Zanussi ZDC 5375 W User Manual

TUMBLE DRYER

Start/
Pause

ZDC 5375W

Door Spin Option Change Exit

TIMELINE

AUTOREVERSE 6 kg

Ready to wear

Iron dry

Slightly damp

Store dry

Machine iron dry

Store dry

Iron dry

Memory

1

Memory

2

Reset/

Off

60 min

30 min

Cooling

ZDC 5375 W

125981241

Unpacking: see page 23

INSTRUCTION BOOKLET

GB

Important Safety Information

It is most important that this instruction book should be retained with the appliance for
future reference. Should the appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure that the book is supplied with the
appliance in order that the new owner can get to know the functioning of the appliance
and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.

Installation

• This appliance is heavy. Care should be taken when

moving it.

• It is dangerous to alter the specifications or attempt

to modify this product in any way.

• Any electrical work required to install this

appliance should be carried out by a qualified
electrician or competent person.

•

Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.

• If the machine is situated on a carpeted floor,

please adjust the feet in order to allow air to
circulate freely.

• If the tumble dryer is placed on top of a washing

machine, it is compulsory to use the stacking kit
(available as an accessory).

Child Safety

• This appliance is designed to be operated by adults.

Children should not be allowed to tamper with the
controls or play with the product.

• Pets and children have been known to climb into

tumble dryers. Please check your drum before use.
Keep all packaging well away for children.

•

Use

• Do not overload the appliance (see programme

chart).

• Clothes which are dripping wet should not be

placed in the dryer.

• As some bulky items such as duvets and

eiderdowns should be dried in large commercial
machines because of their bulk, check with the
manufacturer of the item if it is suitable for drying
in a domestic machine, even if the dry weight of
the item is within the limit advised.

• Please make sure that no gas lighters or matches

have accidentally been left in pockets of garments
to be loaded into appliance.

• Danger of explosion: Never tumble dry items that

have been in contact with inflammable solvents
(petrol, methylated spirits, dry cleaning fluid and
the like). As these substance are volatile, they
could cause an explosion. Only tumble dry items
washed with water.

• Risk of fire: items that have been spotted or soaked

with vegetable or cooking oil constitute a fire
hazard and should not be placed in the tumble
dryer.

• If you have washed your laundry with stain

remover you must execute an extra rinse cycle
before loading your tumble dryer.

• In order to avoid danger of fires caused by

excessive drying, do not use appliance to dry the
following items:

Cushions, quilts and the like (these items
accumulate heat).
Items containing rubber foam or materials similar
to rubber foam.

• Leave the door slightly ajar when the appliance is

not being used. This will allow the seal to be
preserved.

• Clean fluff filters after using tumble dryer. To

prevent fire risks, do not use the appliance if the
fluff filters are damaged.

• Do not allow fluff to accumulate around the dryer.

• Under no circumstances should you attempt to

repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine Zanussi­Electrolux spare parts.

2

Contents

For the User

Important Safety Information

• Installation

• Child Safety

• Use

Your New Tumble Dryer
Description of the Appliance
The Control Panel

• Programme/Time Selector Dial 5

• Display 5

• Door Release Button 5-6

• Spin Speed Button 6

• Option, Change, Exit Button 6-9

• Start/Pause Button 10

Programme Chart
Operating Sequence
Hints & Tips on Drying

11

12-14

15

Something Not Working

2

4
4
5

Service and Spare Parts
Customer Care
Guarantee Conditions

For the Installer

Installation Instructions

Technical Specifications

Adjusting the Level of Conductivity

18
19
19
20

21
21
22

• Unpacking 23

• Positioning 23

• Stacking kit (optional accessory) 23

• Door reversal 23

• Electrical connection 23-24

Maintenance and Cleaning

16

• External cleaning 16

• Cleaning the door 16

• Cleaning the filters 16

• Cleaning the condenser unit 16-17

• Emptying the water reservoir 17

• Cleaning the drum 17

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions
Hints and tips
Environmental information

