Zanussi ZDI6052W, ZDI6052X User Manual

DISHWASHER

ZDI 6052

Instruction book

en

Contents

	Important safety information	3	Installation instructions	14
	Description of the appliance	4	Water supply connections	14
			Water outlet hose connection	14
	The control panel	4
			Electrical connection	15
	Before use	5	Hints for test centres	15
	Setting the water softener	5
	Filling with salt	5
	Rinse aid	6
	Use of detergent	6
	Using your appliance	7
	Loading your appliance	7
	The lower basket	7
	The cutlery basket	7
	The upper basket	7
	Adjusting the height of the upper basket	7
	Hints and tips	8
	Washing programmes	9
	Operating sequence	10
	Maintenance and cleaning	11
	Internal cleaning	11
	Cleaning the filters	11
	External cleaning	11
	Prolonged periods of non-operation	11
	Frost precautions	11
	Moving the machine	11
	Something not working	12
	Service and spare parts	12
	Protection against fooding	13

Technical specifications

Dimensions	Width	59.6 cm
	Height with worktop	81.8 - 87.8 cm
	Max depth	57.5 cm
	Max depth with open door	111.4 cm
Electrical connection	Voltage	230 V - 50 Hz
Motor rating during wash		200 W
Power of heating element		2100 W
Overall power		2300 W
Water supply pressure	Minimum	50 kPa (0.5 bar)
	Maximum	800 kPa (8 bar)
Capacity		12 place settings

This appliance complies with the following E.E.C. Directives:

-73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

2

Important safety information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

Installation

●This appliance is heavy. Care should be taken when moving it.

●It is dangerous to alter the specifications or attempt to modify this product in any way.

●Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Child Safety

●This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●Keep all packaging well away from children.

●Keep all detergents in a safe place out of children's reach.

During Use

●Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

●Under no circumstances should you open the door whilst the appliance is in operation. Always turn off the appliance before opening the door.

●Only use detergent specifically designed for use in dishwashers.

●Long bladed knives stored in an upright position are a potential hazard.

●Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.

●When finishing loading or unloading close the door, as an open door can be a hazard.

●Do not sit or stand on the open door.

●Isolate the appliance from the power supply and turn off the water supply after use.

●Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken.

●This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.

●Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning.

Contact your local Service Force Centre. Always insist on genuine spare parts.

Conservation

In the interest of the environment:

● Materials marked with the symbol

are recyclable.

●Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.

●Help to keep your country tidy - use authorised disposal sites for your old appliance.

3

Description of the appliance

1.Water hardness adjustment

2.Levelling spacers

3.Upper basket stop

4.Salt container

5.Lower spray arm

6.Detergent dispenser

7.Control panel

8.Rating plate

9.Rinse aid dispenser

10.Large filter

11.Central filter

12.Upper spray arm

13.Upper basket

IN80

The control panel

1.On/Off indicator light

2.On/Off push button

3.Programme guide

4.Door handle

5.Programme marker

6.Programme selector dial

4

Before use

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with salt

5.Fill the rinse aid dispenser

6.Run a Rinse and Hold programme.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees, French degrees and PPM (parts per Million).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 2.

If this level is not suitable for your area the softener should be adjusted.

				Water hardness
Level		German			French		PPM		Use of
		degrees			degrees		(Parts per		salt
		(dH°)			(°TH)		Million)
0			0 - 4		0 - 8		0 - 80		NO
1	5		- 11		9 - 20		81 - 200		YES
2	12 - 22				21	- 40	201	- 400	YES
3	23		- 34		41	- 60	401	- 600	YES
4	35		- 45		61	- 80	601	- 800	YES
5	46		- 50		81 - 90		801 - 900		YES

If your water is level 0 it is already soft and therefore there is no need to use salt.

Adjust the water softener on level 1 without using salt. In this case the salt indicator light on the control panel will always remain illuminated when the machine is switched

on.

To adjust the water softener

With a screwdriver turn the selector on the upper front corner of the machine until the level required corresponds with the marker.

3	4
22	5
	1

AA05

Filling with salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the washing programmes.

This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt container.
2.	Pour 1 litre of water inside the container (this is necessary
	only before filling with salt for the first time).
3.	Using the funnel provided,
	pour in the salt until the
	container is full.
	Do not worry if water over
	flows from the unit when	SALET
	filling with salt, this is quite	SAL
		SALZ
	normal.	SEL
4. Replace the cap making
	sure that there is no trace
	of salt on the screw thread
	or on the gasket.
5. Screw on the cap tightly.		SR06

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on.

If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

5