Zanussi ZGF 648 USER MANUAL

GAS HOB
A«OBA
BAPOHA
œOBEPXHOCT‹
ZGF 643 ZGF 648
INSTRUCTION BOOKLET
P”OBOƒCTBO œO ›CœÀ”ATA÷»»
RU
ENGLISH
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
During Operation
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
This appliance has been designed for non professional purpose in private houses only. It is meant to cook edible foodstuff only and MUST NOT be used for any other purposes.
It is dangerous to alter the specification in any way.
For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Zanussi Service Centre. Always insist on genuine Zanussi spare parts.
Ensure that all control knobs are in the OFF position when not in use.
Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance.
If the appliance is out of order, disconnect it from the electric supply.
Child Safety
Ensure that the gas supply complies with the gas type stated on the identification label, placed near the gas supply pipe.
Using a gas cooking appliance will produce heat
and moisture in the room which it has been installed in. Ensure a continuous air supply, keeping the air vents in good conditions or installing a cooker hood with discharge tube.
In case of intensive or long time use of the appliance, make the ventilation more efficient, by opening a window or increasing the electric exhaust fan power.
Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.
The manufacturer disclaims any responsability should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable.
This appliance has been designed to be operated by adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or
play near or with the oven.
Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled.
About Installation, Cleaning and Manteinance
It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations.
Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This appliance complies with the following E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336
- 93/68 (General Directives)
and subsequent modifications.
(Electromagnetical Compatibility Directive);
Contents
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
For the User
Important Safety Information 3
Instruction for the User 4
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Cleaning and Maintenance 5
Environmental information
For the Installer
Technical Data 7
Electrical Connection 8
Adaptation to different types of gas 9
Building In 10
These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book.
MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna 298 - 47100 FORLI’ (Italy)
Instruction for the User
Hob burners control knobs
Using the hob correctly
The hob burners control knobs are situated on the hob front panel. The symbols on the knobs mean that :
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a pan on the pan support.
Mod. ZGF 648
Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position.
Mod. ZGF 643
After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 1 lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.
Then, check the flame is regular and adjust it as required. If you cannot light the flame even after several attempts, check the "cap" (Fig. 1 lett. A) and the "crown" (Fig. 1 lett. B) are in the correct position. To put the flame out, turn the knob to the symbol •.
Always turn the flame down or put it out before taking the pans off the burner.
To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside). It is also advisable, as soon as a liquid starts boiling, to turn down the flame so that it will barely keep the liquid simmering.
Use only pans or pots with flat bottom.
Carefully supervise cookings with fats or oil, since these types of foodstuff can result in a fire, if over-heated.
Fig. 1
Burner minimum maximum
FO 0204
diameter diameter
Big (rapid) 180 mm. 260 mm. Medium (semirapid) 120 mm. 220 mm. Small (Auxiliary) 80 mm. 160 mm.
Loading...
+ 7 hidden pages