Zanussi ZK47-52RF User Manual

2222 039-32

REFRIGERATOR-

FREEZER

ZK 47/52 RF

INS TRUCTION BOOKLET

2

IMPORTANT SAFETY INFORMATION

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house and
leave the appliance, always ensure that the book is left with the appliance in order that the new owner
can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of safety. You MUST read it carefully before installing
or using the appliance.

Installation

¥ This appliance is heavy. Care should be taken

when moving it.

¥ It is dangerous to alter the specifications or

attempt to modify this product in any way.

¥ Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly
available from the manufacturer or its service
agent.

¥ Any electrical work required to install this

appliance should be carried out by a qualified
electrician or competent person.

¥ Parts which heat up should not be exposed.

Whenever possible, the back of the appliance
should be close to a wall but leaving the required
distance for ventilation as stated in the installation
instructions.

¥ The appliance should be left for 2 hours after

installation before it is turned on, in order to allow
the refrigerant to settle.

Child Safety

¥ Do not allow children to tamper with the controls

or play with the product.

¥ Keep all packaging well away from children.

During Use

¥ This appliance is designed for domestic use only,

specifically for the storage of edible foodstuffs
only.

¥ Frozen food must NOT be re-frozen once it has

thawed out.

¥ Do not place carbonated or fizzy drinks in the

freezer.

¥ Do not remove items from the freezer if your

hands are damp/wet, as this could cause skin
abrasions or frost/freezer burns.

¥ Ice lollies can cause Ôfrost/freezer burnsÕ if

consumed straight from the freezer.

¥ ManufacturersÕ storage recommendations should

be strictly adhered to. Refer to relevant
instructions.

Maintenance and Cleaning

¥ Switch off and unplug the appliance before

carrying out any cleaning or maintenance work.

Servicing

¥ This product should be serviced by an authorised

engineer and only genuine spare parts should be
used.

¥ Under no circumstances should you attempt to

repair the machine yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Refer to your local
Zanussi Service Force Centre and always insist
on genuine spare parts.

At the end of the Appliance
Life

¥ When disposing of your appliance, use an

authorised disposal site.

¥ Remove the plug and ensure that any locks or

catches are removed, to prevent young children
being trapped inside.

3

CONTENTS

2222 039-32

Instructions for the user

Important Safety Information

2

Description of the appliance

4

Operation

5

Before use 5

To start the Appliance 5

Setting the temperature 5

Use of an air circulation slider control 5

Fresh food refrigeration 5

Dual purpose meat box 6

Positioning the door shelves 6

Positioning the inner shelves 6

CrispÕn Fresh 6

Cool Check Guide 7

The freezer compartment 8

Freezing fresh food 8

Frozen food storage 8

Ice cube tray holder 8

Thawing 8

Normal Operating Sounds 9

Health and Safety Guidelines

10

Maintenance and Cleaning

11

Internal cleaning 11

External cleaning 11

When the appliance is not in use 11

Changing the light bulb 11

Automatic Defrosting 11

Cleaning the filter 11

Something not working

12

Service and Spare Parts

13

Customer Care

13

Guarantee Conditions

14

Instructions for the
installer

Technical specification

15

Installation

16

Positioning 16

Rear Spacers 16

Electrical Connection

17

Door Reversal

18

DESCRIPTION OF THE APPLIANCE

4

COLDCOLDEST

FAST FREEZE

COOL FLOW SYSTEM

A
B
C

D

K

J

I

H

F

E

G

A- Thermostat control

B- Dairy compartment

C- Movable shelf

D- Bottle storage shelf

E- Air circulation slider control

F- Wire shelves

G- Cool Check

H- Glass shelf

I- Salad drawers

J- Freezing fresh food compartment

K- Freezing/Storage compartment

5

OPERATION

Before using

Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water).

Do not use soap or detergent as the smell may
linger. Dry thoroughly.

Setting the temperature

The temperature inside the appliance is regulated by
a thermostat with 6 temperature positions and an
ÒOFFÓ (O) position.

