Zanussi ZOE35511X User Manual

EN
ZOE35511X
User Manual
Oven
Contents
Safety information 2 Safety instructions 3 Product description 5 Before first use 6 Daily use 6 Clock functions
8
Using the accessories 9 Additional functions 10 Hints and tips 10 Care and cleaning 15 Troubleshooting 17 Energy efficiency
18
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, this should be
activated.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
Children aged 3 years and under must be kept away from this
appliance when it is in operation at all times.
General Safety
Only a qualified person must install this appliance and replace
the cable.
2 www.zanussi.com
The control panel must be connected to specified heating unit
with matching colours of connectors, to avoid possible hazard.
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
Always use oven gloves to remove or put in accessories or
ovenware.
Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
Safety instructions
Installation
WARNING!
Only a qualified person must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instruction supplied with the appliance.
Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must have suitable dimensions.
Keep the minimum distance from the other appliances and units.
Make sure that the appliance is installed below and adjacent safe structures.
Parts of the appliance carry current. Close the appliance with furniture to prevent touching the dangerous parts.
The sides of the appliance must stay adjacent to appliances or to units with the same height.
The appliance is equipped with an electric cooling system. It must be operated with the electric power supply.
Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be made by a qualified electrician.
www.zanussi.com 3
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
Do not let mains cables touch or come near the appliance door, especially when the door is hot.
The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
If the mains socket is loose, do not connect the mains plug.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
This appliance complies with the E.E.C. Directives.
Use
WARNING!
Risk of injury, burns and electrical shock or explosion.
This appliance is for household use only.
Do not change the specification of this appliance.
Make sure that the ventilation openings are not blocked.
Do not let the appliance stay unattended during operation.
Deactivate the appliance after each use.
Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
Do not operate the appliance with wet hands or when it has contact with water.
Do not apply pressure on the open door.
Do not use the appliance as a work surface or as a storage surface.
Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air.
Do not let sparks or open flames to come in contact with the appliance when you open the door.
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
Do not use microwave function to preheat the oven.
WARNING!
Risk of damage to the appliance.
To prevent damage or discoloration to the enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
Discoloration of the enamel has no effect on the performance of the appliance.
Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
Always cook with the oven door closed.
Care and cleaning
WARNING!
Risk of injury, fire, or damage to the appliance.
Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
Make sure the appliance is cold. There is the risk that the glass panels can break.
Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
Be careful when you remove the door from the appliance. The door is heavy!
4 www.zanussi.com
Clean regularly the appliance to prevent the deterioration of the surface material.
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects.
If you use an oven spray, obey the safety instructions on the packaging.
Do not clean the catalytic enamel (if applicable) with any kind of detergent.
Internal light
The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
Before replacing the lamp, disconnect the appliance from the power supply.
Only use lamps with the same specifications.
Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the mains supply.
Cut off the mains electrical cable close to the appliance and dispose of it.
Remove the door catch to prevent children or pets from becoming trapped in the appliance.
Service
To repair the appliance contact an Authorised Service Centre.
Use original spare parts only.
Product description
General overview
1 3 5 6 742 24
8
10
9
9
11
11
1
2
3
4
12
1
2
3
4
12
1
Knob for the top oven functions
2
Power lamp / symbol
3
Knob for the top oven temperature
4
Temperature indicator / symbol
5
Electronic programmer
6
Knob for the main oven functions
7
Knob for the main oven temperature
8
Heating element
9
Lamp
10
Fan
11
Shelf support, removable
12
Shelf positions
Accessories
Wire shelf For cookware, cake tins, roasts.
Grill- / Roasting pan To bake and roast or as pan to collect fat.
Trivet For roasting and grilling.
Use the trivet only with the Grill- / roasting pan.
www.zanussi.com 5
Before first use
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories and removable shelf supports from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance and the accessories before first use. Put the accessories and the removable shelf supports back to their initial position.
Setting the time
You must set the time before you operate the oven.
Only the top oven works without the set time.
The indicator for the Time of day function flashes when you connect the appliance to the electrical supply, when there was a power cut or when the timer is not set.
Press the or button to set the correct time. After approximately five seconds, the flashing stops and the display shows the time of day you set.
Changing the time
You cannot change the time of day if the Duration or End function
operates.
Press again and again until the indicator for the Time of Day function flashes. To set a new time, refer to "Setting the time".
Preheating
Preheat the empty appliance to burn off the remaining grease.
Preheat the two ovens. Heat up one oven at a time. Set the functions listed below, if applicable.
1. Set the function and the temperature to
250ºC. Let the appliance operate for 1 hour.
2. Set the function and the temperature to
250ºC. Let the appliance operate for 15 minutes.
3. Set the function and the temperature to
250ºC.
Let the appliance operate for 15 minutes. Accessories can become hotter than usual. The appliance can emit an odour and smoke. This is normal. Make sure that the airflow is sufficient.
Daily use
WARNING!
Refer to Safety chapters.
6 www.zanussi.com
Loading...
+ 14 hidden pages