3

1

2

5

6

3

4

3

C

o

t

t

o

n

e

x

t

r

a

d

r

y

R

e

a

d

y

t

o

w

e

a

r

I

r

o

n

d

r

y

S

l

i

g

h

t

l

y

d

a

m

p

S

t

o

r

e

d

r

y

M

a

c

h

i

n

e

i

r

o

n

d

r

y

S

t

o

r

e

d

r

y

S

y

n

t

h

e

ti

c

e

x

t

r

a

d

r

y

I

r

o

n

d

r

y

B

a

b

y

M

e

m

o

r

y

1

M

e

m

o

r

y

2

R

e

s

e

t

/
O

f

f

S

t

a

r

t

/

P

a

u

s

e

ZD

C

53

5

5W

D

o

o

r

S

p

i

n

O

p

t

i

o

n

C

h

a

n

g

e

E

x

i

t

6

0

m

i

n

3

0

m

i

n

C

o

o

l

i

n

g

T

I

M

E

L

I

N

E

A

U

T

O

R

E

V

E

R

S

E

6

k

g

Your New Tumble Dryer

This tumble dryer will give your wash that soft, relaxed feel whatever the weather.
Extremely high quality standards both during development and

manufacturing guarantee a long service life for your appliance.
Maximum economy in the operation of your dryer is achieved through

very economical electricity consumption and short drying times.

Energy saving tips

To save energy we recommend that you follow these
hints:

• Try to load the maximum capacity of the machine

as small loads are uneconomical.

• Always load well spun laundry. The higher the spin

speed, the lower the electricity consumption and
the shorter the drying times.

• Do not over-dry laundry, this avoids creasing and

saves energy.

• Clean the filters regularly to avoid excessive drying

times and high electricity consumption.

• Ventilate the room well. The room temperature

should not exceed +35°C during drying.

In the interest
of the environment

• Materials marked with the symbol are recyclable.

• Check with your local Council or Environmental

Health Office to see if there are facilities in your
area for re-cycling this appliance.

• When the appliance is to be scrapped, cut off the

power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.

• Help to keep your country tidy - use authorised

disposal sites for your old appliance.

How do we help to protect the
environment? We use recycled paper!

• Old appliance

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by in appropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local city office, your household waste disposal
service or the shop where you purchased the product.

Description of the Appliance

01 Control panel
02 Water reservoir
03 Fluff filters
04 Rating Plate
05 Condenser unit
06 Adjustable feet

4

The Control Panel

Cotton extra dry

Ready to wear

Iron dry

Slightly damp

Store dry

Machine iron dry

Store dry

Synthetic extra dry

Iron dry

Baby

Memory

1

Memory

2

Reset/

Off

60 min

30 min

Cooling

Change

Options

Exit

Cotton extra
Drying

08.30

10.55

1200

1 23

4

Door Spin

Ready to wear

Iron dry

Slightly damp

Store dry

Machine iron dry

Store dry

Iron dry

Memory

1

Memory

2

Reset/

Off

Start/
Pause

ZDC 5375W

Door Spin Option Change Exit

60 min

30 min

Cooling

134562

TIMELINE

AUTOREVERSE 6 kg

1

Allows you to select electronically controlled or time
controlled drying.

Turn the dial to the required programme or time.
The selector dial can be turned either clockwise or

counterclockwise.

Electronically controlled drying (automatic)

The appliance runs these programmes with the help
of probes which detect the degree of dampness of the
laundry.
Simply select the programme according to the type of
laundry and degree of drying required.

Time controlled drying

This can be used to finish off drying if necessary.
Select the 60 minute programme for cottons or the 30
minute programme for synthetics.

To cancel a programme which is running, turn the
programme selector dial to “RESET/OFF”.

At the end of drying, turn the selector dial to
“RESET/OFF” to switch the machine off before
removing the laundry.

