Page 1
1
/ B5210
ZAVIO Indoor Box Camera
Quick Installation Guide
Page 2
2
Quick Installation Guide
Please follow the installation steps below to set up your IP camera.
Check the package contents with the list below. See P.2
Physical overview. See P.3
I/O Terminal Block Circuit. See P.4
I/O Terminal Block Pin Definition. See P.4
LED Indicator Definition. See P.4
Installation of hardware and connection of all cables. See P.5
Windows: Go to Zavio website and download Camera Installation Tool. See P.7
Access the IP Camera using Camera Installation Tool. See P.7
MAC OS: using Safari Browser. See P.10
Lighting environment. S ee P.12
Change language of the web interface. See P.12
Application of IP Camera. See P.13
Package contents
Camera IP camera
Quick Installation Guide Brief product information and quick installation
Accessory Hex screw driver
C-mount to CS mount adapter
Software
The following software and information are available online:
- Video Management Software
- Camera Installation Tool
- User manuals
- Camera Language Packs
Download the above at http://www.zavio.com/downloads.php or scan QR-Code.
To activate Video Management Software, please enter the license key below.
Page 3
3
Physical overview
－ Side －
－ Front －
－ Rear －
Reset:
When the device is powered, press the reset button to reboot the device, or hold the
reset button for 5 seconds to restore to factore settings.
DC Iris connector
Image sensor
Lens connector
Page 4
4
I/O Terminal Block Circuit
I/O Terminal Block Pin Definition
PIN Definition Description Max. V/A
Out + Alarm Out +
Relay contact output.
0.3A at 125V AC
or 1A at 30V DC
In + Alarm In +
Connected to GND to activate, or leave
floating (or unconnected) to deactivate.
5V DC / 50mA
LED Indicator
LED Color Indication
Network
Green Solid green when network is established.
Orange Blink orange when there is network activity.
Page 5
5
Install the hardware and connect all cables
A. Mounting the lens to the camera
a) Mount the lens by turning it clockwise on the camera until it stops.
b) Unscrew the focus controller to adjust to the desired focus.
c) Tighten the focus controller when finished.
B. Wall and Ceiling mounting
a) Fix the base plate to a flat surface with the three supplied screws.
b) Loosen the lock ring to adjust the desired angle of the camera.
c) Tighten the lock ring.
Page 6
6
C. Connect all cables
C1. Without Power over Ethernet (PoE) connection
1. Connect the power adaptor to the IP Camera.
2. Use a standard RJ-45 network cable and connect the IP Camera to a
hub/switch/router.
C2. Power over Ethernet (PoE)
1. Use a standard RJ-45 network cable and connect the IP Camera to a PoE-enabled
hub/switch/router.
C3. Wireless connection
1. Connect the power adaptor to the IP camera.
2. Insert Wi-Fi Dongle.
3. Connect to Wi-Fi.
Page 7
7
Windows: Go to Zavio Website and download Camera Installation Tool
Please go http://www.zavio.com/softwaredownloads.php download “Camera
Installation Tool”. And follow the installation process to complete the installation.
Access the IP Camera using Camera Installation Tool
1. Please check two settings before using Camera Installation Tool.
a. Browser’s Internet Properties → Security→ Default Level
Page 8
8
b. Browser’s Internet Properties → Privacy → Uncheck Pop-up Blocker
2. Click the Camera Installation T ool Icon on your desktop. The main page will show
up listing all active camera and video server devices. Select the desired IP
cameras from the list and click Link to IE.
Page 9
9
3. Enter Username and Password to login to the IP Camera.
(Default is admin / admin)
4. When accessing the IP Camera for the first time, a yellow information bar appears
below the address bar: This website wants to install the following add-on:
AxvideoView.cab from ‘Zavio Inc’.
5. Click the information bar, and select Install ActiveX contr ol.
Page 10
10
6. Click Install
7. Live video will display in the center of your web browser.
MAC OS using Safari Browser
1. Select Safari Icon
Page 11
11
2. Click Bonjour function and select the camera you wish to access.
3. Enter name and password to login to the IP camera.
(Default is admin / admin)
4. Live video will display in the center of your web browser.
Page 12
12
Lighting environment setting
Default setting for lighting environment is Auto. You may change exposure frequency to
50 or 60 Hz at Setting > Live View > Camera Setting > Image Setting.
Change the Web Interface into your preferred language
Before accessing the Setting page to change the language of the web interface, you
must download the language pack.
1. Go to http://www.zavio.com/downloads.php and download the language pack
corresponding to your IP camera model.
2. Go to the IP camera setting page and upload the preferred language from the
language pack downloaded from step 1.
Setting > System > Maintenance > Language > Upload
3. Once the upload is complete, the browser will automatically change the language.
Page 13
13
Application of IP Camera
Page 14
14
Memo
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………..
Loading...