Zanussi ZT 51 2 R User Manual

REFRIGERATOR
ZT 51/2 R
2222611-87
INSTRUCTION BOOKLET
2
Instructions for the user Important Safety Instructions 3
Before use 5 Setting the temperature 5 The - star compartment 5 Frozen food storage 5 Thawing 6 Making ice cubes 6 Normal operating sounds 6 Fresh food refrigeration 6
Health and safety guidelines 7
Defrosting 8 Maintenance and Cleaning 9
Internal cleaning 9 External cleaning 9 Changing the light bulb 9 When the appliance is not use 9
Something not Working? 10 Service and Spare Parts 11 Customer Care Department 11
Guarantee Conditions 12
Instructions for the installer Technical specifications 13 Installation 13
Positioning 13 Door reversal 14
Electrical Connection 15
Contents
Important Safety Instructions
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement.
Prior to Installation
Check the appliance for transport damage. Under
no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer.
Installation
This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable. Important: If the supply cable is damaged, it must be replaced by a special cord or assembly avail­able from the manufacturer or its service agent.
Any electrical work required to install this appli-
ance should be carried out by a qualified electri­cian or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow the refrigerant to settle.
Refrigerant
During transportation and installation of the appli-
ance, be certain that none of the components of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
thoroughly ventilate the room in which the appli­ance is situated.
Child Safety
Do not allow children to tamper with the controls
or play with the product.
There is a risk of suffocation! Keep packaging
material away from children!
During Use
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs only. It is not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any con­tainers with flammable materials, such as spray cans, fire extinguisher refill cartridges etc. in the refrigerator.
Frozen food should not be refrozen once it has
thawed out.
Do not place carbonated or fizzy drinks in the
freezer compartment.
Ice lollies can cause ‘frost/freezer burns’ if con-
sumed straight from the
-
star compartment.
Do not remove items from the freezer compart-
ment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
Bottles and cans must not be placed in the freez-
er compartment they can burst when the con­tents freeze.
Manufacturers’ recommended storage times
should be adhered to. Refer to relevant instruc­tions.
Maintenance and Cleaning
Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
This product should be serviced by an authorised
engineer and only genuine spare parts should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Force Centre.
At the end of the Appliance Life
When disposing of your appliance use an autho-
rised disposal site.
Remove the plug and ensure that any locks or
catches are removed, to prevent young children being trapped inside.
3
1
2
3
5
6
4
A - Dairy compartment B - Can storage shelf with egg tray C - Bottle storage shelf D - Salad drawer E - Glass shelf
G - Storage shelves H - Conveyor K - Freezer compartment L - Thermostat control
Description of the Appliance
4
A
C
K
E
B
G
L
D
H
5
Operation
Before use
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter­gent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator and the
-star compartment is regulated by a thermostat with 6 temperature positions and one «OFF» (O) posi­tion.
Position 1 = minimum coldness Position 6 = maximum coldness
Turn the thermostat dial to the required position; the
intermediate position is usually the most suitable (3-4).
The required thermostat setting can be varied as the temperature inside the refrigeration compartment depends on the following factors:
- room temperature
- how often the door is opened
- how much food is stored
- position of the appliance
Important
The temperature inside the refrigerator and
-star compartment can be regulated by
adjusting the conveyor located under the
- star compartment.
To obtain a lower temperature in the ­star compartment when frozen food is stored inside and when the ambient temperature is 25°C or lower slightly raise the conveyor (A) and push it all the way in. When frozen food is not stored in the -star compartment and when the ambient temperature is higher than 25°C return the conveyor to its initial position. This reduces the temperature in the refrigerator compartment.
The -star compartment
This compartment is suitable for the storage of com­mercially frozen food and for ice cube making.
Frozen food storage
Storing ready-frozen foods is quite straightfor­ward. The packs can be placed beside each other or on top of each other. You are strongly advised to place ready-frozen food in the compartment as quickly as possible after purchase. Also ensure that the external packaging is intact. Packaging which is swollen or has traces of refrozen water droplets on the pack could indi­cate that the product has not been kept at a suit­able temperature and that it may have lost its original quality. Partially thawed food must not be refrozen, it must be consumed within 24 hours. Never exceed the storage times indicated. Do not open the -star compartment door too often and do not leave open longer than nec­essary.
Important
In the event of a power cut the food in the -star compartment will not be affected if the power cut is short and if the compartment is full. Do not open the door. Should the food begin to thaw, it must be consumed quickly and must not be refrozen.
D182
A
**
Thawing
Food can be thawed in a number of ways, depend­ing on the type of food and the size of the packs. Meat, fish and fruit should be thawed in the refriger­ation compartment and small pieces of meat can even be cooked while still frozen, but you must ensure that it is thoroughly cooked through. Vegetables should be directly immersed in boiling water; ready-cooked dishes can be placed directly in the oven in their aluminium wrapping. A microwave oven is particularly suitable for thawing any type of frozen or deep-frozen food: follow the oven instructions, particularly regarding the place­ment of aluminium wrapping in the oven.
