Zanussi ZCV66000WA, ZCV68000XA User Manual

EN
User Manual
Cooker
ZCV66000WA ZCV68000XA

Contents

Safety information 2 Safety instructions 3 Product description 6 Before first use 7 Hob - Daily use 7 Hob - Hints and tips Hob - Care and cleaning
Oven - Daily use 8 Oven - Hints and tips 10 Oven - Care and cleaning 15 Troubleshooting 17 Installation 17 Energy efficiency
7 8
Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.

Children and vulnerable people safety

WARNING!
Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
Cleaning and user maintenance shall not be made by children
without supervision.
19

General Safety

Only a qualified person must install this appliance and replace
the cable.
Do not operate the appliance by means of an external timer or
separate remote-control system.
2 www.zanussi.com
Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance to avoid the possibility of electric shock.
Internally the appliance becomes hot when in operation. Do not
touch the heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware.
Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which may result in shattering of the glass.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.

Safety instructions

Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
• Do not pull the appliance by the handle.
• The kitchen cabinet and the recess must have suitable dimensions.
www.zanussi.com 3
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safe structures.
• Parts of the appliance carry current. Close the appliance with furniture to prevent touching the dangerous parts.
• The sides of the appliance must stay adjacent to appliances or to units with the same height.
• Do not install the appliance on a platform.
• Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.
• Make sure to install a stabilizing means in order to prevent tipping of the appliance. Refer to Installation chapter.

Electrical Connection

WARNING!
Risk of fire and electrical shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Do not let mains cables touch or come near the appliance door, especially when the door is hot.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
• Fully close the appliance door, before you connect the mains plug to the mains socket.
Use
WARNING!
Risk of injury and burns. Risk of electrical shock.
• Use this appliance in a household only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not use the appliance as a work surface or as a storage surface.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Do not let sparks or open flames to come in contact with the appliance when you open the door.
• Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air.
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to the enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of the warranty law.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
• Do not keep hot cookware on the control panel.
• Do not let cookware boil dry.
• Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
4 www.zanussi.com
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance or directly on the bottom of the appliance.
• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches. Always lift these objects up when you have to move them on the cooking surface.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

Care and Cleaning

WARNING!
Risk of injury, fire, or damage to the appliance.
• Before maintenance, deactivate the appliance. Disconnect the mains plug from the mains socket.
• Make sure the appliance is cold. There is the risk that the glass panels can break.
• Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
• Be careful when you remove the door from the appliance. The door is heavy!
• Clean regularly the appliance to prevent the deterioration of the surface material.
• Remaining fat or food in the appliance can cause fire.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.

Internal light

• The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the appliance from the power supply.
• Only use lamps with the same specifications.

Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.

Service

• To repair the appliance contact an Authorised Service Centre.
• Use original spare parts only.
www.zanussi.com 5

Product description

2
1
3
4
4
5
3 2 1
5 4 3 2 1
6
180 mm
145 mm
145 mm
180 mm
1
3
456
2
45
1 2 3 1

General overview

Cooking surface layout

Control panel and hob
1
Air vents for the cooling fan
2
Heating element
3
Lamp
4
Fan
5
Shelf positions
6
Cooking zone 1200 W
1
Steam outlet - number and position depend
2
on the model Cooking zone 1700 W
3
Cooking zone 1200 W
4
Residual heat indicator
5
Cooking zone 1700 W
6

Cooker control panel

Knobs for the hob
1
Knob for the top oven functions
2
Knob for the main oven functions
3
Temperature lamp / symbol / indicator for
4
the main oven
6 www.zanussi.com
Temperature lamp / symbol / indicator for
5
the top oven

Accessories

Wire shelf For cookware, cake tins, roasts.
Grill- / Roasting pan To bake and roast or as pan to collect fat.

Before first use

WARNING!
Refer to Safety chapters.

Initial Cleaning

Remove all accessories from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance before first use. Put the accessories back to their initial position.

Preheating

Preheat the empty appliance to burn off the remaining grease.

Hob - Daily use

WARNING!
Refer to Safety chapters.

Heat setting

Symbols Function
Off position
1 - 6 Heat settings
Use the residual heat to decrease energy consumption. Deactivate the cooking zone approximately 5 - 10 minutes before the cooking process is completed.
Trivet For roasting and grilling.
Use the trivet only with the Grill- / roasting pan.
Preheat the two ovens. Heat up one oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function .
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The appliance can emit an odour and smoke. This is normal. Make sure that the airflow is sufficient.
Turn the knob to a necessary heat setting. To complete the cooking process, turn the knob to the off position.

Residual heat indicator

WARNING!
There is a risk of burns from residual heat.
The indicator comes on when a cooking zone is hot.

Hob - Hints and tips

WARNING!
Refer to Safety chapters.
www.zanussi.com 7

Cookware

The bottom of the cookware must be as thick and flat as possible.
Cookware made of enamelled steel and with aluminium or copper bottoms can cause the colour change on the glass-ceramic surface.

Examples of cooking applications

Heat
set-
ting:
1 Keeping warm
Application:

Hob - Care and cleaning

Heat
set-
ting:
2 Gentle simmering 3 Simmering 4 Frying / browning 5 Bringing to the boil 6 Bringing to the boil / quick frying /
deep-frying
Application:
WARNING!
Refer to Safety chapters.

General information

• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner applicable for the surface of the hob.
• Use a special scraper for the glass.

Cleaning the hob

Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the

Oven - Daily use

WARNING!
Refer to Safety chapters.
dirt can cause damage to the hob. Put the special scraper on the glass surface at an acute angle and move the blade on the surface.
Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and some detergent. After cleaning, rub the hob dry with a soft cloth.
8 www.zanussi.com
Loading...
+ 16 hidden pages