Zanussi ZOP37902BK, ZOP37902XK User Manual
EN
ZOP37902BK
ZOP37902XK
User Manual
Oven
Contents
Safety information 2
Safety instructions 3
Product description 6
Before first use 6
Daily use 6
Clock functions
8
Using the accessories
10
Additional functions 11
Hints and tips 12
Care and cleaning 20
Troubleshooting 23
Installation 24
Energy efficiency
26
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of it
appropriately.
• Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, this should be
activated.
• Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
• Children aged 3 years and under must be kept away from this
appliance when it is in operation at all times.
General Safety
• Only a qualified person must install this appliance and replace
the cable.
2 www.zanussi.com
• WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements. Children less than 8 years of age shall be kept away
unless continuously supervised.
• Always use oven gloves to remove or put in accessories or
ovenware.
• Before maintenance cut the power supply.
• Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
• If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
• Excessive spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
• The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
Safety instructions
Installation
WARNING!
Only a qualified person must install
this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied
with the appliance.
• Always take care when moving the appliance
as it is heavy. Always use safety gloves and
enclosed footwear.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other
appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with the
same height.
• The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be made by
a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
www.zanussi.com 3
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
• Do not let mains cables touch or come near
the appliance door, especially when the door
is hot.
• The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• If the mains socket is loose, do not connect
the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
• Fully close the appliance door, before you
connect the mains plug to the mains socket.
• This appliance complies with the E.E.C.
Directives.
Use
WARNING!
Risk of injury, burns and electrical
shock or explosion.
• This appliance is for household use only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings are
not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation. Hot
air can release.
• Do not operate the appliance with wet hands
or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface
or as a storage surface.
• Open the appliance door carefully. The use
of ingredients with alcohol can cause a
mixture of alcohol and air.
• Do not let sparks or open flames to come in
contact with the appliance when you open
the door.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to the
enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on
the performance of the appliance.
• Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
• This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a furniture
panel (e.g. a door) make sure the door is
never closed when the appliance is in
operation. Heat and moisture can build up
behind a closed furniture panel and cause
subsequent damage to the appliance, the
housing unit or the floor. Do not close the
furniture panel until the appliance has cooled
down completely after use.
Care and cleaning
WARNING!
Risk of injury, fire, or damage to the
appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There is the
risk that the glass panels can break.
4 www.zanussi.com
• Replace immediately the door glass panels
when they are damaged. Contact the
Authorised Service Centre.
• Be careful when you remove the door from
the appliance. The door is heavy!
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use any
abrasive products, abrasive cleaning pads,
solvents or metal objects.
• If you use an oven spray, obey the safety
instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Pyrolytic cleaning
Risk of Injury / Fires / Chemical
Emissions (Fumes) in Pyrolitic Mode.
• Before carrying out a Pyrolitic self-cleaning
function or the First Use please remove from
the oven cavity:
– any excess food residues, oil or grease
spills / deposits.
– any removable objects (including
shelves, side rails etc., provided with the
product) particularly any non-stick pots,
pans, trays, utensils etc.
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the appliance while
the Pyrolytic cleaning is in operation.
The appliance becomes very hot and hot air
is released from the front cooling vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction materials,
as such consumers are strongly advised to:
– provide good ventilation during and after
each Pyrolytic cleaning.
– provide good ventilation during and after
the first use at maximum temperature
operation.
• Unlike all humans, some birds and reptiles
can be extremely sensitive to potential fumes
emitted during the cleaning process of all
Pyrolytic Ovens.
– Remove any pets (especially birds) from
the vicinity of the appliance location
during and after the Pyrolytic cleaning
and first use maximum temperature
operation to a well ventilated area.
• Small pets can also be highly sensitive to the
localized temperature changes in the vicinity
of all Pyrolytic Ovens when the Pyrolytic self
cleaning program is in operation.
• Non-stick surfaces on pots, pans, trays,
utensils etc., can be damaged by the high
temperature Pyrolytic cleaning operation of
all Pyrolytic Ovens and can be also a source
for low level harmful fumes.
• Fumes released from all Pyrolytic Ovens /
Cooking Residues as described are not
harmful to humans, including infants or
persons with medical conditions.
Internal light
• The type of light bulb or halogen lamp used
for this appliance is only for household
appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the
appliance from the power supply.
• Only use lamps with the same specifications.
Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
• Remove the door catch to prevent children
or pets from becoming trapped in the
appliance.
Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
www.zanussi.com 5
Product description
General overview
6
5
9
7
8
5
4
1
2
3
31 42
1
Control panel
2
Knob for the oven functions
3
Electronic programmer
4
Knob for the temperature
5
Heating element
6
Lamp
7
Fan
8
Shelf support, removable
9
Shelf positions
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.
• Trivet
For roasting and grilling.
Use the trivet only with the Grill- /
roasting pan.
Before first use
WARNING!
Refer to Safety chapters.
To set the Time of day refer to
"Clock functions" chapter.
Initial Cleaning
Remove all accessories and removable shelf
supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories before
first use.
Put the accessories and the removable shelf
supports back to their initial position.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function and the maximum
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and set the maximum
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
Daily use
WARNING!
Refer to Safety chapters.
Retractable knobs
To use the appliance, press the control knob.
The control knob comes out.
6 www.zanussi.com
Activating and deactivating the
appliance
It depends on the model if your
appliance has lamps, knob
symbols or indicators:
• The lamp comes on when the
appliance operates.
• The symbol shows whether the
knob controls the oven functions
or the temperature.
• The indicator comes on when the
oven heats up.
1. Turn the knob for the oven functions to
select an oven function.
2. Turn the knob for the temperature to select
a temperature.
3. To deactivate the appliance turn the knobs
for the oven functions and temperature to
the off position.
Oven functions
Oven function Application
Off position The appliance is off.
True Fan Cooking To bake on up to three shelf positions at the same time and to
dry food. Set the temperature 20 - 40 °C lower than for Top /
Bottom Heat.
Top / Bottom Heat To bake and roast food on one shelf position.
Moist Fan Baking To prepare baked goods in tin on one shelf position. To save en-
ergy during cooking. This function must be used in accordance
with the cooking tables in order to achieve the desired cooking
result. To get more information about the recommended settings, refer to the cooking tables. This function was used to define the energy efficiency class acc. to EN 60350-1.
Fast Grilling To grill flat food in large quantities and to toast bread.
Turbo Grilling To roast larger meat joints or poultry with bones on one shelf
position. Also to make gratins and to brown.
Pizza Setting To bake food on one shelf position for a more intensive brown-
ing and a crispy bottom. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.
Meat To prepare very tender and juicy roasts.
Keep Warm To keep food warm.
www.zanussi.com 7
Oven function Application
Defrost This function can be used for defrosting frozen foods, such as
vegetables and fruits. The defrosting time depends on the
amount and size of the frozen food.
Pyrolysis To activate the automatic pyrolytic cleaning of the oven. This
function burns off residual dirt in the oven.
Display
A B C
D
EFG
A. Timer
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected models
only)
E. Door lock (selected models only)
F. Hours / minutes
G. Clock functions
Buttons
Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
Heat-up indicator
When you activate an oven function, the bars in
the display come on one by one. The bars
show that the oven temperature increases or
decreases.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the time of
day only when the appliance is off.
DURATION To set how long the appliance operates. Use only when an oven
function is set.
END To set when the appliance deactivates. Use only when an oven
function is set.
8 www.zanussi.com
Clock function Application
TIME DELAY To combine DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MINDER at
any time, also if the appliance is off.
00:00 COUNT UP TIMER If you do not set any other clock function the COUNT UP TIMER
automatically monitor how long the appliance operates. It is on
immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait until
the display shows and "12:00". "12"
flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set the
minutes.
The display shows and the set hour. "00"
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day
will be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press again and
again until the indicator for the time of day
flashes in the display.
Setting the DURATION
1. Set an oven function.
2. Press again and again until starts to
flash.
3. Press
or to set the minutes and the
hours for DURATION time.
4. Press to confirm.
When the time ends an acoustic signal sounds
for 2 minutes. and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to the
off position.
Setting the END
1. Set an oven function.
2. Press again and again until starts to
flash.
3. Press or to set the hours and the
minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds for 2
minutes. and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to the
off position.
Setting the TIME DELAY function
1. Set an oven function.
2. Press again and again until starts to
flash.
3. Press or to set the minutes and the
hours for DURATION time.
4. Press to confirm. The display shows
flashing .
5. Press or to set the hours and the
minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on, works
for the set DURATION time and stops at the set
END time. At the set time an acoustic signal
sounds for 2 minutes. and time setting flash
in the display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
www.zanussi.com 9
Loading...