Zanussi ZSA 15 User Manual

35662-6802

OPERATING AND INSTALLATION MANUAL

ZANUSSI

BUILT-IN OVEN

MODEL

ZSA 15

2

WARNINGS AND GUIDANCE

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred, always ensure that the book is left with
the appliance in order that the new owner can get to know the functions of the appliance and
the relevant warnings.

These warnings are provided in the interest of safety. You MUST read them carefully before
installing or using the appliance.

This oven is heavy and care must be taken when
moving it.

Ensure that all packaging, both inside and outside the
oven, has been removed before the oven is used.

The oven must be installed according to the
instructions supplied. Any electrical work must be
undertaken by a qualified electrician/competent
person.

It is dangerous to alter the specifications in any way.
After installation, please dispose of the packaging with

due regard to safety and the environment.

During Operation

Do not use this oven if it is in contact with water and

never operate it with wet hands.
Ensure that the anti-tip oven shelves are installed in

the correct way (see instructions).
This oven is designed to be operated by adults and

children under supervision. Young children must not
be allowed to tamper with the controls or play near or
with the oven.

CAUTION - accessible parts, especially around the
grill area, may become hot when the oven is in use.
Children should be kept away until it has cooled.

Take great care when heating fats and oils as they
will ignite if they become too hot.

This oven has been designed for cooking edible
foodstuffs only and must not be used for any other
purposes.

Never place plastic or any other material which may
melt in or on the oven.

Only clean this oven in accordance with the
instructions.

Take care to follow the recommendations given for
tending the food when grilling. Use the handle
provided in the recommended way.

Always grill with the oven door closed.
Always remove the grill pan handle when grilling.
Always use oven gloves to remove and replace food

in the oven. Similarly always use oven gloves to
remove and replace the grill pan handle, before and
after grilling.

Ensure that you support the grill pan when removing it
from the oven.

Never line any part of the oven with aluminium foil. Do
not allow heatproof cooking material, e.g. roasting
bags, to come into contact with oven elements.

Always stand back from the oven when opening the
oven door, to allow any build-up of steam or heat to
release.

Stand clear when opening the drop down oven door.
Do not allow it to fall open - support it using the door
handle, until it is fully open.

Do not place sealed cans or aerosols inside the oven.
They may explode if they are heated.

Do not hang towels or clothes from the oven or its
handle. They are a safety hazard.

After Use

Ensure that all control knobs are in the OFF position
when not in use.

For hygiene and safety reasons, this oven should be
kept clean at all times. A build-up of fats or other
foodstuffs could result in a fire, especially in the grill
pan.

Always allow the cooling fan to cool the cooker down
before switching off at the electrical supply prior to
carrying out any cleaning or maintenance work.

Do not leave utensils containing foodstuffs, e.g. fat or
oil in or on the oven in case it is inadvertently switched
ON.

Ovens and hobs become very hot, and retain their
heat for a long period of time after use. Children
should be kept well away from the cooker until it has
cooled.

Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Refer to your local Zanussi Service
Centre. Always insist on genuine Zanussi spare parts.

Your safety is of paramount importance.
Therefore, if you are unsure about any of the

meanings of these WARNINGS, contact the
Customer Care Department

Customer Care Department
Telephone: [phone]

3

CONTENTS

Warnings and Guidance Page 3
Technical Data Page 5
Installation Page 6
Electrical Connections Page 7
When the oven is first installed Page 8
Use and Care Page 9
How to set the clock and timer Page 10
Controls Page 11
Using the fan oven Page 12-13
Oven cooking chart Page 14
Grilling Page 15
Helpful hints when buying and preparing food Page 16
Cleaning the oven Page 17
Cleaning the Hinged Grill Page 18
What Happens if something goes wrong Page 18
Peace of mind for 24 Months Page 19

This appliance complies with the following E.E.C. Directives:
* 73/23 - 90/683 (Low Voltage Directive);

* 93/68 (General Directives);
* 89/336 (Electromagnetical Compatibility Directive)

and subsequent modifications.

MANUFACTURER: ELECTROLUX ZANUSSI ELETTRODOMESTICI S.p.A.

Viale Bologna 298
47100 FORLÌ (Italy)

WARNING

Please remember that an appliance used for cooking does
get hot, so make sure that children are kept well away while it is in use.

Please complete and return the 24 months Guarantee card.

In case of a complaint, and for ordering spare parts, you must specify the
model number and serial number which appear on the rating plate situated
on the cavity front panel.

4

TECHNICAL DATA

Model Number: ZSA 15W - ZSA 15B

Recess dimensions

Height 580 mm
Width 560-570 mm
Depth 550 mm
Oven Capacity 1.9 cu. ft.

Internal oven dimensions

Height 320 mm
Width 420 mm
Depth 390 mm

Oven Ratings

Oven Element 2.5 kW
Grill Element 1.8 kW
Convection Fan 30 W
Oven Light 15 W
Cooling fan 25 W
Total Rating 2.565 kW

Cable (for UK use)

Cable cross-section 6 mm
Type of cable 6242 Y
Fuse (min.) 15 amp

Cable (for Europe use)

Cable cross-section 2.5 mm
Type of cable Ho RR-F
Fuse (min.) 13 amp

2

2

5

INSTALLATION

It is mandatory that all operations required for the
installation be carried out by a qualified or
competent person - in accordance with existing
rules and regulations.

Please ensure that when the appliance is installed it
is easily accessible for the engineer in the event of a
breakdown.

BUILDING IN

It is important that the dimensions and materials of
the surround or cabinet into which the oven will be
built are correct and will withstand a temperature
increase of at least 60°C above ambient; and that
proper arrangements are made of a continuous
supply of air to the oven so it does not overheat.

Dimensions of the appliance and recess required
are given below (Fig. 1-2).

FO 0039

Fig. 3

Securing The Oven To The Cabinet

Fit the appliance into the cabinet recess, open the
oven door and secure the oven to the kitchen cabinet
with four wood screws, which fit the holes provided in
the oven frame (Fig. 3).

FO 0374

FO 0381

6

Fig. 1

Fig. 2

ELECTRICAL CONNECTION

We strongly recommend that all operations for the
installation of your oven be carried out by
QUALIFIED PERSONNEL to the relevant British
Standards.

The oven designed to be connected to 240V (50Hz)
electricity supply.
The oven has an easily accessible terminal block
which is marked as follows:

Letter L - Live terminal
Letter N - Neutral terminal

- Earth terminal

THIS APPLIANCE MUST BE EARTHED

The cable used to connect the oven to the electrical
supply should have the characteristics indicated in
the table.

It is necessary that you install a double pole switch
between the appliance and theelectricity supply
(mains), with a minimum gap of 3mm between the
switch contacts and of a type suitable for the
required load in compliance with the current rules.

The switch must not break the yellow and green
earth cable at any point.

Important

After installation and connecting, the cable must be
placed so that it cannot at any point reach a
temperature of more than 50°C above the ambient
temperature.

Before the appliance is connected, check that the
main fuse and the domestic installation can support
the load; and that the power supply is properly
earthed.

The manufacturer disclaims any responsibility should
these safety measures not be carried out.

This appliance meets the requirements laid down in
EEC Directive No. 89/336 relating to the suppression
of radio and TV interference.

For Uk use only

Models Rating Cable cross Fuse

section mm2 and

Type of the cable min.

ZSA15

2565 W 6 mm

2

6242 Y 15 A

For Europe use only

Models Rating Cable cross Fuse

section mm2 and

Type of the cable min.

ZSA15

2565 W 2,5 mm

Ho5 RR-F 13 A

2

7