Zanussi ZK56-52RF User Manual

2222 047-22
REFRIGERATOR-
FREEZER
ZK 56/52 RF
INS TRUCTION BOOKLET
2
IMPORTANT SAFETY INFORMATION
This information has been provided in the interest of safety. You MUST read it carefully before installing or using the appliance.
Installation
¥ This appliance is heavy. Care should be taken
when moving it.
¥ It is dangerous to alter the specifications or
attempt to modify this product in any way.
¥ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable. Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
¥ Any electrical work required to install this
appliance should be carried out by a qualified electrician or competent person.
¥ Parts which heat up should not be exposed.
Whenever possible, the back of the appliance should be close to a wall but leaving the required distance for ventilation as stated in the installation instructions.
¥ The appliance should be left for 2 hours after
installation before it is turned on, in order to allow the refrigerant to settle.
Child Safety
¥ Do not allow children to tamper with the controls
or play with the product.
¥ Keep all packaging well away from children.
During Use
¥ This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs only.
¥ Frozen food must NOT be re-frozen once it has
thawed out.
¥ Do not place carbonated or fizzy drinks in the
freezer.
¥ Do not remove items from the freezer if your
hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
¥ Ice lollies can cause Ôfrost/freezer burnsÕ if
consumed straight from the freezer.
¥ ManufacturersÕ storage recommendations should
be strictly adhered to. Refer to relevant instructions.
Maintenance and Cleaning
¥ Switch off and unplug the appliance before
carrying out any cleaning or maintenance work.
Servicing
¥ This product should be serviced by an authorised
engineer and only genuine spare parts should be used.
¥ Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Zanussi Service Force Centre and always insist on genuine spare parts.
At the end of the Appliance Life
¥ When disposing of your appliance, use an
authorised disposal site.
¥ Remove the plug and ensure that any locks or
catches are removed, to prevent young children being trapped inside.
3
CONTENTS
2222 047-22
Instructions for the user
Important Safety Information
2
Description of the appliance
4
Operation
5
Before use 5
To start the Appliance 5
Setting the temperature 5
Use of an air circulation slider control 5
Fresh food refrigeration 5
Dual purpose meat box 6
Positioning the door shelves 6
Positioning the inner shelves 6
CrispÕn Fresh 6
Cool Check Guide 7
The freezer compartment 8
Freezing fresh food 8
Frozen food storage 8
Ice cube tray holder 8
Thawing 8
Normal Operating Sounds 9
Health and Safety Guidelines
10
Maintenance and Cleaning
11
Internal cleaning 11
External cleaning 11
When the appliance is not in use 11
Changing the light bulb 11
Automatic Defrosting 11
Cleaning the filter 11
Something not working
12
Service and Spare Parts
13
Customer Care
13
Guarantee Conditions
14
Instructions for the installer
Technical specification
15
Installation
16
Positioning 16
Rear Spacers 16
Electrical Connection
17
Door Reversal
18
DESCRIPTION OF THE APPLIANCE
4
COLDCOLDEST
COOL FLOW SYSTEM
FAST FREEZE
A B
C
D
K
J
H
G
F
E
I
A- Thermostat control
B- Dairy compartment
C- Storage shelf
D- Bottle storage shelf
E- Air circulation slider control
F- Wire shelves
G- Cool Check
H- Glass shelf
I- Salad drawers
J- Freezing fresh food compartment
K- Freezing/Storage compartment
5
OPERATION
Before using
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the appliance is regulated by a thermostat with 6 temperature positions and an ÒOFFÓ (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position.
The intermediate position is usually the most suitable (3-4).
The thermostat control regulates the temperature both within the fridge and the freezer compartment. The thermostat setting can vary as the temperature inside the appliance depends on the following factors:
Ð room temperature
Ð how often the door is opened
Ð how much food is stored
Ð position of the appliance
Fresh food refrigeration
To obtain the best performance, do not store warm food or evaporating liquids in the refrigerator; cover or wrap the food, particularly if it has a strong flavour.
Do not cover the shelves with any protective material, such as paper, cardboard or plastic, which may obstruct the air circulation.
To help you use your refrigerator correctly, here are some more useful hints:
Raw meat (beef, pork, lamb & poultry): wrap in polythene bags and place on the glass shelf above the salad drawers.
Meat can only be stored safely in this way for one or two days at the most.
Fruit & vegetables: these should be thoroughly cleaned and placed in the salad drawers.
Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be stored in the bottle rack on the door.
To Start the Appliance
Allow the appliance to stand for 2 hours after installation.
Plug in the appliance and switch on at the mains supply. Open the fridge door. Turn the thermostat control to a midway setting (3-4) and adjust the slider control to a midway position between ÒcoldÓ and ÒcoldestÓ. Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.
To switch off the appliance turn the thermostat control to position ÒOÓ
Use of an air circulation slider control - COOL FLOW SYSTEM
Your appliance has an air circulation slider control situated at the rear of the fridge compartment, which controls the amount of cold air circulated through the fridge compartment.
When the ambient temperature is between 10¡C and 16¡C, the slider control should be in the ÒcoldÓ position.
When the ambient temperature is above 16¡C the slider control should be midway between ÒcoldÓ and ÒcoldestÓ.
When the ambient temperature is very high (i.e. hot summer days) position the slider control to ÒcoldestÓ.
D757
COLD
COLDEST
COOL FLOW SYSTEM
COLD COLDEST
COOL FLOW SYSTEM
Warning
If using the appliance with the salad drawer removed, please ensure the vent in the back wall of the appliance is not obstructed.
D756
Vent
6
Positioning the inner shelves
The walls of the refrigerator have runners so that shelves can be positioned as desired.
D040
Dual purpose meat box
The meat box can also be used for storing salad.
Positioning the door shelves
The door shelves can be easily removed for cleaning. Gently ease the shelf in the directions shown.
Adjustment of the door shelves can be made to accommodate varying heights of bottles and other containers. Store light items such as small cartons and jars on the door shelves. The bottle shelf can be used for the storage of heavier bottles.
PR260
Use and features of the CRISPÕN FRESH filter
ÒCrispÕn freshÓ is the glass shelf on top of the salad drawers which is fitted with special removable green filters.
These filters allow cool air from the fridge to circulate through the drawers but help prevent moisture loss. By retaining moisture in foods such as fresh fruit, vegetables and salad they are kept fresher for longer.
D749
PR263
Loading...
+ 12 hidden pages