Making ice cubes
The appliance is provided with a plastic ice cube tray. Fill the tray 3/4 full to allow the ice to expand and place it in the -star compartment. To turn out the ice cubes simply give the tray a slight twist to release the cubes.
Important
Do not consume ice-lollies which have just come out of the -star compartment. Their extremely low temperature can cause frost burns. Do not remove items from the
-star compartment if your hands are damp/wet, as this could cause skin abra sions or "frost/freezer burns".
Normal operating sounds
You may hear faint gurgling or bubbling sounds when the refrigerant is pumped through the coils or tubing at the rear and the cooling evaporator.
When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise from the compressor.
A thermostat controls the compressor, and you will hear a faint ‘click’ when the thermostat cuts in and out.
Fresh food refrigeration
To obtain the best performance, do not store warm food or evaporating liquids in the refrigera­tor; do cover or wrap the food, particularly if it has a strong flavour. Do not cover the shelves with any protective material, such as paper, cardboard or plastic, which may obstruct the air circulation through them. To help you use your refrigerator correctly, here are some more useful hints: Raw meat (beef, pork, lamb & wild fowl): wrap in polythene bags and place on the first shelf under the -star compartment.
Meat can only be stored safely in this way for one or two days at the most.
Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom salad crisper. Butter & cheese: these should be placed in spe­cial airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door.
The walls of the refrigerator are equipped with runners so that shelves can be positioned as desired.
D040
6
Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever.
The following tips should help you to ensure that the food in your home is in as perfect condition as possible.
Keep the time between buying chilled food and placing it in your fridge as short as possible. Tests showed that the temperature of 1 litre of orange juice rose to 22°C in an hour between the super­market and home. It then took 11 hours to get down to 7°C in the refrigerator.
Keep the refrigerator door closed as much as pos­sible.
Do not push food together too much, try to allow air to circulate around each item.
Cool cooked food as quickly as possible but do NOT place in the refrigerator until cool. (Leave food in a cool place in order that it can then be placed in the refrigerator as soon as possible).
Do NOT mix raw and cooked meat, they must be in separate containers. Take care not to let the meat juices drip onto other food. If the meat does drip, remove everything and clean thoroughly.
Do not store food uncovered.
Remove suspect food from your refrigerator and clean (Refer to “Maintenance and cleaning”).
Never allow spillages to dry and harden.
Store eggs in the egg rack provided in the refrigerator door. Discard any broken or chipped eggs.
Regularly check the refrigerator door seal to ensure that it is clean and free from debris.
Always wash your hands with soapy water and dry them with a clean towel before handling food.
Keep work surfaces clean and avoid cross contamination by not using the same work sur­face or knife, without washing them thoroughly in between.
Health and Safety Guidelines
7
While in operation the -star compartment becomes progressively covered with frost. This frost, which acts as an insulator and thus pre­vents the cold from reaching the food should be removed whenever the thickness of the frost exceeds 1/4".
To carry out complete defrosting proceed as follows:
1. Push the conveyor completely in.
2. Place a tray on the upper shelf of the refrigerator
under the drain hole of the conveyor.
3. Remove any food from inside the -star com- partment, wrap it in several sheets of newspaper and store in a cool dry place.
4. Push the button at the centre of the thermostat knob. To accelerate defrosting, place a bowl of hot water inside the compartment (with a piece of cardboard underneath the bowl as protection).
5. When defrosting is completed, dry thoroughly and remove the water collected in the tray. The refrigerator starts operating automatically fol­lowing defrosting.
After letting the appliance run for at least half an hour, replace the previously removed food into the
-star compartment. When defrosting it is not necessary to remove the foods from the inner door and the refrigerator com­partment.
Important
A temperature rise of the frozen food packs during defrosting may shorten their storage life.
Never use sharp metal tools to scrape off frost from the evaporator as you could dam age it beyond repair.
Defrosting
8
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC­TRICITY supply.
Internal cleaning
Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly.
NEVER USE DETERGENTS, ABRASIVE POW­DERS, HIGHLY PERFUMED CLEANING PROD­UCTS OR WAX POLISHES, TO CLEAN THE INTE­RIOR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG SMELL.
External cleaning
Wash the outer cabinet with warm soapy water. Do NOT use abrasive products.
Once or twice a year dust the condenser (black grill) and the compressor at the back of the appliance, with a brush or vacuum cleaner, see figure.
You MUST ensure that the appliance is switched OFF. An accumulation of dust will affect the perfor­mance of the appliance and cause excessive elec­tricity consumption.
Changing the light bulb
Should the interior light fail to work, switch off and disconnect the appliance from the electricity supply. Replace the bulb as follows:
1. Remove conveyor
2. Unscrew light bulb
3. Replace with a 12 watt bulb available from your
nearest Zanussi Service Force Centre.
4. Replace conveyor
D358
CONDENSER
COMPRESSOR
When the appliance is not in use
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the appliance, leaving the door ajar to prevent unpleasant smells.
D359
Maintenance and Cleaning
9
Something not Working?
Important:If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation a charge will be made, even if the appliance is under guarantee. Beforecontacting your local Service Force Centre check the following points.
