Zanussi ZGF759ICX User Manual

GAS HOB

MODEL ZGF 759

INSTRUCTION BOOKLET

Important Safety Information

You MUST read these warnings carefully before installing or using the

appliance.

Installation

● This appliance must be installed by qualified

personnel, according to the manufacturer’s

instructions and to the rules in force.

● Remove all packaging before using the appliance.

● Ensure that the gas and electrical supply complies

with the type stated on the rating plate, located near

the gas supply pipe.

● Do not attempt to modify the appliance in any way .

Child Safety

● This appliance is designed to be operated by adults.

Do not allow children to play near or with the

appliance.

● The appliance gets hot when it is in use. Children

should be kept away until it has cooled.

● Children can also injure themselves by pulling pans

or pots off the hob.

During Use

● This appliance is intended for domestic cooking only .

It is not designed for commercial or industrial

purposes.

● When in use a gas cooking appliance will produce

heat and moisture in the room in which it has been

installed. Ensure there is a continuous air supply,

keeping air vents in good condition or installing a

cooker hood with a venting hose.

● When using the hob for a long period time, the

ventilation should be improved, by opening a

window or increasing the extractor speed.

● Do not use this appliance if it is in contact with water.

Do not operate the appliance with wet hands.

● Ensure the control knobs are in the ‘OFF’ position

when not in use.

● When using other electrical appliances, ensure the

cable does not come into contact with the hot

surfaces of the cooking appliance.

● Unstable or misshapen pans should not be used on

the hob as unstable pans can cause an accident by

tipping or spillage.

● Never leave the hob unattended when cooking with

oil and fats.

● Never use plastic or aluminium foil dishes on the

hob.

● Perishable food, plastic items and areosols may be

affected by heat and should not be stored above or

below the hob unit.

Service

● This appliance should only be repaired or serviced

by an authorised Service Engineer and only genui-

ne approved spare parts should be used.

Environmental Information

● After installation, please dispose of the packaging

with due regard to safety and the environment.

● When disposing of an old appliance, make it

unusable, by cutting off the cable.

Keep this instruction book for future

reference and ensure it is passed on

to any new owner.

For the User

Description

of the Hob Page 5

Operation Page 6

Maintenance

and Cleaning Page 7

Something

Not Working Page 8

Contents

For the Installer

Technical Data Page 9

Installation Page 10

Gas Connection Page 10

Building In Page 11

Fitting the Hob

to the Worktop Page 12

Electrical Connection Page 13

Commissioning Page 14

Servicing Page 15

Technical Maintenance Page 15

Guide to Use the instructions

The following symbols will be found in the text to

guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an

operation

Hints and Tips

☞

1. Hob Top

2. Auxiliary Burner

3. Semi-rapid Burners

4. Rapid Burner

5. Ignition pushbutton

6. Control knob for front left burner (auxiliary)

7. Control knob for back left buner (semi-rapid)

8. Control knob for central burner (rapid)

9. Control knob for back right burner (semi-rapid)

10. Control knob for front right burner (rapid)

Description of the Hob

INSTALLATION

Any gas installation must be carried out by

qualified personnel, and in accordance with

existing rules and regulations.

The relevant instructions are to be found in the

second section of this manual.

Please, ensure that, once the appliance is

installed, it is easily accessible for the

engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is

important to remove any protective

materials, which were put on in the factory.

Operation

To light a burner, turn the relevant control knob

anticlockwise to maximum position and push it down

to ignite. Keep the control knob pressed down for

about 5 seconds, to allow the safety device to be

switched off. Then adjust the flame as required.

If the burner does not ignite, turn the control knob to

zero, and try again.

When switching on the mains, after

installation or a power cut, it is quite normal

for the spark generator to be activated

automatically.

To ensure maximum burner efficiency, you should

only use pots and pans with a flat bottom fitting the

size of the burner used (see table).

If you use a saucepan which is smaller than

the recommended size, the flame will spread

beyond the bottom of the vessel, causing the

handle to overheat.

As soon as a liquid starts boiling, turn down

the flame so that it will barely keep the

liquid simmering.

Take care when frying food in hot oil or fat,

as the overheated splashes could easily

ignite.

If the control knobs become difficult to turn,

please contact your local Service Centre.

Burner minimum maximum

diameter diameter

Large (rapid) 160 mm. 240 mm.

Medium (semi-rapid) 120 mm. 220 mm.

Small (Auxiliary) 80 mm. 160 mm.

This hob is provided with a safety device,

which will stop the gas flow if the flame

accidentally goes off during cooking.

+ 9 hidden pages