Zanussi ZCF 127 C, ZCF 115 C, ZCF 146 C, ZCF 77 C, ZCF 94 C User Manual

820 41 72 28
OPERATING AND INSTALLATION MANUAL
CHEST FREEZER
ZCF 77 C ZCF 94 C ZCF 115 C ZCF 127 C ZCF 146 C
ZANUSSI
Prior to Installation
Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
Ensure that the appliance does not stand on the electrical supply cable.
Important: If the supply cable is damaged, it must be replaced by authorised service or qualified personnel using a special cable of the same type.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.
The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.
Refrigerant
The refrigerant isobutane (R 600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is neverthless flammable.
During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thorougly ventilate the room in witch the appliance is situated.
Child Safety
Do not allow children to tamper with the controls or play with the product.
There is a risk of suffocation! Keep packaging material away from children!
General Safety
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging
must therefore only be carried out by authorised technicians.
Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.
The appliance must not be located close to radiators or boilers.
Avoid prolonged exposure of the appliance to direct sunlight.
Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances.
During Use
This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs. It is not intended for commercial or industrial use.
Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable materials, such as spray cans, fire extinguisher refill cartridges etc. in the refrigerator.
Maintenance and Cleaning
Before cleaning, always switch off the appliance and disconnect from the electrical supply.
When unplugging always pull the plug from the mains socket, do not pull on the cable.
Servicing
This product should be serviced by an authorised engineer and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre.
At the end of the Appliance Life
When disposing of your appliance use an authorised disposal site.
Check with your local Council or Environmental Health Officer to see if there are facilities in your area for recycling the appliance.
Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.
IMPORTANT SAFETY INSTRUCTIONS
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department.
Instructions for the User
Important Safety Information 2
Description of the Appliance 4 Control Panel 4
Operation
Before use 5 Starting the Appliance 5 Alarm light 5 Temperature Control 5 Opening/Closing the Lid 5 The role of the pressure equalisation valve 6 Freezing Fresh Food 6 Frozen Food Storage 6 Thawing 6 Low Frost System. 6 Baskets 7
Hints and Tips
Normal Operating Sounds 8 Food Storage 8 Energy Saving Advice 8 In the Event of a Power Failure 8
Defrosting 9
Maintenance and Cleaning
Internal cleaning 10 External cleaning 10 When the appliance is not in use 10 Lock 10
Something Not Working 11
Service and Spare Parts 12
Customer Care 12
Guarantee Conditions 13
Instructions for the Installer
Technical Specifications 16
Installation
Positioning 16
Electrical Connections 17
Guide to Use the Instructions
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Step by step instructions for an operation
Hints and Tips
Contents
Description of the Appliance
Control Panel
A - Compartment for frozen food storage B - Freezer calendar (recommended storage times for frozen foods) C - Compartment for freezing fresh foods D - Dividing wall E - Control panel F - Defrost water drain
Before Use
Remove all packaging and securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5m1 to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Starting the Appliance
Insert the plug into the wall socket. The green pilot light will illuminate to show that the appliance is switched on.
The red alarm light will also illuminate until the freezer reaches the correct temperature.
Alarm Light
The red alarm light will illuminate when the temperature in the freezer is higher than the thermostat setting. This alarm light will illuminate if:
The appliance has just been started. Fresh food has been put in the freezer. The lid has been left open, opened frequently or
open for too long.
The red light will go out when the freezer has returned to the correct temperature.
Temperature Control
The temperature within the freezer is controlled by the thermostat situated on the lower front of the cabinet. To operate the freezer, proceed as follows:-
When you first start the freezer we suggest that you turn the thermostat to a medium setting ie 3-4. The correct setting can be found by measuring the temperature of the top middle package in the freezer. This should not have a temperature warmer than
-18°C. 1 = Lowest setting, minimum cold 7 = Highest setting, maximum cold Allow the freezer to run for several hours before
placing food inside. Do not fill the freezer to more than 5mm below the top
edge.
Opening/Closing the Lid
The lid is fitted with a tightly closing sealing strip to prevent moisture entering the freezer, increasing the amount of frost formed.
When the lid is opened the air inside the freezer becomes slightly warmer and expands. When the lid is closed again the air is cooled immediately. This may lead to the creation of a vacuum which makes it hard to open the lid again immediately. Never use excessive force on the handle.
Operation
Loading...
+ 11 hidden pages