Zanussi ZOP37922XU User Manual
GETTING
STARTED?
EASY.
User Manual
ZOP37922XU
EN User Manual
Oven
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away unless
continuously supervised.
• Children of less than 3 years of age should be kept away
unless continuously supervised.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of it
appropriately.
• Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, it should be activated.
• Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
GENERAL SAFETY
• Only a qualified person must install this appliance and replace
the cable.
• WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
• Always use oven gloves to remove or put in accessories or
ovenware.
2
• Before carrying out any maintenance, disconnect the appliance
from the power supply.
• Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
• If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
• Excessive spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with
the appliance.
• Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
• Do not pull the appliance by the handle.
• Keep the minimum distance from other
appliances and units.
• Install the appliance in a safe and suitable place
that meets installation requirements.
• The sides of the appliance must stay adjacent to
appliances or units with the same height.
• The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
• All electrical connections should be made by a
qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension
cables.
• Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
• The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
• If the mains socket is loose, do not connect the
mains plug.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
3
removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
must have a contact opening width of minimum
3 mm.
• Fully close the appliance door, before you
connect the mains plug to the mains socket.
• This appliance complies with the E.E.C.
Directives.
USE
WARNING! Risk of injury, burns and
electric shock or explosion.
• This appliance is for household use only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings are not
blocked.
• Do not let the appliance stay unattended during
operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door
while the appliance is in operation. Hot air can
release.
• Do not operate the appliance with wet hands or
when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface or
as a storage surface.
• Open the appliance door carefully. The use of
ingredients with alcohol can cause a mixture of
alcohol and air.
• Do not let sparks or open flames to come in
contact with the appliance when you open the
door.
• Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
WARNING! Risk of damage to the
appliance.
• To prevent damage or discoloration to the
enamel:
– do not put ovenware or other objects in the
appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of cavity of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install the
accessories.
• Discoloration of the enamel or stainless steel
has no effect on the performance of the
appliance.
• Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
• This appliance is for cooking purposes only. It
must not be used for other purposes, for
example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a furniture
panel (e.g. a door) make sure the door is never
closed when the appliance is in operation. Heat
and moisture can build up behind a closed
furniture panel and cause subsequent damage
to the appliance, the housing unit or the floor.
Do not close the furniture panel until the
appliance has cooled down completely after
use.
CARE AND CLEANING
WARNING! Risk of injury, fire, or
damage to the appliance.
• Before maintenance, deactivate the appliance
and disconnect the mains plug from the mains
socket.
• Make sure the appliance is cold. There is the
risk that the glass panels can break.
• Replace immediately the door glass panels
when they are damaged. Contact the
Authorised Service Centre.
• Be careful when you remove the door from the
appliance. The door is heavy!
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Clean the appliance with a moist soft cloth. Only
use neutral detergents. Do not use any abrasive
products, abrasive cleaning pads, solvents or
metal objects.
• If you use an oven spray, follow the safety
instruction on it's packaging.
• Do not clean the catalytic enamel (if applicable)
with any kind of detergent.
PYROLYTIC CLEANING
WARNING! Risk of Injury / Fires /
Chemical Emissions (Fumes) in
Pyrolytic Mode.
• Before carrying out a Pyrolitic self-cleaning
function or the First Use please remove from the
oven cavity:
– any excess food residues, oil or grease
spills / deposits.
– any removable objects (including shelves,
side rails etc., provided with the product)
4
particularly any non-stick pots, pans, trays,
utensils etc.
• Read carefully all the instructions for Pyrolytic
cleaning.
• Keep children away from the appliance while the
Pyrolytic cleaning is in operation.
The appliance becomes very hot and hot air is
released from the front cooling vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from cooking
residues and construction materials, as such
consumers are strongly advised to:
– provide good ventilation during and after
each Pyrolytic cleaning.
– provide good ventilation during and after
the first use at maximum temperature
operation.
• Unlike all humans, some birds and reptiles can
be extremely sensitive to potential fumes
emitted during the cleaning process of all
Pyrolytic Ovens.
– Remove any pets (especially birds) from the
vicinity of the appliance location during and
after the Pyrolytic cleaning and first use
maximum temperature operation to a well
ventilated area.
• Small pets can also be highly sensitive to the
localized temperature changes in the vicinity of
all Pyrolytic Ovens when the Pyrolytic self
cleaning program is in operation.
• Non-stick surfaces on pots, pans, trays, utensils
etc., can be damaged by the high temperature
Pyrolytic cleaning operation of all Pyrolytic
Ovens and can be also a source for low level
harmful fumes.
• Fumes released from all Pyrolytic Ovens /
Cooking Residues as described are not harmful
to humans, including infants or persons with
medical conditions.
INTERNAL LIGHTING
WARNING! Risk of electric shock.
• The type of light bulb or halogen lamp used for
this appliance is for household appliances only.
Do not use it for house lighting.
• Before replacing the lamp, disconnect the
appliance from the power supply.
• Only use lamps with the same specifications.
SERVICE
• To repair the appliance contact an Authorised
Service Centre.
• Use original spare parts only.
DISPOSAL
WARNING! Risk of injury or
suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to the
appliance and dispose of it.
• Remove the door catch to prevent children or
pets from becoming trapped in the appliance.
5
PRODUCT DESCRIPTION
1 3 42
5
6
7
8
9
4
3
2
1
10
A B
DG EF C
GENERAL OVERVIEW
Control panel
1
Knob for the heating functions
2
Display
3
Knob for the temperature
4
Air vents for the cooling fan
5
Heating element
6
Lamp
7
Fan
8
Shelf support, removable
9
Shelf positions
10
ACCESSORIES
• Wire shelf
For cookware, cake tins, roasts.
