Zanussi ZOB341N, ZOB341W USER MANUAL
English
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
It is dangerous to alter the specification in any way.
Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
Child Safety
This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
eventual 400V poliphasic connection without earth
wire will destroy the oven and the hob, if fitted.
The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging with
due regard to safety and the environment.
When disposing of an old appliance, make it unusable,
by cutting off the cable.
During use
This appliance has been designed for cooking edible
foodstuff only and MUST NOT be used for any other
purposes.
Ensure that all control knobs are in the OFF position
when not in use.
Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
Always use oven gloves to remove pans from the oven.
For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
Some parts of the appliance are covered by a shock-
proof plastic film. Remove this film before using the
oven.
This appliance is meant to operate with a single-
phased connection to 230V electrical supply. An
It is most important that this instruction book
is be retained with the appliance for future
reference. Should the appliance be sold or
transferred, always ensure that the book is left
with the appliance in order that the new
owner can get to know the functions of the
appliance and the relevant warnings.
Guide to Use the instructions
The following symbols will be found in the text to guide
you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
F
Hints and Tips
Environmental information
This appliance complies with the following
E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336
- 93/68 (General Directives)
and subsequent modifications.
MANUFACTURER: ELECTROLUX ZANUSSI S.p.A.
(Electromagnetical Compatibility Directive);
Viale Bologna, 298
47100 FORLÌ (Italy)
35
Contents
For the User For the Installer
Important Safety Information 35
Description of the Oven 36
Operation 37
When the oven is first installed 37
Cooking with the turnspit 38
Using the oven 38
Cooking Tables 39
Cleaning and maintenance 40
Technical Assistance 41
Something not working... 41
Technical Data 42
Installation 42
OVEN DOOR PROTECTION DEVICE (stainless
steel models) All our appliances comply with the
European Safety Standards. Nevertheless, in order
to ensure the highest safety level, and avoid little
children to be exposed to the heat when the appliance
is operated, it is possible to fit a special protection
device to the oven door. This device can be purchased
in our Service Force Centres, specifying the relevant
code (35791) and the Product No. shown on the
rating plate. Fitting instructions are provided with the
kit package.
Description of the Oven
3
45
2
1
6
7
8
9
1. Control panel
2. Oven function control knob
3. Oven thermostat control knob
4. Oven control light
5. Thermostat control light (°C)
36
6. Grill
7. Oven lamp
8. Turnspit hole
9. Rating plate
Operation
Oven function control knob (Fig. 1)
The oven function control knob can have the following
symbols and functions:
0 OFF position
Conventional cooking - The heat comes from both
the top and bottom element, ensuring even heating
inside the oven.
Bottom heating element - The heat comes from
the bottom of the oven only.
Top heating element - The heat comes from the
top of the oven only.
Grill element- can be used for grilling.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the temperature is being maintained.
Oven control light
It will come on every time an heating element is set on
operation.
0
Fig. 1
FO 2685
50
250
100
200
150
Fig. 2
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
FO 2617
The Cooling Fan for the Controls
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
When the oven is first installed
Before cooking for the first time, carefully wash
the oven accessories.
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to conventional
cooking ( );
c) allow the oven to run empty for approximately 45
minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill. Once this operation is
carried out, let the oven cool down, then clean the oven
cavity with a soft cloth soaked in warm soapy water.
Fig. 3
To open the oven door, always catch the
handle in its central part (Fig. 3).
FO 2161
37
Loading...