Zanussi ZYB992 User Manual

EN

User manual

Oven

ZYB992

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Clock functions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Automatic programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Using the accessories _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10

Safety information

Before the installation and use, read this manual carefully:

• For your personal safety and the safety of your property

• For the respect of the environment

• For the correct operation of the appliance.
Always keep these instructions with the appliance also if
you move or sell it.
The manufacturer is not responsible if incorrect installa­tion or use results in damage.

Children and vulnerable people safety

• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in safe way
and understand the hazards involved. Children shall
not play with the appliance.

• Keep all packaging away from children. There is the
risk of suffocation or physical injury.

• Keep children and animals away from the appliance
when the door is open or the appliance is in operation.
There is the risk of injury or other permanent disability.

• If the appliance has Child Lock or Key Lock (Control
Lock) function, use it. It prevents children and animals
from accidental operation of the appliance.

General safety

• Do not change the specifications of this appliance.
There is the risk of injury and damage to the appliance.

• Do not let the appliance stay unattended during opera­tion.

• Switch off the appliance after each use.

Additional functions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19

Subject to change without notice

Installation

• Only an approved electrician can install and connect
the appliance. Contact an approved service centre. This
is to prevent the risks of structural damage or physical
injury.

• Make sure that the appliance is not damaged because
of transport. Do not connect a damaged appliance. If
necessary, contact the supplier.

• Remove all packaging, stickers and layers from the ap­pliance before first use. Do not remove the rating plate.
It can invalidate the guarantee.

• Fully obey the laws, ordinances, directives and stand­ards in force in the country where you use the appli­ance (safety regulations, recycling regulations, electri­cal or gas safety rules etc.).

• Make sure that the appliance is disconnected from the
power supply during the installation.

• Be careful when you move the appliance. The appliance
is heavy. Always use safety gloves. Do not pull the ap­pliance by the handle.

• The electrical installation must have an isolation device
which lets you disconnect the appliance from the
mains at all poles. The isolation device must have a
contact opening width of minimum 3 mm.

• You must have correct isolation devices: line protect­ing cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.

• The shock protection parts must be fixed in such a way
that they cannot be undone without tools.

• Some parts of the appliance carry current. Close the
appliance with furniture and make sure that there are
no free spaces. It prevents electrical shock because you
cannot accidentally touch dangerous parts.

2

• Before the installation, make sure that the kitchen cabi­net has the recess dimensions applicable.

• Make sure that the appliance is installed below and ad­jacent safe structures.

• Keep the minimum distances to the other appliances
and units.

• Install the appliance with its back and one side close to
the higher appliance. The other side must be close to
appliance with the same height.

• The appliance cannot be positioned on a base.

• Built in ovens and built in cooking surfaces are attach­ed with special connection system. To prevent damage
to the appliance, only use an appliance with the appli­ances from the same manufacturer.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical data on the rating plate
agree with your domestic power supply.

• Information on the voltage is on the rating plate.

• Always use a correctly installed shockproof socket.

• When you connect electrical appliances to mains sock­ets, do not let cables touch or come near the hot appli­ance door.

• Do not use multi-way plugs, connectors and extension
cables. There is the risk of fire.

• Do not replace or change the mains cable. Contact the
service centre.

• Make sure not to squash or cause damage to the mains
plug (if applicable) and cable behind the appliance.

• Make sure that the mains connection is accessible after
the installation.

• Do not pull the mains cable to disconnect the appli­ance. Always pull the mains plug – if applicable.

Use

• The appliance is only for domestic use. Do not use the
appliance for commercial and industrial use.

• Only use the appliance for domestic cooking tasks.
This is to prevent physical injury to persons or prevent
damage to property.

• Do not use the appliance as a work surface or storage
surface.

• Do not put flammable products or items that are wet
with flammable products, and/or fusible objects (made

of plastic or aluminium) in, near or on the appliance.
There is the risk of explosion or fire.

• The interior of the appliance becomes hot during use.
There is the risk of burns. Use gloves when you insert
or remove the accessories or pots.

• Be careful when you remove or install the accessories
to prevent damage to the oven enamel.

• Always stay away from the appliance when you open
the door while the appliance is in operation. Hot steam
can release. There is the risk of skin burns.

• Discoloration of the enamel has no effect on the per­formance of the appliance so it is not a defect in the
sense of the warranty law.

• To prevent damage or discoloration to the enamel:
– do not put any objects directly on the appliance

floor and do not cover it with aluminium foil;
– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance

after you finish the cooking.

• Do not use this appliance if it is in contact with water.
Do not operate the appliance with wet hands.

• Do not apply pressure on the open door.

• Always close the appliance door when you cook, even
while grilling.

Care and cleaning

• Before maintenance, switch off the appliance and dis­connect the appliance from the power supply.