• Baking tray
For cakes and biscuits.
CONTROL PANEL
BUTTONS
Sensor field / Button Function Description
DISPLAY
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.
• Telescopic runners
For shelves and trays.
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
A. Timer / Temperature
B. Heat-up and residual heat indicator
C. Core temperature sensor (selected models
only)
D. Door lock (selected models only)
E. Hours / minutes
F. Demo mode (selected models only)
G. Clock functions
6
BEFORE FIRST USE
WARNING! Refer to Safety chapters.
To set the Time of day refer to "Clock
functions" chapter.
INITIAL CLEANING
Remove all accessories and removable shelf
supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories before first
use.
DAILY USE
WARNING! Refer to Safety chapters.
RETRACTABLE KNOBS
To use the appliance press the knob. The knob
comes out.
HEATING FUNCTIONS
Oven function Application
The oven is off.
Off position
To bake on up to two shelf
positions at the same time
True Fan
Cooking
Conventional
Cooking (Top /
Bottom Heat)
and to dry food. Set the
temperature 20 - 40 °C
lower than for Conventional
Cooking.
To bake and roast food on
one shelf position.
Put the accessories and the removable shelf
supports back to their initial position.
PREHEATING
Preheat the empty oven before first use.
1. Set the function and the maximum
temperature.
2. Let the oven operate for 1 hour.
3. Set the function and set the maximum
temperature.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool down.
Accessories can become hotter than usual. The
oven can emit an odour and smoke. Make sure that
the airflow in the room is sufficient.
Oven function Application
To grill flat food and to
toast bread.
Grilling
To grill flat food in large
quantities and to toast
Fast Grilling
Turbo Grilling
Bottom Heat
Pizza Setting
bread.
To roast larger meat joints
or poultry with bones on
one shelf position. To make
gratins and to brown.
To bake cakes with crispy
bottom and to preserve
food.
To bake pizza. To make intensive browning and a
crispy bottom.
7
Oven function Application
Oven function Application
This function is designed to
save energy during cook-
Moist Fan Bak-
ing
ing. For the cooking instructions refer to "Hints
and tips" chapter, Moist
Fan Baking. The oven door
should be closed during
cooking so that the function
is not interrupted and to ensure that the oven operates
with the highest energy efficiency possible. When you
use this function, the temperature in the cavity may
differ from the set temperature. The residual heat is
used.The heating power
may be reduced. For general energy saving recommendations refer to "Energy
Efficiency" chapter, Energy
Saving.This function was
used to comply with the energy efficiency class according to EN 60350-1.
When you use this function
the lamp automatically turns
off after 30 seconds.
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function Application
To show or change the time
TIME OF DAY
DURATION
END
TIME DELAY
of day. You can change the
time of day only when the
oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven turns
off. Use only when a heating function is set.
Combination of DURATION
and END function.
To defrost food (vegetables
and fruit). The defrosting
Defrost
Pyrolysis
SETTING A HEATING FUNCTION
1. Turn the knob for the heating functions to
select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven operates.
3. To turn off the oven, turn the knobs to the off
position.
HEAT-UP INDICATOR
When the oven function operates, the bars in the
display
temperature in the oven increases, and disappear
when it decreases.
Clock function Application
appear one by one when the
MINUTE
MINDER
00:00
COUNT UP
TIMER
time depends on the
amount and size of the frozen food.
To turn on the pyrolytic
cleaning of the oven. This
function burns off residual
dirt in the oven.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is off.
If you do not set any other
clock function the COUNT
UP TIMER automatically
monitor how long the oven
works.
It is on immediately when
the oven starts to heat.
The Count Up Timer cannot
be used with the functions:
DURATION, END.
8
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows and "12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and set the minutes.
The display shows
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press again and
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the minutes and then the
hours. Press to confirm.
When the set Duration time ends the signal sounds
for 2 minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
SETTING THE END FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the hours and then the
minutes. Press to confirm.
At the set End time the signal sounds for 2 minutes.
and time setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
and the set hour. "00"
SETTING THE TIME DELAY FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the minutes and then the
hours for DURATION time. Press to
confirm.
The display shows flashing .
4. Press or to set the hours and then the
minutes for END time. Press to confirm. The
display shows and the set
temperature.
Oven turns on automatically later on, works for the
set DURATION time and stops at the set END time.
At the set END time the signal sounds for 2
minutes. and time setting flash in the display.
The oven turns off.
5. Press any button or open the oven door to stop
the signal.
6. Turn the knobs to the off position.
SETTING THE MINUTE MINDER
Minute minder can be both set when the oven is
turned on and off.
1. Press
flash.
2. Press or to set the seconds and than
the minutes.
When the time you set is longer than 60
minutes, flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts automatically after
5 seconds.
After 90% of the set time the signal sounds.
5. When the set time ends the signal sounds for 2
minutes. "00:00" and flash in the display.
Press any button to stop the signal.
COUNT UP TIMER
To reset the Count Up Timer, press and hold
and . The timer starts to count up again.
again and again until starts to
USING THE ACCESSORIES
WARNING! Refer to Safety chapters.
INSERTING THE ACCESSORIES
Wire shelf:
Push the shelf between the guide bars of the shelf
support and make sure that the feet point down.
9
Loading...