Zanussi ZOU35902XU User Manual

GETTING STARTED?
EASY.
User Manual
ZOU35902XU
EN User Manual
Oven
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

CHILDREN AND VULNERABLE PEOPLE SAFETY

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away unless continuously supervised.
Children of less than 3 years of age should be kept away
unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, it should be activated.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.

GENERAL SAFETY

Only a qualified person must install this appliance and replace
the cable.
The control panel must be connected to specified heating unit
with matching colours of connectors, to avoid possible hazard.
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating elements.
2
Always use oven gloves to remove or put in accessories or
ovenware.
Before carrying out any maintenance, disconnect the appliance
from the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person
must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• The kitchen cabinet and the recess must have suitable dimensions.
• Keep the minimum distance from other appliances and units.
• Install the appliance in a safe and suitable place that meets installation requirements.
• Parts of the appliance carry current. Close the appliance with furniture to prevent touching the dangerous parts.
• The appliance is equipped with an electric cooling system. It must be operated with the electric power supply.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric
shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Do not let mains cables touch or come near the appliance door, especially when the door is hot.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that
3
there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
• This appliance complies with the E.E.C. Directives.
USE
WARNING! Risk of injury, burns and
electric shock or explosion.
• This appliance is for household use only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface or as a storage surface.
• Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air.
• Do not let sparks or open flames to come in contact with the appliance when you open the door.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING! Risk of damage to the appliance.
• To prevent damage or discoloration to the enamel:
– do not put ovenware or other objects in the
appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of cavity of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install the
accessories.
• Discoloration of the enamel or stainless steel has no effect on the performance of the appliance.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
• Always cook with the oven door closed.

CARE AND CLEANING

WARNING! Risk of injury, fire, or
damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• Make sure the appliance is cold. There is the risk that the glass panels can break.
• Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
• Be careful when you remove the door from the appliance. The door is heavy!
• Clean regularly the appliance to prevent the deterioration of the surface material.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects.
• If you use an oven spray, follow the safety instruction on it's packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.

INTERNAL LIGHTING

WARNING! Risk of electric shock.
• The type of light bulb or halogen lamp used for this appliance is for household appliances only. Do not use it for house lighting.
• Before replacing the lamp, disconnect the appliance from the power supply.
• Only use lamps with the same specifications.

SERVICE

• To repair the appliance contact an Authorised Service Centre.
4
• Use original spare parts only.
9
8
13
10
11
12
5
4
1
2
3
531 4 76 22

DISPOSAL

WARNING! Risk of injury or
suffocation.

PRODUCT DESCRIPTION

GENERAL OVERVIEW

• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.
• Remove the door catch to prevent children or pets from becoming trapped in the appliance.

Control panel

1
Knobs for the hob
2
Power lamp / symbol
3
Knob for the heating functions
4
Display
5
Control knob (for the temperature)
6
Temperature indicator / symbol
7
Heating element
8
Lamp
9
Fan
10
Aqua cleaning container
11
Shelf support, removable
12
Shelf positions
13

ACCESSORIES

Wire shelf For cookware, cake tins, roasts.
Combi pan
CONTROL PANEL

KNOBS FOR THE COOKING ZONES

You can operate the hob with the knobs for the cooking zones.
You must read the Safety chapters in the hob user manual.

HEAT SETTINGS

Knob indication Function
0 Off position
1 - 9 Heat settings
Double zone switch
For cakes and biscuits. To bake and roast or as a pan to collect fat.
1. Turn the knob to a necessary heat setting.
2. To complete the cooking process, turn the
knob to the off position.

USING THE DOUBLE ZONE (IF APPLICABLE)

To activate the double zone, turn the knob clockwise. Do not turn it through the stop position.
1. Turn the knob clockwise to position 9.
2. Turn the knob slowly to the symbol until you
can hear a click. The two cooking zones are on.
3. To set the necessary heat setting refer to "Heat settings".
5

BUTTONS

A B C
Sensor field / Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.

DISPLAY

A. Clock functions B. Timer C. Clock function

BEFORE FIRST USE

WARNING! Refer to Safety chapters.
To set the Time of day refer to "Clock functions" chapter.

INITIAL CLEANING

Remove all accessories and removable shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories before first use.
Put the accessories and the removable shelf supports back to their initial position.

DAILY USE

WARNING! Refer to Safety chapters.

RETRACTABLE KNOBS

To use the appliance press the knob. The knob comes out.

PREHEATING

Preheat the empty oven before first use.
1. Set the function .Set the maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function . Set the maximum
temperature.
4. Let the oven operate for 15 minutes.
5. Set the function . Set the maximum
temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool down.
Accessories can become hotter than usual. The oven can emit an odour and smoke. Make sure that the airflow in the room is sufficient.