• Before maintenance, make sure that the appliance is
cold. There is the risk of burns. There is the risk that
the glass panels can break.

• Keep the appliance clean at all times. A build-up of fats
or other foodstuff can result in a fire.

• Regular cleaning prevents the surface material from de­teriorating

• Use a deep baking tray for very moist cakes to prevent
that fruit juices cause stains that can be permanent.

• For your personal safety and the safety of your proper­ty, only clean the appliance with water and a soap. Do
not use flammable products or products that can cause
corrosion.

• Do not clean the appliance with steam cleaners, high­pressure cleaners, sharp objects, abrasive cleaning
agents, abrasive sponges and stain removers

• If you use an oven spray, follow the instructions from
the manufacturer.

3

• Do not clean the glass door with abrasive cleaning
agents or metal scraper. Heat resistant surface of the
inner glass can break and shatter.

• When the door glass panels are damaged they become
weak and can break. You must replace them. Contact
the service centre.

• Be careful when you remove the door from the appli­ance. The door is heavy!

• Do not clean catalytic enamel (if applicable).

Pyrolytic cleaning

• Do not leave the appliance unattended during Pyrolytic
cleaning.

• Do not try to open the door and do not cut the power
supply during Pyrolytic cleaning.

• Keep children away during pyrolytic cleaning. The ap­pliance becomes very hot. There is the risk of burns.

• During pyrolytic cleaning, stubborn dirt can cause dis­coloration to the enamel. Discoloration to the enamel
has no effect on the performance of the appliance

Risk of fire

• Open the door carefully. The use of ingredients with al­cohol can cause a mixture of alcohol and air. There is
the risk of fire.

• Do not let sparks or open flames come near the appli­ance when you open the door.

• Do not put flammable products or items that are wet
with flammable products, and/or fusible objects (made
of plastic or aluminium) in, near or on the appliance.

Oven lamp

• Bulb lamps used in this appliance are special lamps
selected for household appliances use only. They can­not be used for the full or partial illumination of a
household room.

• If it becomes necessary to replace the lamp use one of
the same power and specifically designed for house­hold appliances only.

• Disconnect the appliance from the power supply before
the replacement of the oven lamp. There is the risk of
electrical shock.

Service centre

• Only an approved engineer can repair or work on the
appliance. Contact an approved service centre.

• Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or damage
– Disconnect the appliance from the power supply.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents children or

small animals from being closed inside of the appli­ance. There is the risk of suffocation.

4

Product description

General overview

1

6

7

1 Control panel
2 Electronic programmer

2

3 Ventilation openings

3

4 Grill

4

5 Oven lamp

5

6 Fan
7 Rating plate

Oven accessories

• Wire shelf
For cookware, cake tins, roasts.

• Flat baking tray

Before first use

Warning! Refer to "Safety information" chapter.

Initial Cleaning

• Remove all parts from the appliance.

• Clean the appliance before first use.

Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and

Cleaning".

Setting and changing the time

Set the time first to operate the oven.

When you connect the oven to the electrical supply, or af­ter a power cut, the symbols

and flash.

For cakes and biscuits.

• Deep roasting pan
To bake and roast or as pan to collect fat.

12

Set the correct time with or .

Changing the time

1.

Touch
es.

2.

Set the correct time with
The clock shows the time and the flashing stops after ap­proximately 5 seconds.

again and again until the symbol flash-

or .

Setting the language

1.

Deactivate the appliance with

.

5

2.

Touch
2 seconds. The display shows the current language
selection.

3.

Set the language with

4.

Touch

2 seconds to confirm.
Do each step in approximately 5 seconds. If you do not
change the setting in approximately 5 seconds, data will
not be saved.

and at the same time for approximately

.

and at the same time for approximately

Pre-heating

1.

Set function

2. Let the appliance operate without the food for approx-

imately 1 hour.

and maximum temperature.

Daily use

Warning! Refer to "Safety information" chapter.

The display

1 2 3 45 5

3.

Set function

4. Let the appliance operate without the food for approx­imately 10 minutes.

5.

Set function

6. Let the appliance operate without the food for approx­imately 10 minutes.

This is to burn off the residue in the appliance. The acces­sories can become more hot than usually. When you pre­heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.

and maximum temperature.

and maximum temperature.

1 Oven function symbol
2 Time, Oven function name
3 Temperature

Sensor Field Function Description

ON/OFF To activate or deactivate the appliance.

SELECTOR To set an oven function.

AUTOMATIC PROGRAMMES To set an automatic programme.

RAPID HEAT UP To decrease the heat up time.

PYROLYTIC CLEANING To start the Pyrolytic cleaning.

/

6

PLUS, MINUS To adjust the temperature or time.

CLOCK To set a clock function.

4 Heat indicator
5 Clock function indicators