some jurisdictions do not allow limitations on how long an implied warranty last, or the exclusion or
limitation of liability for consequentia l or incidenta l damages, the above limitations may not apply to you.
For f ull warranty guidelines, see pa ge 8.
Product Contents:
② zForce Amplifier Cradle and Mounting Adhesive
③ Exterior Magnetic Mount Antenna with 10 ft Cable
④ 12v DC Cigarette Power Adapter with 3 ft Cable - OR -
⑤ Gooseneck Adapter (optional)
Warning
Changes or modications not expressly approved by
Wi-Ex® could void the user’s authority to operate this
equipment and/or void the product warranty.
ii
iii