SETTING A HEATING FUNCTION

1. Turn the knob for the heating functions to
select a heating function.
2. Turn the control knob to select the temperature.
The lamp turns on when the oven operates.
6
3. To turn off the oven, turn the knob for the heating functions to the off position.

HEATING FUNCTIONS

Oven function Application
The oven is off.
Off position
To turn on the lamp without a cooking function.
Light
To bake on up to three shelf positions at the same
True Fan Cooking
Moist Fan Bak-
ing
time and to dry food. Set the temperature 20 ­40 °C lower than for Con­ventional Cooking.
This function is designed to save energy during cook­ing. For the cooking in­structions refer to "Hints and tips" chapter, Moist Fan Baking. The oven door should be closed during cooking so that the function is not interrupted and to en­sure that the oven operates with the highest energy effi­ciency possible. When you use this function, the tem­perature in the cavity may differ from the set tempera­ture. The heating power may be reduced. For gener­al energy saving recom­mendations refer to "Energy Efficiency" chapter, Energy Saving.This function was used to comply with the en­ergy efficiency class ac­cording to EN 60350-1.
Oven function Application
To bake cakes with crispy bottom and to preserve
Bottom Heat
Grilling
Fast Grilling
Turbo Grilling
Pizza Setting
Conventional Cooking (Top / Bottom Heat) /
Aqua Clean
food.
To grill flat food and to toast bread.
To grill flat food in large quantities and to toast bread.
To roast larger meat joints or poultry with bones on one shelf position. To make gratins and to brown.
To bake pizza. To make in­tensive browning and a crispy bottom.
To bake and roast food on one shelf position. For more information about Aqua Clean, refer to "Care and cleaning" chapter.
7

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE

Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the opera-
tion of the appliance. You can set the MINUTE MINDER at any time, also when the appliance is off.

SETTING THE TIME. CHANGING THE TIME

You must set the time before you operate the oven. The flashes when you connect the appliance to
the electrical supply, when there was a power cut or when the timer is not set.
Press the or to set the correct time. After approximately five seconds, the flashing stops
and the display shows the time of day you set. To change the time of day press again and
again until starts to flash.

SETTING THE DURATION

1. Set an oven function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the DURATION time. The display shows .
4. When the time ends, flashes and an acoustic signal sounds. The appliance deactivates automatically.
5. Press any button to stop the acoustic signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.

SETTING THE END

1. Set an oven function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the time.
The display shows
4. When the time ends, flashes and an acoustic signal sounds. The appliance deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.

SETTING THE TIME DELAY

1. Set an oven function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the time for DURATION.
4. Press .
5. Press or to set the time for END.
6. Press to confirm.
Appliance turns on automatically later on, works for the set DURATION time and stops at the set END time. At the set time an acoustic signal sounds.
7. The appliance deactivates automatically. Press any button to stop the signal.
8. Turn the knob for the oven functions and the knob for the temperature to the off position.

SETTING THE MINUTE MINDER

1. Press again and again until starts to
flash.
2. Press or to set the necessary time.
The Minute Minder starts automatically after 5 seconds.
.
8
3. When the set time ends, an acoustic signal sounds. Press any button to stop the acoustic signal.
4. Turn the knob for the oven functions and the knob for the temperature to the off position.

USING THE ACCESSORIES

CANCELLING THE CLOCK FUNCTIONS

1. Press the again and again until the
necessary function indicator starts to flash.
2. Press and hold . The clock function goes out after some seconds.
WARNING! Refer to Safety chapters.

INSERTING THE ACCESSORIES

Wire shelf: Push the shelf between the guide bars of the shelf
support and make sure that the feet point down.
Deep pan: Push the deep pan between the guide bars of the
shelf support.
Wire shelf and deep pan together: Push the deep pan between the guide bars of the
shelf support and the wire shelf on the guide bars above.
Small indentation at the top increase safety. The indentations are also anti­tip devices. The high rim around the shelf prevents cookware from slipping of the shelf.

ADDITIONAL FUNCTIONS

COOLING FAN

When the oven operates, the cooling fan turns on automatically to keep the surfaces of the oven cool. If you turn off the oven, the cooling fan can continue to operate until the oven cools down.

SAFETY THERMOSTAT

Incorrect operation of the oven or defective components can cause dangerous overheating. To prevent this, the oven has a safety thermostat which interrupts the power supply. The oven turns on again automatically when the temperature drops.
9
Loading...
+ 19 hidden pages