Symptom Solution
No power to appliance
The light does not come on
The temperature in the fridge or freezer section is too high
The compressor runs continuously
- Check there is power at the socket.
- Check there is not a power cut by checking the household lights.
- Check the fuse has not blown.
- Ensure that the bulb is correctly fitted.
- Replace the bulb if it has blown.
- Check the door light switch is not jammed.
- Check the thermostat in the fridge is turned to the
correct setting relative to ambient conditions.
- Check the ambient temperature is within the appliances
operating limits of 10˚C to 32˚C. Relocate the appliance if necessary.
- Adjust the thermostat to give correct temperature
control. See page 5.
- Check that the door is closed.
- Large quantities of food have recently been placed in
the cabinet/and or door is frequently opened.
- Check that air ventilation is not obstructed.
Excessive frost and ice has built up
Noise
- Ensure the door is not left open.
- Check that nothing is preventing the door from closing.
- Is the door gasket intact and clean.
- Has advised periodic defrosting been carried out.
- Refer to normal operating sounds.
If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee service calls.
10
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning:
08705 929929
Your call will be routed to the Service Force Centre covering your post code area. The address of your local Service Force Centre is detailed in the accompanying Customer Care Book.
Before calling out an engineer, please ensure you have read the details under the heading ‘Something Not Working?’
When you contact the Service Centre you will need to give the following details.
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
(found on the rating plate)
4. The model serial no. of the appliance (found on the rating plate)
5. The purchase date
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, you are invited to contact our Customer Care Department by letter or telephone as follows:
Customer Care Department Zanussi 55-77 High Street Slough Berkshire SL1 1DZ
Tel: 08705 727727
11
Standard guarantee conditions
We, Zanussi Limited, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufactur-
er's instructions.
The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authorised by us.
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
Any appliance or defective part replaced shall become the Company's property.
This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
Products of Zanussi manufacture which are not marketed by Zanussi Limited.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:
The guarantee starts from the date you first purchased your product.
The guarantee is for the same period and to the same extent for labour and parts as exists in the new
country of use for this brand or range of products.
This guarantee relates to you and cannot be transferred to another user.
Your new home is within European Community (EC) or European Free Trade Area.
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliance.
France Senlis +33 (0) 44 62 29 99 Germany Nurenberg +49 (0) 911 323 2600 Italy Pordenone +39 (0) 1678 47053 Sweden Stockholm +46 (0) 8 738 79 50 UKSlough+44 (0) 1753 219897
Guarantee Conditions
12
DIMENSIONS Height 85 cm
Width 49,5 cm Depth 60 cm
POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOT ALPOWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY 0,74 kWh
GROSS CAPACITY Fridge/Freezer 140 l NET CAPACITY Fridge/Freezer 118 l STAR RATING
Technical specifications
Installation
13
Positioning
For this appliance to work efficiently, it should be located away from heat sources, e.g. cookers, radia­tors, boilers, direct sunlight etc. This also includes locations or rooms where the ambient temperature reaches above 32 degrees C or drops below 10 degrees (e.g. conservatories). You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be a minimum distance beween the top of the cabinet and any overhanging kitchen furniture as shown in the figure. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.
Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers.
D200
100 mm10 mm
10 mm
A
B
NP006
14
Door reversal
Before carrying out the operations described below, pull out the mains plug from the wall socket. To carry out this reversal go through the following steps:
1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
2. Remove the bottom door hinge (5).
3. Remove the door (4) by opening it and pulling it
gently downwards to remove it from the top hinge pin (2).
4. Unscrew the top hinge pin (2) from the top hinge (1) and replace it in the opposite hole on the left hand side.
5. Unscrew the foot at the base (6) of the appliance and refit it on the opposite side.
6. Refit the door and the bottom hinge to the left hand side.
When the bottom hinge is screwed in, a certain amount of force is exerted on the screws. It is therefore advisable to lubricate the screw tips before starting this operation.
Important
After completion of the door reversal opera­tion, verify that the door gasket is sealing onto the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fit­ting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier on a low setting.
15
Electrical Connection
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any inability should this safety measure not be observed.
If the plug that is fitted to your appliance is not suit­able for your socket outlet, it must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug. The cut off plug should then be disposed of to pre­vent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow - Earth Blue - Neutral Brown - Live
If you fit your own plug, the colours of the wires in the mains lead of your appliance, may not corre­spond with the markings identifying the terminals in your plug, proceed as follows:
Connect the Green and the Yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol , or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter «N» or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the letter «L» or coloured red.
The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BS1362 fuse. Only ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug. A replacement cover/carrier must be obtained from your local Zanussi Service Force Centre whose address is listed in the Customer Care Booklet which accompanies your instruction manual.
This appliance complies with the E.E.C. Directive No. 87/308 of 2.6.87 relative to radio interference suppression.
This appliance complies with the following E.E.C. Directive:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent amendments.
- 89/336 EEC of 3.5.89 (Electromagnetic
- Compatibility Directive) and subsequent amendments.
Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of breakdown.
D207
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13 AMP
Loading...