Position 1 = minimum coldness

Position 6 = maximum coldness

Turn the thermostat dial to the required position.

The intermediate position is usually the most
suitable (3-4).

The thermostat control regulates the temperature
both within the fridge and the freezer compartment.
The thermostat setting can vary as the temperature
inside the appliance depends on the following
factors:

Ð room temperature

Ð how often the door is opened

Ð how much food is stored

Ð position of the appliance

Fresh food refrigeration

To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; cover
or wrap the food, particularly if it has a strong flavour.

Do not cover the shelves with any protective
material, such as paper, cardboard or plastic, which
may obstruct the air circulation.

To help you use your refrigerator correctly, here are
some more useful hints:

Raw meat (beef, pork, lamb & poultry): wrap in
polythene bags and place on the glass shelf above
the salad drawers.

Meat can only be stored safely in this way for
one or two days at the most.

Fruit & vegetables: these should be thoroughly
cleaned and placed in the salad drawers.

Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.

To Start the Appliance

Allow the appliance to stand for 2 hours after
installation.

Plug in the appliance and switch on at the mains
supply. Open the fridge door. Turn the thermostat
control to a midway setting (3-4) and adjust the slider
control to a midway position between ÒcoldÓ and
ÒcoldestÓ. Leave the appliance for approximately 4
hours for the correct temperature to be reached
before placing food inside.

To switch off the appliance turn the thermostat
control to position ÒOÓ

Use of an air circulation slider
control - COOL FLOW SYSTEM

Your appliance has an air circulation slider control
situated at the rear of the fridge compartment, which
controls the amount of cold air circulated through the
fridge compartment.

When the ambient temperature is between 10¡C and
16¡C, the slider control should be in the ÒcoldÓ
position.

When the ambient temperature is above 16¡C the
slider control should be midway between ÒcoldÓ and
ÒcoldestÓ.

When the ambient temperature is very high (i.e. hot
summer days) position the slider control to ÒcoldestÓ.

D757

COLD

COLDEST

COOL FLOW SYSTEM

COLD COLDEST

COOL FLOW SYSTEM

Warning

If using the appliance with the salad drawer
removed, please ensure the vent in the back wall of
the appliance is not obstructed.

D756

Vent

6

Positioning the inner shelves

The walls of the refrigerator have runners so that
shelves can be positioned as desired.

D040

Dual purpose meat box

The meat box can also be used to store salad.

Positioning the door shelves

The door shelves can be easily removed for
cleaning. Gently ease the shelf in the directions
shown.

The bottle shelf can be used for the storage of
heavier bottles.

PR261

Use and features of the CRISPÕN
FRESH filter

ÒCrispÕn freshÓ is the glass shelf on top of the salad
drawers which is fitted with special removable green
filters.

These filters allow cool air from the fridge to circulate
through the drawers but help prevent moisture loss.
By retaining moisture in foods such as fresh fruit,
vegetables and salad they are kept fresher for
longer.

D749

PR263

7

Cool Check Guide

The guide consists of a temperature sensitive strip
sealed in a shelf trim.

When the fridge is operating at the safe temperature
to store food the guide will appear black. If the
temperature rises above this level the guide will
show the words TOO WARM.

Positioning of the Cool Check

The shelf with the cool check temperature guide
must be placed in the fridge according to the
instructions located on the fridge wall and always
ensure the guide is at the front.

If the Cool Check shows TOO WARM

In certain conditions the temperature guide may
show TOO WARM if:

¥ The fridge is switched off

¥ The door has been recently opened

¥ A quantity of warmer food has been introduced

into the fridge

¥ The fridge temperature is above the

recommended maximum for the safer storage of
food.

The cool check will change to show ÒTOO WARMÒ
very quickly after the door has been opened. It will
however take a number of hours to return to black,
indicating that the temperature is correct.

The appliance should be left overnight and the cool
check examined in the morning. If the cool check
shows TOO WARM, turn the appliance to a colder
setting leave overnight and examine again the
following morning.

