Important Safety Instructions
Your new fridge may have other functions compared to your previous one.
These warnings are provided in the interests of you r safety. Ensure that you understand them all before
installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the
meanings or warnings contact the Customer Care Department.
Keep the instruction booklet. It will come in handy if you later sell the appliance or give it to somebody else.
Prior to Installation
· Check the appliance for transport damage. Under
no circumstances should a damaged appliance be
installed. In the event of damage please contact
your retailer.
Installation
· This appliance is heavy. Care should be taken
when moving it.
· It is dangerous to alter the specifications or
attempt to modify this product in any way.
· Ensure that the appliance does not stand on the
electrical supply cable. If the supply cable is
damaged, it must be replaced by a cable
avaliable from your local Service Force Centre.
· Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
· Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the
required distance for ventilation, as stated in the
installation instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to
allow the refrigerant to settle.
Child Safety
· Do not allow children to tamper with the controls
or play with the product.
· There is a risk of suffocation! Keep packaging
material away from children.
the refrigerating system on the back of and inside
the cabinet. If the refrigerating system is
punctured, the cabinet will be damaged and
foodstuff inside may spoil.
If the refrigerant circuit should become
damaged:
avoid open flames and sources of ignition
thoroughly ventillate the room in which the
appliance is placed
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
· Do not place carbonated or fizzy drinks in the
freezer compartment. Bottles and cans must not
be placed in the frezeer compartment as they can
burst when the contents freeze.
Maintenance and Cleaning
· Before cleaning, always switch off the apppliance
and disconnect from the electrical supply
· When unplugging always pull the plug from the
mains socket, do not pull on the cable
.
Servicing
· This product should be serviced by an
authorised engineer and only genuine spare
parts should be used.
· Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre.
During Use
· This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs.
It is not intended for commercial or industrial
use.
· Containers with flammable gases or liquids can
leak at low temperatures. Do not store any
containers with flammable materials, such as
spray cans, fire extinguisher refill cartridges etc.
in the refrigerator or freezer.
Do not let sharp objects come into contact with
At the end of the Appliance Life
· When disposing of your appliance use an
authorised disposal site.
· Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
Scrapping old cabinets
When discarding the cabinet, hand it over to a
recycling station. For more information, call your
local city office or your dealer.
Zanussi 818 20 92-00/0
2
Contents
Important Safety Instructions 2.......
Scrapping old cabinets 2.......................
Contents 3..........................
Description of the Appliance 4........
Control Panel 4..............................
Using the fridge 4....................
Using the fridge 5....................
To start the fridge and thermostat control 5........
Temperature inside the fridge 5.................
Measuring the temperature 5...................
Switching off 5..............................
Cabinet interior 6............................
Hints and Tips 6.....................
Energy Saving Advice 6.......................
Food Storage 7..............................
Normal Ope rating Sounds 7....................
Maintenance and Cleaning 6..........
Removing the ventilation grille 6................
Internal Cleaning 7...........................
External Cleaning 7..........................
Defrosting the fridge 7........................
To Change the Light Bulb 7....................
When the appliance is not in use 7...............
Something Not Working 8............
ServiceandSpareParts 9............
Customer Care Department 9.........
Guarantee Conditions 9..............
Standard Guarante e Conditions 9................
Technical specification 9.............
Installation 10........................
Mains Cable 10...............................
Unpacking 10................................
Removing the transport supports 10..............
Installing the appliance 10......................
Electrical connection 11........................
Door Reversal 12.............................
Guide to use the instruction book
The following Symbols will be found in the text to guide you through the instructions
Safety instructions
1, 2, 3 ...
Step by step instructions for an operation
Hints and tips
Zanussi 818 20 92-00/0
3
Description of the Appliance
1
8
1
1
1
1
2
3
6
Control Panel
5
9
7
4
7
8
Modell ZCL911W
1. Wire shelf
2. Glass shelf
3. Vegitable drawer
4. Egg tray
5. Dairy compartment
6. Ventilation grille
7. Door shelf
8. Bottle shelf
9. Door shelf + butter box
A. Green pilot light
Illuminates when the fridge is operating.
Using the fridge
Operation
This a
domestic use only, specifically for
the sto
This appliance is designed to operate in ambient
temperatures (surrounding air temperature) between
10_C and 32_C.
If these temperatures are exceeded i.e., colder or
warmer, the appliance will not operate correctly.
Before use
·Remove all securing tapes.
·Wash the inside of t he appliance with lukewarm
water with a little bicarbonate of soda added (5ml to
0,5 litre of water). Do not use soap or detergent as
the smell may linger. Dry the appliance thoroughly.
liance isdesignedfo
age of edible foodstuffs.
A
B
B. Thermostat control knob
Usetoswitchonandsetthedesiredtemperaturein
the fridge.
·Before inserting the power plug into the socket and
switching on the appliance for the first time, leave it
standing upright for about 30 minutes, or for 2 hours
if it was transported horizontally. Otherwise the compressor may sustain damage. This time will allow the
oil sufficient time to return to the compressor.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax,
polishes or products containing alcohol.
Zanussi 818 20 92-00/0
4