Zanussi ZOB689 USER MANUAL
BUILT-IN OVEN
ZOB 689
INSTRUCTION BOOKLET
IL
35687-6701
English
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
•It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations.
•It is dangerous to alter the specification in any way.
•Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.
Child Safety
•This appliance has been designed to be operated by adultsandchildrenundersupervision.Youngchildren MUST NOT be allowed to tamper with the controls or play
near or with the oven.
•Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled.
•Never use steam or high pressure steam cleaners to clean the appliance.
•Disconnect the appliance from the electrical supply, beforecarryingoutanycleaningormanteinancework.
•Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the oven.
•This appliance is meant to operate with a singlephased connection to 230 V electrical supply. An eventual 400 V poliphasic connection without earth wire will destroy the oven and the hob, if fitted.
•The manufacturer disclaims any responsability should all the safety measures not be carried out.
Service
•Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
During use
•This appliance has been designed for cooking edible foodstuff only and MUST NOT be used for any other purposes.
•Ensure that all control knobs are in the OFF position when not in use.
•Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance.
•If the appliance is out of order, disconnect it from the electric supply.
•Do not leave untensils containing foodstuffs, e. g. fat or oil in or on the appliance. This could cause damage in case the appliance is inadvertently switched on.
•Always place the dripping pan in position to collect fat when using the grill or when cooking meat. Pour a little water into the dripping pan to avoid smoke and unpleasant smells.
•Appliances become very hot with use, and retain their heat for long periods after use. Care should be taken to avoid touching heating elements inside the oven.
•Always stand back from the oven when opening the oven door during cooking or at the end of it to allow any build up of steam or heat to release.
•Alwaysuseovenglovestoremovepansfromtheoven.
•Forhygieneandsafetyreasons,thisapplianceshould be kept clean at all times. A build-up of fats or other foodstuff could result in a fire.
2
Environmental Information
•After installation, please dispose of the packaging with due regard to safety and the environment.
•When disposing of an old appliance, make it unusable, by cutting off the cable.
•The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Guide to Use the instructions
Thefollowingsymbolswillbefoundinthetexttoguideyou throughout the Instructions:
Safety Instructions
)Step by step instructions for an operation Hints and Tips
Environmental information
Contents
For the User
Important Safety Information |
2 |
Description of the Oven |
3 |
Controls |
4 |
When the oven is first installed |
5 |
Using the Oven |
6 |
Electronic programmer |
7 |
Using the oven |
6 |
Cooking Tables |
8 |
Cleaning and Maintenance |
10 |
Technical Assistance |
12 |
For the Installer
Something not working... |
12 |
Technical Data |
13 |
Installation |
14 |
Electrical connection |
15 |
It is most important that this instruction book is be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
Description of the Oven
3 |
6 |
2 |
4 |
5 |
1
7
8
9 |
10 |
11
1. |
Control panel |
7. |
Grill |
2. |
Thermostat Control Knob |
8. |
Oven lamp |
3. |
Thermostat Control Light |
9. |
Oven Fan |
4. |
End of Cooking Programmer |
10.Telescopic runners |
|
5. |
Oven Control Function Knob |
11.Rating Plate |
|
6. |
Mains on light |
|
3 |
Controls
Ovenfunctioncontrolknob(Fig. 1)
The oven function control knob can have the following symbols and functions:
Oven Light - The oven light will be on without any cooking function Conventional cooking - The heat comes
from both the top and bottom element, ensuring even heating inside the oven.
Top heating element - The heat comes from the top of the oven only.
Bottom heating element - The heat comes from the bottom of the oven only.
Inner grill element only - can be used for grilling small quantities.
Double Grill - The full grill element will be on.
Fan cooking - This allows you to roast or
roast and bake simoultaneously using any shelf, without flavour transference.
Defrost Setting - This setting is intended to assist in thawing of frozen food.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures between 50°C and 250°C (MAX).
Oven control light (I)
It will come on every time an heating element is set on operation.
Thermostat control light (°C)
Once the oven temperature has been selected, the temperature light will come on and remain on until the oven has reached the correct setting; after that, it will go on and off with the thermostat, showing how the temperature is being maintained.
Endofcookingprogrammer(Fig.3)
This device allows you to make the oven switch off automatically once the preset time is over. An acousitic signal will be heard when the cooking is completed.The cooking duration can be set up to 90 minutes maximum. Place food in the oven and turn the oven function control knob and the thermostat control knob on the required settings. Turn the timer knob to maximum time position, then turn it back to set the required cooking time. When the cooking time is over, an acoustic alarm will sound and the oven will switch off automatically.
Turn the timer knob on 
to set the oven on manual
operation.
Turn the the oven function and thermostat control knobs to zero.
0
Fig. 1 |
FO 2743 |
|
50 |
|
|
100 |
|
MAX |
|
|
|
|
150 |
200 |
|
|
Fig. 2 FO 2673
5 |
0 |
90 |
|
|
|
15 |
|
75 |
30 |
60 |
|
|
|
45 |
Fig. 3 |
FO 2859 |
|
4
The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Zanussi Service Centre. Under no circumstances should you attempt to repair the appliance yourself.
The cooling fan
The cooling fan is designed to cool the walls of the oven and the components of the oven itself.
The fan switches on automatically after a few minutes of cooking. Warm air is blown out through the aperture near the oven door handle. When the oven is switched off, the fan will remain on in order to cool the oven and kitchen cabinets properly, after which it switches off automatically. NOTE: The fan may run up to 45 minutes after cooking has been completed. Leaving the door ajar will lessen the cooling time.
Fig. 4 |
FO 2259 |
When the oven is first installed
Before cooking for the first time, carefully wash the oven accessories.
)Once the oven has been installed:
a)set the thermostat knob to MAX (230 °C);
b)switch the oven function control knob to conventional
cooking ( );
c)allow the oven to run empty for approximately 45 minutes;
d)open a window for ventilation.
During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.
Repeatthisoperationforthegrillandfancookingfunction. Once this operation is carried out, let the oven cool down, thencleantheovencavitywithasoftclothsoakedinwarm soapy water.
Fig. 5 FO 2161
To open the oven door, always catch the handle in its central part (Fig. 5).
5
Loading...