Hints and Tips

¥ The guide is only suitable for use in the model

supplied.

¥ The guide will not operate in the freezer

compartment.

¥ When cleaning the shelf take care not to immerse

in water, and wipe away any spills.

TOO WARM

CCOO2

ZANUSSI

8

The freezer compartment

The four-star freezer compartment is suitable for
storage of commercially frozen food and for freezing
fresh foods.

Freezing fresh food

When freezing fresh foods set the slider control to
the ÒcoldÓ position and turn the thermostat control to
a higher setting.

In any 24 hours you can freeze up to 6 kg.

Place food to be frozen in the upper drawer of the
freezer as this is the coldest part.

After 24 hours reposition the slider control and
thermostat control to previous setting.

I mportant

To ensure correct operation of the appliance do not
use the appliance with the basket or drawers
removed.

Thawing

Frozen food can be thawed in the fridge or at room
temperature depending on the time available. Small
food items may even be cooked from frozen; in this
case cooking will take longer.

Any frozen food which is allowed to thaw
accidentally should either be eaten as soon as
possible or thrown away. Alternatively, if the food is
uncooked and has not been completely defrosted it
can be cooked and then refrozen.

Meat, fish and fruit should be thawed in the
refrigerator compartment and small pieces of meat
can even be cooked while still frozen, but you must
ensure that it is thoroughly cooked through.

Vegetables should be directly immersed in boiling
water; ready-cooked dishes can be placed directly in
the oven in their aluminium wrapping.

A microwave oven is particularly suitable for thawing
frozen food: follow the oven instructions, particularly
regarding the placement of aluminium wrapping or
containers in the oven.

Defrosted cooked food must never be refrozen.

Frozen food storage

Frozen food can be stored in any basket or drawer of
the freezer compartment, including the fast freeze
compartment.

Do not exceed the storage period indicated by the
manufacturer.

Do not open the door frequently or leave it open
longer than is absolutely necessary.

Warning

Do not put carbonated liquids, (fizzy drinks etc.), in
the freezer compartment.

Ices Iollies, if consumed immediately after removal
from the freezer, can cause low temperature skin
burns.

Do not remove items from the freezer if your hands
are damp/wet, as this could cause skin abrasions or
Òfrost/freezer burnsÓ.

Important

In the event of a power failure - DO NOT OPEN
THE DOOR, the food in the freezer will not be
affected if the power cut is short and the freezer
is full.
If the temperature in the freezer rises, and the
food begins to thaw, do not re-freeze the food
without checking its condition.
The following guidelines should assist you.
Ice-cream: once thawed should be discarded.
Fruits & Vegetables: if soft should be cooked and

used up.

Breads & Cakes: can be re-frozen without danger.
Shellfish: should be refrigerated and used up

quickly.
Cooked Dishes: i.e. casseroles should be
refrigerated and used up.
Large Pieces of Meat: can be re-frozen providing
there are still ice crystals remaining within them.
Small Joints: should be cooked and can then be re­frozen as cooked dishes.
Chicken: should also be cooked and re-frozen as a
cooked dish.

Ice cube tray holder

The holder is designed to hold the two ice cube trays
supplied and it is recommended that these are used.
The holder can be located onto the front of any of
the baskets.

To make ice cubes:

Fill the trays 3/4 full to allow the ice to expand and
place in the ice cube tray holder.

To turn out the ice cubes simply give the tray a slight
twist to release the cubes.

D755

9

Normal Operating Sounds

The advanced design of todayÕs frost free appliances mean you hear unfamilar noises during everyday
operation. The diagram below describes some of the noises you may hear. These are quite normal and mean
your appliance is operating correctly

The thermostat control will
click when starting or
stopping the compressor.

Defrost water drips into the
drain pan during the defrost
cycle.

The automatic defrost timer
sounds like an electric clock
and clicks in and out of the
defrost cycle.

