These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
•It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
•It is dangerous to alter the specification in any way.
•Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
Child Safety
•This appliance has been designed to be operated by
adults and children under supervision. Young children
MUSTNOT be allowed to tamper with the controls or play
near or with the oven.
•Accessible parts of this appliance may become hot
when it is in use. Children should be KEPTAWAY until it
has cooled.
During use
•This appliance has been designed for cooking edible
foodstuff only and MUSTNOT be used for any other
purposes.
•Ensure that all control knobs are in the OFF position
when not in use.
•Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
•If the appliance is out of order, disconnect it from the
electric supply.
•Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
•Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
•Appliances become very hot with use, and retain their
heat for long periods after use. Care should be taken
to avoid touching heating elements inside the oven.
•Always stand back from the oven when opening
the oven door during cooking or at the end of it
to allow any build up of steam or heat to release.
•Never use steam or high pressure steam cleaners to
clean the appliance.
•Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
•Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the
oven.
•This appliance is meant to operate with a singlephased connection to 230 V electrical supply. An
eventual 400 V poliphasic connection without earth
wire will destroy the oven and the hob, if fitted.
•The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
•Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
•After installation, please dispose of the packaging with
due regard to safety and the environment.
•When disposing of an old appliance, make it unusable,
by cutting off the cable.
•
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
Guide to Use the instructions
The following symbols will be found in the text to guide you
throughout the Instructions:
Safety Instructions
•Always use oven gloves to remove pans from the oven.
•For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
2
Step by step instructions for an operation
)
Hints and Tips
Environmental information
Contents
For the UserFor the Installer
Important Safety Information2
Description of the Oven3
Controls4
When the oven is first installed5
Electronic programmer6
Using the Oven8
Cooking Tables10
Cleaning and Maintenance12
Something not working...14
Technical Assistance15
It is most important that this instruction book
is be retained with the appliance for future
reference. Should the appliance be sold or
transferred, always ensure that the book is left
with the appliance in order that the new
owner can get to know the functions of the
appliance and the relevant warnings.
The oven is provided with push-pull control knobs (Fig.
1). These knobs can be completely sunken inside the
control panel when the oven is not working.
Oven function control knob (Fig. 2)
The oven function control knob can have the following
symbols and functions:
Oven Light - The oven light will be on
without any cooking function
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Top heating element - The heat comes
from the top of the oven only.
Bottom heating element - The heat
comes from the bottom of the oven only.
Inner grill element only - can be used for
grilling small quantities.
Grill turnspit - The turnspit can be used
for either spit roasting meat or for kebabs
and smaller pieces of meat.
Double Grill - The full grill element will be
on.
Thermal Grilling - This function offers an
alternative method of cooking food items,
normally associated with conventional
grilling. The grill element and the oven fan
operate together, circulating hot air around
the food. When using this function,
select a maximum temperature of
200°C.
Fan cooking - This allows you to roast or
roast and bake simoultaneously using any
shelf, without flavour transference.
Fig. 1
Fig. 2
Defrost Setting - This setting is intended
to assist in thawing of frozen food.
Thermostat control knob (Fig. 3)
Turn the thermostat control knob to select temperatures
between 50°C and 230°C (MAX).
Oven control light (I)
It will come on every time an heating element is set on
operation.
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the temperature is being maintained.
4
Fig. 3
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The cooling fan
The cooling fan is designed to cool the walls of the oven
and the components of the oven itself.
The fan switches on automatically after a few minutes of
cooking. Warm air is blown out through the aperture near
the oven door handle. When the oven is switched off, the
fan will remain on in order to cool the oven and kitchen
cabinets properly, after which it switches off automatically.
NOTE: The fan may run up to 45 minutes after cooking
has been completed. Leaving the door ajar will lessen
the cooling time.
Fig. 4
FO 2259
When the oven is first installed
The oven will work only if the time of day has
been set with the electronic programmer.
Before cooking for the first time, carefully wash
the oven accessories.
Once the oven has been installed:
)
a) set the thermostat knob to MAX (230°C);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan cooking function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
Fig. 5
FO 2161
To open the oven door, always catch the
handle in its central part (Fig. 5).
5
Electronic programmer
1. Push button for selecting a function
2. Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
5
6
Fig. 6
4
7
8
123
The oven will work only if the time of day has been set.
Moreover, the oven can also be operated without any programme.
FO 2571
Setting the time of day
When the power supply is switched on, or after a power failure, the “Time
of day” pilot lamp will flash on the display.
To set the correct time of day:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the “Time of day”
pilot lamp will go out and the display will show the set time. The
appliance is ready for use.
To reset the correct time of day:
1. press button repeatedly to select the “Time of day” function. The
relevant pilot lamp will start flashing. Then proceed as described
above.
The time of day may be reset only if no automatic function (cook
duration or end of cooking ) has been set.
“Cooking Duration” function
Thanks to this function, the oven will automatically switch off at the end
of a programmed cooking duration time. Place food in the oven, select
a cooking function and adjust the cooking temperature. Press button
repeatedly to select the “Cooking Duration” function. The relevant pilot
lamp will start flashing. Then, proceed as follows:
To set the duration time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the "Cooking
Duration" pilot lamp will come on and the display will revert to
the time of day.
3. When cooking time is over, the oven will be switched off automatically
and an acoustic alarm will be heard, while the pilot lamp will start
flashing. Turn the oven function and the thermostat control knob to
zero.
To switch off the acoustic alarm, press any button. NOTE: when
doing this operation, the oven will be operated again, therefore,
remember to turn the oven function and the thermostat control knob
to zero at the end of the cooking time.
To cancel the duration time:
1. Press button repeatedly to select the “Cooking Duration” function.
The relevant pilot lamp will flash and the display will show the
remaining cooking time.
2. Press button “ ” until the display shows “0:00”. After 5 seconds
the pilot lamp will go out and the display will revert to the time of
day.
6
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.