Zanussi ZOB882 USER MANUAL
ELECTRIC
OVEN
ZOB 882
INSTRUCTION BOOKLET
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
It is dangerous to alter the specification in any way.
Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Child Safety
This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
During use
This appliance has been designed for cooking edible
foodstuff only and MUST NOT be used for any other
purposes.
Ensure that all control knobs are in the OFF position
when not in use.
Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
Always use oven gloves to remove pans from the oven.
For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
Some parts of the appliance are covered by a shock-
proof plastic film. Remove this film before using the
oven.
This appliance is meant to operate with a single-
phased connection to 230V electrical supply. An
eventual 400V poliphasic connection without earth
wire will destroy the oven and the hob, if fitted.
Environmental Information
After installation, please dispose of the packaging with
due regard to safety and the environment.
When disposing of an old appliance, make it unusable,
by cutting off the cable.
It is most important that this instruction book
is be retained with the appliance for future
reference. Should the appliance be sold or
transferred, always ensure that the book is left
with the appliance in order that the new
owner can get to know the functions of the
appliance and the relevant warnings.
Guide to Use the instructions
The following symbols will be found in the text to guide
you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
F
Hints and Tips
Environmental information
This appliance complies with the following
E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336
- 93/68 (General Directives)
and subsequent modifications.
MANUFACTURER: ELECTROLUX ZANUSSI S.p.A.
(Electromagnetical Compatibility Directive);
Viale Bologna, 298
47100 FORLÌ (Italy)
2
Contents
For the User For the Installer
Important Safety Information 2
Description of the Oven 3
Oven Controls 4
When the oven is first installed 5
Electronic programmer 6
Using the oven 8
Cooking Tables 9
Cleaning and maintenance 11
Technical Assistance 13
Something not working... 13
Technical Data 14
Installation 14
OVEN DOOR PROTECTION DEVICE
(stainless steel models)
All our appliances comply with the European Safety
Standards. Nevertheless, in order to ensure the
highest safety level, and avoid little children to be
exposed to the heat when the appliance is operated,
it is possible to fit a special protection device to the
oven door. This device can be purchased in our
Service Force Centres, specifying the relevant code
( 35791) and the Product No. shown on the rating
plate. Fitting instructions are provided with the kit
package.
Description of the Oven
4
56
3
2
1
7
8
9
10
1. Control panel
2. Oven function control knob
3. Electronic programmer
4. Oven thermostat control knob
5. Oven control light
6. Thermostat control light (°C)
7. Grill
8. Oven lamp
9. Oven fan
10.Rating plate
3
Oven Controls
Oven function control knob
(Fig. 1)
The oven function control knob can have the following
symbols and functions:
0 OFF
Oven Light - The oven light will be on without any
cooking function
Conventional cooking - The heat comes from both
the top and bottom element, ensuring even heating
inside the oven.
Top heating element - The heat comes from the top
of the oven only.
Bottom heating element - The heat comes from the
bottom of the oven only.
Inner grill element only - can be used for grilling
small quantities.
Double Grill - The full grill element will be on.
Thermal Grilling - This function offers an alternative
method of cooking food items, normally associated
with conventional grilling. The grill element and the
oven fan operate together, circulating hot air around
the food. When using this function, select a
maximum temperature of 200°C and do not
exceed 1 hour of operation.
Fan cooking - This allows you to roast or roast and
bake simoultaneously using any shelf, without
flavour transference.
Defrost Setting - This setting is intended to assist
in thawing of frozen food.
Fig. 1
0
FO2672
50
MAX
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the temperature is being maintained.
Oven control light
It will come on every time an heating element is set on
operation.
4
Fig. 2
100
200
150
FO 2673
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The Cooling Fan for the Controls
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
When the oven is first installed
Before cooking for the first time, carefully wash
the oven accessories.
The oven will work only if the time of day
has been set (please read the relevant
instructions).
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan cooking function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
To open the oven door, always catch the
handle in its central part (Fig. 3).
Fig. 3
FO 2161
5
Loading...