The fan circulates cold air to
cool the refrigerator and the
freezer compartment and
sounds like air blowing or a
whirring sound.

The flow of refrigerant
through the freezer cooling
coil makes a gurgling noise.

Water dropping on the defrost
heater causes a hissing or
popping sound during the
defrost cycle.

The compressor will make a
humming or pulsating sound
while
operating.

10

Because of consumer demand, preservatives
have been removed from many pre-prepared
foods. This together with the changes in
shopping habits to a once-a-week shop, mean
that safe handling and storage of food is even
more important than ever.

The following tips should help you to ensure that
the food in your home is in as perfect condition
as possible.

¥ Keep the time between buying chilled food and

placing it in your fridge as short as possible. Tests
showed that the temperature of 1 litre of orange
juice rose to 22¡C in an hour between the
supermarket and home. It then took 11 hours to
get down to 7¡C in the refrigerator.

¥ Keep the refrigerator door closed as much as

possible.

¥ Do not push food together too much, try to allow

air to circulate around each item.

¥ Cool cooked food as quickly as possible but do

NOT place in the refrigerator until cool. (Leave
food in a cool place in order that it can then be
put in the refrigerator as soon as possible).

¥ Do NOT mix raw and cooked meat, they must be

in separate containers. Take care not to let the
meat juices drip onto other food. If the meat does
drip, remove everything and clean thoroughly.

¥ Do not store food uncovered.

¥ The best way to defrost food is to put it in the

refrigerator to thaw slowly.

¥ Remove suspect food from your refrigerator and

clean (refer to ÒMaintenance and Cleaning).

¥ Never allow spillages to dry and harden.

¥ Ensure that food placed in the freezer is dated

and labelled and used in date order to ensure
that food is consumed at its best.

¥ It is important that food is used before its Òbest

beforeÓ date.

¥ Store eggs in the egg rack provided in the

refrigerator door. Discard any broken or chipped
eggs.

¥ Regularly check the refrigerator door seal to

ensure that it is clean and free from debris.

¥ Always wash your hands with soapy water and

dry them with a clean towel before handling food.

¥ Keep work surfaces clean and avoid cross

contamination by not using the same work
surface or knife, without washing them thoroughly
in between.

¥ The fresh foods to be frozen must be fresh and of

the best quality.

¥ The size of each pack should be small enough to

ensure that it is used in one go . Small packs
freeze more quickly and uniformly and give better
results.

¥ Frozen food, once thawed, must not be refrozen.

Lean food keeps better and longer than fatty
food, salt reduces the storage time.

¥ Wrap the food in polythene or aluminium freezing

bags or foil so that they adhere to the food and
provide an airlight seal .

¥ Packaging which is swollen or has traces of

refrozen water droplets on the pack could
indicate that the product has not been kept at a
suitable temperature and that it may have lost its
original quality. Partially thawed food must not be
refrozen, it must be consumed within 24 hours.
Never exceed the storage times indicated.

¥ Never place hot food, bottles or cans of fizzy

drink in the freezer as they may explode.
Containers with a lid must not be filled to the
brim.

¥ Do not open the door or place extra fresh food in

the freezer next to food which is already frozen
as this could cause the temperature of the frozen
food to rise and its quality and storage life to
reduce .

HEALTH AND SAFETY GUIDELINES

11

MAINTENANCE AND CLEANING

External cleaning

Wash the outer cabinet with warm soapy water. Do
NOT use abrasive products.

An accumulation of dust will affect the performance
of the appliance and cause excessive electricity
consumption.

Once or twice a year dust the condenser (black grill)
and the compressor at the back of the appliance,
with a brush or vacuum cleaner, see figure.

D273

CONDENSER

COMPRESSOR

DEFROST
TRAY

Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the
ELECTRICITY supply.

Internal cleaning

Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE
POWDERS, HIGHLY PERFUMED
CLEANING PRODUCTS OR WAX
POLISHES, TO CLEAN THE INTERIOR AS
THESE WILL DAMAGE THE SURFACE AND
LEAVE A STRONG ODOUR.