The selector dial is divided into 4 sections:

● Cotton (blue section)

● Synthetics (green section)

● Time controlled drying (grey section)

● Memory 1, Memory 2 (green section)

Programme/Time
Selector Dial

2

Display

The DISPLAY is used for setting a large number of
functions and combine them with each other using
only a few control elements (1 programme selector
dial and 6 buttons). This simple control method is
made easy thanks to the interactive display .
Interactive means that the dryer display changes to
reflect each step you have entered. This ensures that
only those settings that make sense are made. You are
able to see the current settings at any time in the
information panel and in the option row .

1. Information panel shows the current settings and
the current phase of drying cycle.

2. Real time clock

3. End cycle time

4. Selection shows the spin speed of your washing
machine and the options selected.

3

DOOR RELEASE Button

Press this button to open the door.
The icon appears above the relative button.
If the door is opened while the programme is running
the appliance immediately stops drying. The «Pause»
message appears on the display, the icon is
shown above the Door button and the START/
PAUSE button starts flashing.

Opening the door by means of this button is
possible only if the tumble dryer is on
(programme selector dial set to a programme or
drying time).

5

If you open the door during a programme, in order to
restart the programme you must press the Start/Pause
button again after having closed the door. The
icon appears on the display above the relative door
button.

4 SPIN SPEED Button

Press this button repeatedly until the value shown on
the display matches the speed the laundry items were
originally spun in your washing machine.
Depending on the type of laundry the spin speeds are
the following:

- COTTONS: ........800-900-1000-1100-1200-1300

1400 1500-1600 rpm.

- SYNTHETICS: ..800-900-1000 rpm.

- JUMPERS (BABY DRY): 800-900-1000-1 100-1200 rpm.

If you do not know the exact laundry spin speed you
can choose blank (no value on the display). The
tumble dryer will dry the laundry using a default
factory drying cycle.
Using this option you could decrease the drying cycle
time, saving energy.
If you have selected a time controlled programme
(60 min. or 30 min.) you could not use this option
because it has been selected a fixed time of drying.
If you try to press this button a warning message
«Selection error» appears in the display.

5 OPTION, CHANGE and

EXIT Buttons

Option button allows you to move through the
option icons.

Half Power
No

Door Spin

Options

Change

10.55

Exit

Change button allows you to select/change the status
of the different icons.

Half Power
Yes

Door Spin

Options

Change

10.55

Exit

Exit button allows you to return to the previous
selection.

Cotton extra
Cycle end at

Door Spin

1200

Options

Change

08.30

10.55

Exit

Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before pressing the
START/PAUSE button.
By depressing the «Option» button, all the symbol
icons, allowed for the selected programme, will
appear in the display .
The first option (Half Power) will start flashing.
Its name and status will appear on the display .
If you want to change the option status, press
«Change» button. A line will appear below the
selected icon, indicating that the option is set.
To select the other options press again the «Option»
button and proceed as before.
Once you have completed the selection of the options,
press the «Exit» button, the selected icons will remain
fixed on the display .

Note: To modify the already chosen option selections,
repeat the previous procedure.

Half Power

Selecting this option allows drying to be performed at
a lower temperature, for delicate items.
The corresponding icon appears on the display
during set up mode and the drying cycle.
A dash is shown under the relative icon to indicate
that the option has been selected.
This option can also be used for time controlled
drying.
This option cannot be selected with Quick Dry .

6

Quick

By selecting this option the drying time is reduced in
the following COTTON programmes:

● EXTRA DRY

● READY TO WEAR

● STORE DRY

This option cannot be selected with Half Power
and Dry Level option.

Delay Start

This option makes it possible to delay the starting of
the drying programme by 30 min - 60 min - 90 min, 2
hours and then by 1 hour till 20 hours. You can
modify the status of the delay pressing the «Change»
button sequentially . The delay you have selected is
indicated in the display .

Delay Start
Start in 30 min.

