Zanussi ZGG649ICA, ZGG649ICY User Manual

GAS HOB

ZGG 649

INSTRUCTION BOOKLET

2

Important Safety Information

You MUST read these warnings carefully before installing or using the appliance.

Installation

●This appliance must be installed by qualified personnel, according to the manufacturer ’s instructions and to the rules in force.

●Remove all packaging before using the appliance.

●Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe.

●Do not attempt to modify the appliance in any way.

Child Safety

●This appliance is designed to be operated by adults. Do not allow children to play near or with the appliance.

●The appliance gets hot when it is in use. Children should be kept away until it has cooled.

●Children can also injure themselves by pulling pans or pots off the hob.

During Use

●This appliance is intended for domestic cooking only. It is not designed for commercial or industrial purposes.

●When in use a gas cooking appliance will produce heat and moisture in the room in which it has been installed. Ensure there is a continuous air supply, keeping air vents in good condition or installing a cooker hood with a venting hose.

●When using the hob for a long period time, the ventilation should be improved, by opening a window or increasing the extractor speed.

●Do not use this appliance if it is in contact with water. Do not operate the appliance with wet hands.

●Ensure the control knobs are in the ‘OFF’ position when not in use.

●When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance.

●Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage.

●Never leave the hob unattended when cooking with oil and fats.

●Never use plastic or aluminium foil dishes on the hob.

●Perishable food, plastic items and areosols may be affected by heat and should not be stored above or below the hob unit.

Service

●This appliance should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.

Environmental Information

●After installation, please dispose of the packaging with due regard to safety and the environment.

●When disposing of an old appliance, make it unusable, by cutting off the cable.

Keep this instruction book for future reference and ensure it is passed on to any new owner.

3

Contents

For the User

Description
of the Appliance	Page	5
Operation	Page	6
Maintenance
and Cleaning	Page	7
Something Not
Working?	Page	8

For the Installer

Technical Data	Page 9
Installation	Page 10
Gas Connection	Page 10
Building In	Page 11
Fitting the Hob
to the Worktop	Page 12
Electrical Connection	Page 13
Commissioning	Page 14
Servicing	Page 15

Technical Maintenance Page 15

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

i

Step by step instructions for an operation

Hints and Tips

4

Description of the Appliance

	3
	5
1	6
	7
	8

4

2

1.Hob Top

2.Rapid Burner

3.Semi-rapid Burners

4.Auxiliary Burner

5.Control knob for back right burner (semi-rapid)

6.Control knob for back left burner (semi-rapid)

7.Control knob for front left burner (rapid)

8.Control knob for front right burner (auxiliary)

INSTALLATION

Any gas installation must be carried out by

qualified personnel, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

5

Operation

	i	This hob is provided with a safety device,
		which will stop the gas flow if the flame
		accidentally goes off during cooking.

To light a burner, turn the relevant control knob anticlockwise to maximum position and push it down to ignite. Keep the control knob pressed down for about 5 seconds, to allow the safety device to be switched off. Then adjust the flame as required.

If the burner does not ignite, turn the control knob to zero, and try again.

When switching on the mains, after

i installation or a power cut, it is quite normal for the spark generator to be activated automatically.

To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table).

Burner	minimum	maximum
	diameter	diameter
Large (rapid)	160 mm.	240 mm.
Medium (semi-rapid)	120 mm.	220 mm.
Small (Auxiliary)	80 mm.	160 mm.

If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat.

As soon as a liquid starts boiling, turn down i the flame so that it will barely keep the

liquid simmering.

Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

If the control knobs become difficult to turn, please contact your local Service Centre.

6