Changing the light bulb

Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply, then replace the bulb as follows;

Unscrew the light cover and then pull it outward by
pressing as shown in the figure. Unscrew the bulb
and replace it with a new 15 watt bulb (available
from your nearest Service Force Centre).

Replace the light cover by sliding it into its original
position and replace the security screw.

D411

When the appliance is not in use

When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the doors ajar
to prevent unpleasant smells.

Automatic Defrosting

Your appliance has been designed to be frost free.
This means there is no need to defrost your
appliance as this will be carried out automatically.

Cleaning the filter

The filter is held by two small support frames which
press into position and are therefore easily removed
for cleaning. To do this, turn the glass shelf upside
down and release the frames as shown in figure.
The filters and the glass cover can be washed gently
in warm soapy water, they should not be put in the
dishwasher.

Replacement filters can be purchased as a spare
part from your local Zanussi Service Centre.

D711

12

SOMETHING NOT WORKING

Symptom

No power to the appliance

The light does not come on

The temperature in the fridge or freezer section is
too high

The freezer door will not open

The compressor runs continously

Noise

Solution

Check there is power at the socket.

Check there is not a power cut by checking the
household lights.

Check the fuse has not blown.

Ensure that the bulb is correctly fitted.

Replace the bulb if it has blown.

Check the door light switch is not jammed.

Check the thermostat in the fridge is turned to the
correct setting relative to ambient conditions.

Check the ambient temperature is within the
applianceÕs operating limits of 10¡C to 32¡C.
Relocate the appliance if necessary.

Has door just been opened? If so leave for a few
minutes to allow the air pressure to equalise.

Adjust the thermostat to give correct temperature
control. See ÒSetting the temperatureÓ.

Check that the doors are closed.

Large quantities of food have recently been placed in
the cabinet/and or door is frequently opened.

Check that air vents are not obstructed.

Refer to normal operating sounds.

Before contacting your local Service Force Centre, check the following points:
Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or

installation a charge will be made, even if the appliance is under guarantee.

If, after the above checks, there is still a fault, call your local Service Force Centre.

Please note that proof of purchase is required for any in-guarantee service calls.

13

SERVICE AND SPARE PARTS

CUSTOMER CARE DEPARTMENT

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:-

0 8 7 0 5 9 2 9 9 2 9

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For further details please see the accompanying Customer Care Booklet.

For service in the Republic of Ireland contact

Zanussi

Long Mile Road

Dublin 12

Telephone : [phone]

Before calling out an engineer, please ensure you have read the details under the heading ÔSomething Not
Working?

When you contact the Service Force Centre you will need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance (found on the rating plate)

5. The purchase date

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please
contact our Customer Care Department by letter or telephone as follows:-

Customer Care Department

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel: [phone]

14

Standard guarantee conditions

We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair
or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:

The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.

The appliance has been used for normal domestic purposes only, and in accordance with the manufacturerÕs
instructions.

The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.

All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or
defective part replaced shall become the CompanyÕs property.

This guarantee is in addition to your statutory and other legal rights.

Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.

Exclusions

This guarantee does not cover:

Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.

Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the
European Community (EC) or European Free Trade Area.

Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.

Products of Zanussi manufacture which are not marketed by Zanussi.

European Guarantee

If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:

The guarantee starts from the date you first purchased your product.

The guarantee is for the same period and to the same extent for labour and parts as exists in the new country
of use for this brand or range of products.

This guarantee relates to you and cannot be transferred to another user.

Your new home is within the European Community (EC) or European Free Trade Area.

The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.

The product is installed taking into account regulations in your new country.

Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home. They will then ensure that the local Service Organisation is aware of your move and able to look
after you and your appliances.

