Zanussi ZC345 USER MANUAL
FRIGORIFICO
REFRIGERATOR
ZC345P-1
ZC345R
ZC395P-1
ZC395R
INSTRUCCIONES DE USO
INSTRUCTION BOOKLET
8181455--02/6
Safety instructions
Your new fridge may have other functions compared to your previous one.
Carefully read these instructions to learn how the appliance works and how to care for it. Keep the
booklet. It will come in handy if you later sell the cabinet or give it to somebody else.
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the
meanings or warnings contact the Customer Care Department.
For the User
· The cabinet is intended for keeping foodstuff in a
normal household as explained in this instruction
booklet.
· Do not keep explosive gases or liquids in the
refrigerator or freezer compartment. They may
explode and cause injury and material damage.
· Do not let sharp objects come into contact with
the refrigerating system on the back of and inside
the cabinet. If the refrigerating system is
punctured, the cabinet will be damaged and
foodstuff inside may spoil.
· Do not keep carbonised drinks or bottles in the
freezer compartment. The glass bottles may
break.
· The cabinet is heavy. The edges and projecting
parts of the cabinet may be sharp. Be careful
when moving the cabinet and always use gloves.
Child Safety
· Pay attention so that small children do not gain
access to the operating controls or the inside of
the cabinet.
Scrapping old cabinets
When discarding the cabinet, hand it over to a
recycling station. For more information, call your
local city office or your dealer.
GB
instruction
Contents
Safety instructions 12.................
Scrapping old cabinets 12.......................
Contents 12..........................
Description of the Appliance 13........
Control Panel 13..............................
Before use 14.........................
Using the fridge 14....................
To start the fridge and set the correct temperature 14.
Temperature inside the fridge 14.................
Measuring the temperature 14...................
Switching off 15..............................
Cabinet interior 15............................
Hints and Tips 15.....................
Saving energy 15.............................
Food Storage 15..............................
Protect the environment 16......................
GB
Maintenance and Cleaning 16..........
Removing the ventilation grille 16................
Defrosting the fridge 16........................
Cleaning 16..................................
To Change the Light Bulb 17....................
When the appliance is not in use 17...............
Something Not Working 17............
Guarantee Conditions 18.......................
Technical specification 18.............
Installation 18........................
Unpacking 18................................
Before installing the cabinet 19..................
Cleaning 19..................................
Mounting of door pane ls 19.....................
Remove the transport supports 19................
Installing the cabinet 19........................
Door Reversal 20.............................
Electrical connection 20........................
12
Zanussi 818 14 55-02/6
Description of the
A
ppliance
GB
1
8
1
1
1
2
3
3
3
6
1
1
8
1
1
1
2
4
5
4
7
7
8
5
7
7
7
Modell ZC345R, ZC345P-1
1. Wire shelf
2. Glass shelf
3. Vegitable drawer
4. Egg tray
5. Dairy compartment +
butter box
6. Ventilation grille
7. Door shelf
8. Bottle shelf
Modell ZC395R, ZC395P-1
1. Wire shelf
2. Glass shelf
3. Vegitable drawer
4. Egg tray
5. Dairy compartment +
butter box
6. Ventilation grille
7. Door shelf
8. Bottle shelf
3
3
3
6
Control Panel
A. Green indicator lamp
Lights when the fridge is operating.
8
A
B
B. Thermostat control
Usetoswitchonandsetthedesiredtemperaturein
the fridge.
Zanussi 818 14 55-02/6
13
Before use
Position and clean the cabinet as explained in the
section "Installation".
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
GB
Using the fridge
To start the fridge and set the
correct temperature
Turn the t hermostat control to the desired position.
1 : The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
6 : The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
0 : Switched off.
Allow t he cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside t he
cabinet.
Temperature inside the fridge
A suitable temperature inside the fridge is approx.
+5°C. If the thermostat control is set to a too cold
temperature, food with a high water content may
start to freeze if it has been placed in the coldest
places in the fridge. The picture shows the coldest
and warmest places inside the fridge.
(+ warm, - cold)
Meat, fish and milk should be put in the coldest part
of the cabinet.
The temperature will be affecteed by:
· How often the door is opened
· How much food is stored
· Position of the appliance (See chapter
Installation)
Measuring the temperature
If the temperature is measured using a standard,
single thermometer, this should be put in a glass of
water centrally placed inside the cabinet. This will
reflect the temperature inside the food products. Do
not place the thermometer hanging or lying directly
on the shelf.
GB
+
--
--
--
--
--
+
+
--
+
14
Zanussi 818 14 55-02/6
Loading...