1200

Door Spin

Options

Change

12.15

9.42

Exit

You must select this option after you have set the
programme and before you press the START/PAUSE
button.
You can cancel the delay time at any moment, before
you press the START/PAUSE button. If you have
already pressed the START/PAUSE button and you
wish to cancel the delay time proceed as follows:

1. set the dryer to PAUSE by pressing the
START/PAUSE button;

2. deselect the Delay start option, changing the
status;

3. press the START/PAUSE button to start the
programme.

Important!

The selected delay can be changed only after selecting
the drying programme again.
If you wish to load other laundry to be dried after
having selected the delay time option:

- open the door, pressing the relative button

- load your laundry

- press the START/ PAUSE button, after having
closed the door.

Half Load

This option can be selected when the load inside the
drum is less or equal to the half load weight declared

by the programme selected.
This option will decrease the duration of the drying

phase and it allows you to save energy.
This option cannot be selected with time controlled
dying (30 min. and 60 min.).

Long Anticrease

To be used when you are not able to remove your
dried laundry just after the end of the drying cycle.

Selecting this option the anticrease phase will be
prolonged by an hour.

Dry Level

Selecting Dry Level option, you can choose 3
different degrees of humidity that your laundry
retains.

To select the requested humidity degree press the
«Change» button repeatedly.

When on the display appears:

Increased Dry

You have chosen the medium degree of drying.
Drying cycle time will increase by approx. 3
min.

Very Dry

Provides the highest degree of drying. Drying
cycle time will increase by approx. 6 min.

Reduced Dry

Provides the lowest degree of drying. Drying
cycle time will decrease by approx. 2 min.

T o confirm your choice press « Exit».
This option cannot be selected with Quick option .

No Buzzer

A buzzer sounds:

● when selecting the programme

● when an incorrect option selection is made

● when the programme selector dial is turned to

another position during the programme or when
you press an option button during the cycle

● at the end of the programme

● when the water reservoir is full

● if the machine is not working correctly

● when the small door at the bottom is open.

By selecting this option, pressing «Change» button,
the acoustic signal is switched off:

● at the end of the programme

● when the water reservoir is full

● if the machine is not working correctly

● when the small door at the bottom is open.

7

To confirm this option press «Exit» button.

Set Up menu:

Menu option is used for selecting various basic
settings without affecting the particular drying
programme. These basic settings will remain active
until they are deselected/modified.
To move through the different Menu settings use the
«Option» button. To change/confirm the selected
setting use the «Change» button.

Memory

Programme settings that are frequently used can be
saved. There are 2 memory spaces available for this
purpose. The saved programme can be selected in the
same way as any other drying programme by means
of the selector dial.
Example: Cotton Extra Dry , 1200 rpm, No Buzzer
and Dry Level option).

1. Select the cycle and programme settings.

Reset/

Off

2

Memory

Cooling

30 min

60 min

Memory

Baby

1

Iron dry

Store dry

Cotton extra dry

Ready to wear

Store dry

Slightly damp

Iron dry

Machine iron dry

Synthetic extra dry

Cotton extra
Cycle end at

Door Spin

1200

Options

Change

08.30

10.55

Exit

To change the memorised programme setting repeat
the procedure from the beginning.

Sound

The sound setting permits you to modify the volume
of the sound emitter. You can choose between
different levels: low, no sound and normal.

Example:

1. Enter the Menu option and select the sound setting.

Sound
Normal

Temp. Spin

2. Use the «Change» button to select the desired
level.

Sound
Low or No Sound

Temp. Spin

Options

Options

Change

Change

Exit

Exit

2. Enter the Menu option and select one of the
memory positions. «Store programme?»
message will appear in the display.

A

Setup

Temp. Spin

Options

A

Change

Exit

B

Memory 1
Store programme?

Temp. Spin

Options

Change

Exit

B

3. To memorise the selected programme press the
«Change» button. «Stored» message will appear
in the display.

Programme Stored

Change

Temp. Spin

Options

Exit

Water Hardness

You can change the water hardness choosing 3
different degrees (see the chapter «Adjusting the level
of conductivity» on page 22).

Language

You can change the language setting if you would like
the indicators in the display to appear in a different
language.

8