France Senlis [phone]

Germany NŸrnberg [phone]

Italy Pordenone [phone]

Sweden Stockholm [phone]

UK Slough [phone]

GUARANTEE CONDITIONS

15

TECHNICAL SPECIFICATIONS

DIMENSIONS

Height 170 cm

Width 54.5 cm

Depth 60 cm

POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz

TOTAL POWER ABSORBED 150 W

AVERAGE DAILY UNITS ELECTRICITY * 1.5 kWh

GROSS CAPACITY

Fridge 135 l

Freezer 121 l

NET CAPACITY

Fridge 134 l

Freezer 90 l

* This figure is based on standard test results in accordance with European Standard EN 153.

Actual consumption will depend on how the appliance is used and where it is located.

16

INSTALLATION

Positioning

This appliance is designed to operate in ambient
temperatures between 10¡C (50¡F) and 32¡C (90¡F).
It should be located in a dry atmosphere, out of
direct sunlight and away from extreme temperature
e.g. not next to a boiler or radiator, or in a very cold
room e.g. an outhouse, where the temperatures may
fall below 10¡C (50¡F). If these temperatures are
exceeded i.e. colder or warmer, then the appliance
may not operate correctly.

You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
must also be at least 100 mm (4Ó) distance between
the top of the cabinet and any overhanging kitchen
furniture (A). Ideally, the appliance should not be
positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of
the appliance. Do not obstruct the space
underneath.

Rear spacers

In the bag with the documentation, there are two
spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.

DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.

D200

NP002

100 mm10 mm

10 mm

A

B

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE
THAT HAS A LOCK OR CATCH ON THE DOOR,
YOU MUST ENSURE THAT IT IS MADE
UNUSABLE TO PREVENT YOUNG CHILDREN
BEING TRAPPED INSIDE.

Depending upon the position which you choose for
your appliance, you may wish to reverse the way in
which the door opens. To do this, refer to instructions
on ÒDoor reversal directionsÓ paragraph.

PR107

17

Electrical connections

Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.

WARNING: THIS APPLIANCE MUST BE
EARTHED.

The manufacturer declines any liability should
this safety measure not be observed.

If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and
the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to
prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of your
home.

Important

The wires in the mains lead are coloured in
accordance with the following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not
correspond with the markings identifying the
terminals in your plug, proceed as follows:

Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter

ÇEÈ or the earth symbol or coloured green and
yellow.

Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter ÇNÈ or coloured
black.

Connect the brown (live) wire to the terminal in the
plug which is marked with the letter ÇLÈ or coloured
red.

The plug moulded onto the lead incorporates a fuse.

D207

GREEN & YELLOW

13 AMP. FUSE

BROWN

CORD CLAMP

BLUE

13 AMP

For replacement, use a 13amp BSI362 fuse. Only
ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.

A replacement cover/carrier must be obtained from
your local Zanussi Service Force Centre whose
address is listed in the Customer Care Booklet which
accompanies your instruction manual.

This appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interference
suppression.

This appliance complies with the following
E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive)

and subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent
modifications.

Please ensure that when the appliance is
installed it is easily accessible for the engineer in
the event of a breakdown.

18

Door reversal directions

1. Disconnect from the electricity supply.

2. Remove all loose items, including food, store
food in a cool place.

3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing.

4. Remove the feet (B).

5. Remove bottom hinge (A).

6. Remove the freezer door by releasing it from the
middle hinge (H).

7. Unscrew the middle hinge.

8. Slide out the fridge door from pin (G), unscrew
pin (G) and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs (I) which should then be
fitted on the opposite side.

9. Remove the plastic blanking screws from the left
hand hinge position, refit to the right hand hinge
position.

10 Refit the fridge door and replace the middle hinge

to the left hand side.

11.Replace the door and bottom hinge (A) on the
opposite side.

12.Refit the feet (B).

Attention

After reversing the door check that the gasket is
sealing correctly to the cabinet. If the gasket is not
sealing correctly, apply warm air to the non-sealing
area using a hair dryer set to gentle heat.

This will make the rubber more supple and allow it to
revert to its original shape and seal correctly.

D715

A

B

B

I

I

I

G

H