Zanussi ZD694X User Manual
DISHWASHER
ZD 694 X
INSTRUCTION BOOK
152977 38/0
UK
COP04
2
The control panel
Description of the appliance
1. Water hardness adjustment
2. Levelling spacers
3. Upper basket stop
4. Salt container
5. Lower spray arm
6. Detergent dispenser
7. Control panel
8. Rating plate
9. Rinse aid dispenser
10. Large filter
11. Central filter
12. Upper spray arm
13. Upper basket
2
3
4
5
6
8
9
10
11
12
IN85
13
1
7
1. ON/OFF indicator light
2. ON/OFF push button
3. Programme guide
4. Door handle
5. Programme marker
6. Programme selector dial
7. Programme sequence indicator
As the programme progresses, the programme
selector dial turns, to show the phase in the wash
programme the appliance has reached.
Prewash /Rinse and Hold
Wash
Cold rinse
Hot rinse
Drying
3
Type of load
Degree of soil Starting position
of the programme
selector dial
Required
push button
Recommended
quantity of detergent
wash prewash
Cycle
description
Washing programmes
*
HEAVY
SOIL
NORMAL
SOIL
65°C
**
QUICK
WASH 65°C
RINSE AND
HOLD
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying
Main wash up to 65°C
1 cold rinse
1 hot rinse
1 cold rinse
Heavy soil.
Crockery and
cutlery
Normal soil.
Crockery and
cutlery
Light soil.
Crockery and
party crockery
A
B
C
D
On/Off
On/Off
On/Off
On/Off
**
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so
that you may re-use them promptly.
*
Testing programme for EN 50242 (see "Hints for Test Centres).
25 g 5 g
30 g /
30 g /
//
Partial load (to be
completed later
in the day).
4
1. Check the filters
Ensure they are clean and properly positioned
(see "Maintenance and cleaning" - Instruction book
part 1).
2. Check that there is rinse aid and
salt
(See "Instruction book - part 1")
3. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc.in it.
Slide the baskets back into the machine.
4. Ensure that the spray arms can
rotate freely
5. Measure out detergent
Add the required amount of detergent into the
dispenser according to the "Washing programmes"
chart.
Close the detergent dispenser lid.
6. Close the dishwasher door
7. Set the programme
Turn the programme selector dial clockwise
until the letter of the programme you wish to select
corresponds with the programme marker on the
control panel.
8. Start the programme
Depress the On/Off push button.
The On/Off indicator light will come on and the
machine will start.
If you wish to interrupt the washing programme at
any time press this button again.
9. At the end of the washing
programme
At the end of the programme the dishwasher will
automatically stop.
The On/Off indicator light remains on until the On/Off
push button is depressed.
10. Switch off the dishwasher
Switch off the dishwasher by pressing the On/Off
push button and open the door.
Wait a few minutes before removing the dishes;in
this way they will be cooler and the drying will be
improved.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
When the washing programme has finished, it
is recommended that the dishwasher is
unplugged and the water tap turned off.
In general it is not advisable to open the door
while the machine is working; if the door is
opened however, a safety device ensures that
the machine stops.
Important!
Care must be taken if the door is opened during
the hot phase or immediately after a
programme has finished, as steam may escape.
Operating sequence
5
Loading your appliance
Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.
Do not load very small items which can fall
through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.
The two rear rows of prongs on the lower basket can be
easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see pictures).
- To bring them back to the standing position, just pull
them up again.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned horizontally
in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
The cutlery basket is in two parts which can be separated
to give greater loading flexibility.To separate the two parts,
slide them horizontally in opposite directions and pull them
apart.To reassemble, reverse the procedure.
Using your appliance
UI48
UI21
UI85
UI18
UI62
6
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
If dishes are loaded in the upper basket, tilt them forwards.
Arrange items on and underneath the fold-down cup racks
so that water can reach all surfaces.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
Before closing the door, ensure that the spray
arms can rotate freely.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 31 cm
in diameter) you can load them in the lower basket after
moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the
stops (A) in their original position.
When the top basket is in the higher position it
will only take plates up to 20 cm in diameter
and you will not be able to use the raised cup
racks.
After loading your machine always close the
door,as an open door can be a hazard.
US64
A
RC01
US70
Dimensions Width 59.6cm
Height 81.8 - 87.8 cm
Max depth 57.5 cm
Max depth with open door 111.4 cm
Electrical connection Voltage 220/240 V - 50 Hz
Motor rating during wash 200 W
Power of heating element 2100 W
Overall power 2300 W
Water supply pressure Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
Capacity 12 place settings
Technical specifications
7
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser
Test standard: EN 50242
Reference programme: HEAVYSOIL 65°C
Load: 12 standard place settings
Rinse aid selector: position 5
Detergent dosage: 25 g in the dispenser
5 g on the dispenser lid
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Instruction Book
- Before use
- Maintenance
- Installation
1
Contents
Important safety information 2
Before use 3
Setting the water softener 3
Filling with salt 4
Filling with rinse aid and adjusting the dose 5
Use of detergent 6
Hints and tips 7
Maintenance and cleaning 8
Internal cleaning 8
Cleaning the filters 8
External cleaning 8
Prolonged periods of non-operation 8
Frost precautions 8
Moving the machine 8
Something not working 9
Installation 10
Water supply connections 10
Water outlet connection 10
Electrical connection 11
Guide to use the instruction book
Safety instructions
1. 2. 3. Step by step
Hints and tips
Environmental information
DISHWASHER
152981 19/2
Loading...