Zanussi ZOU 852 User Manual
Built-in electric oven
«ОВНЩТИН¸Ъ ˆФ˝Ò̸Ú
ZOU 852
Instruction Booklet
œ‰Á„flÂÚ ˜ÒfiÛ¢Ú
English
Warnings - Built-in ovens
It is most important that the instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can be acquainted with the functioning of the appliance and the
relevant warnings. These warnings are provided in the interest of safety. You must read
them carefully before installing or using the appliance.
Installation
Any installation work must be undertaken
by a qualified electrician or competent
person.
Installation and initial adjustment of your
oven MUST be carried out by qualified
personnel in compliance with current
regulations. Specific installation
instructions for the installer are given in this
booklet.
During use
This appliance has been designed for
cooking edible foodstuffs only, and must
not be used for any other purposes.
Always stand back from the oven when
opening the oven door during cooking or
at the end of it to allow any build up of
steam or heat to release.
It is dangerous to alter the specifications
or modify the product in any way.
Appliances become very hot with use, and
retain their heat for a long period after use.
Care should be taken to avoid touching
heating elements inside the oven.
Always ensure that the control knobs are
in the “off” position when not in use.
For hygiene and safety reasons, this
appliance should be kept clean at all times.
A build-up of fats or foodstuffs could result
in a fire.
Never line any part of the oven with
aluminium foil.
Easy clean-liners (if provided) should never
be cleaned with any other than soapy water.
Never use steam or steam machines to
clean the appliance.
Before any maintenance or cleaning work
is carried out on the appliance, always turn
off the isolator switch at the cooker point,
and allow to cool.
Ensure that the shelves are put in place in
the correct way.
This appliance is meant to operate with a
single-phase or a three-phase connection
to 230V electrical supply, or to a doublephase with neutral wire or three phase with
neutral wire 400V electrical supply. A
polyphasic 400V connection without neutral
wire will cause the destruction of the oven
and the combined hob.
Child safety
This appliance is designed to be operated
by adults. Children should not be allowed
to tamper with the controls or play with the
product.
Children should be supervised at all times
and should not be allowed to touch the hot
surfaces or be in the vicinity when in use
or until the appliance has cooled after use.
During oven cooking and grilling, the
appliance door and the surrounding parts
are warmed up to a very high temperature.
Be careful and keep children away from
the appliance while you are using it. When
you connect other appliances to a plug near
the oven, check carefully that the wire does
not touch warm parts of the oven and does
not get taken in the oven door.
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
2
Technical assistance
This appliance should be serviced by an
authorized Network Service Centre, and
only genuine spare parts should be used.
Under no circumstances should you
attempt to repair the appliance yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Refer to your local Service
Centre. Always insist on genuine spare
parts.
Guide to Use the
instructions
Safety Instructions
Step by step instructions for an
operation
Hints and Tips
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product.
For more detailed information about recycling
of this product, please contact your local
city office, your household waste disposal
service or the shop where you purchased
the product.
When the oven is first installed
Once the oven has been installed:
1. Switch the oven function control knob to
conventional cooking ( )
2. Set the thermostat knob to “MAX”
3. Allow the oven to run empty for
approximately 45 minutes
4. Open a window for ventilation
During this time, an unpleasant odour may
be emitted. This is absolutely normal, and
is caused by residues of manufacturing.
Repeat this operation for the grill and fan
cooking function.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy
water.
Before cooking for the first time,
carefully wash the oven
accessories.
To open the oven door, always
catch the handle in its central
part.
3
Description of the appliance
723456
98
1
12
10
11
1. Control Panel
2. Front right hotplate/cooking zone control knob
3. Rear right hotplate/cooking zone control knob
4. Rear left hotplate/cooking zone control knob
5. Front left hotplate/cooking zone control knob
6. Thermostat control knob
7. Thermostat control light
4
8. Cooking function control knob
9. Operating control light
10. Grill
11. Oven lamp
12. Rating plate
Electric oven
Oven Function (Fig. 1) and
Thermostat (Fig. 2) control
knobs
They enable to select the most appropriate
type of heating for the different cooking
requirements by appropriately connecting
the heating elements and adjusting
temperature to the required level.
Oven Light - The oven light will be on
without any cooking function
Conventional cooking - The heat
comes from both the top and bottom
element, ensuring even heating
inside the oven.
Top heating element - The heat
comes from the top of the oven only.
Bottom heating element - The heat
comes from the bottom of the oven
only.
Inner grill element only - can be used
for grilling small quantities.
Double Grill - The full grill element
will be on.
Thermal Grilling - This function offers
an alternative method of cooking
food items, normally associated with
conventional grilling. The grill
element and the oven fan operate
together, circulating hot air around
the food.
When using this function, select a
maximum temperature of 200°C.
Fig. 1
Fig. 2
Fan cooking - This allows you to roast
or roast and bake simoultaneously
using any shelf, without flavour
transference.
Defrost Setting - This setting is
intended to assist in thawing of frozen
food.
5
Hotplate control knobs
The Control Knobs for the hotplates (Fig. 3)
can be found on the oven control panel. The
energy regulator of the hotplates can be set
by means of a 7-position control knob:
0 =Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Double circuit cooking zone
If you wish to have the two electric circuits
work simultaneously, turn the knob to Max
position (3) and then turn it towards symbol
“0”. You will hear a click. Now both circuits
work together. Then, you can regulate the
power of the cooking zone by turning the
control knob anticlockwise.
Carefully supervise cookings with
oil or fats, since these types of food
can result in a fire, when overheated.
Oven thermostat control light
This light goes off when the oven heats up
to the temperature set and comes on again
every time the thermostat cuts in to stabilize
temperature.
Operating control light
It indicates that one or more of the heating
elements are turned on.
Safety thermostat
In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
Fig. 3
Shelf supports
The oven has four shelf levels. The shelf
positions are counted from the bottom of the
oven as shown in figure 4.
6
The Cooling Fan for the Controls
This oven is provided with a cooling fan,
meant to keep the front panel, the knobs and
the oven door handle cool. This fan may run
on after the oven or grill is switched off, until
a normal temperature is reached.
4
3
2
1
Fig. 4
Loading...