Zanussi ZC345, ZC345R, ZC395, ZC395R USER MANUAL

FRIGORIFICO

REFRIGERATOR

ZC345

ZC345R

ZC395

ZC395R

INSTRUCCIONES DE USO

INSTRUCTION BOOKLET

8181455--01/8

Safety instructions

Your new fridge may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. Keep the booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are insure about any of the meanings or warnings contact the Customer Care Department.

For the User

· The cabinet is intended for keeping foodstuff in a

normal household as explained in this instruction booklet.

· Do not keep explosive gases or liquids in the

refrigerator or freezer compartment. They may explode and cause injury and material damage.

· Do not let sharp objects come into contact with

the refrigerating system on the back of and inside the cabinet. If the refrigerating system is punctured, the cabinet will be damaged and foodstuff inside may spoil.

· Do not keep carbonised drinks or bottles in the

freezer compartment. The glass bottles may break.

· The cabinet is heavy. The edges and projecting

parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.

Child Safety

· Pay attention so that small children do not gain

access to the operating controls or the inside of

the cabinet.

Scrapping old cabinets

When discarding the cabinet, hand it over to a recycling station. For more information, call your local city office or your dealer.

instruction

Contents

Safety instructions 11.................

Scrapping old cabinets 11.......................

Contents 11..........................

Description of th e Apliance 12.........

Control Panel 12..............................

Before use 13.........................

Using fridge 13.......................

To start the fridge and set the correct temperature 13.

Temperature inside the fridge 13.................

Measuring the temperature 14...................

Switching off 14..............................

Cabinet interior 14............................

Hints and Tips 15.....................

Saving energy 15.............................

Food Storage 15..............................

Protect the environment 15......................

Maintenance and Cleaning 15..........

Removing the ventilation grille 15................

Defrosting the fridge 15........................

Cleaning 16..................................

To Change the Light Bulb 16....................

When the appliance i s not in use 16...............

Something Not Working 17............

Guarantee Conditions 17.......................

Technical specification 18.............

Installation 18........................

Unpacking 18................................

Before installing the cabinet 18..................

Cleaning 18..................................

Remove the transport supports 19................

Installing the cabinet 19........................

Electrical connection 19........................

Door Reversal 20.............................

Zanussi 818 14 55-01/8

Description of the

pliance

Model ZC395, ZC395R

1. Wire shelf

2. Glass shelf

3. Vegitable drawer

4. Egg tray

5. Dairy compartment + butter box

6. Ventilation grille

7. Door shelf

8. Bottle shelf

Model ZC345, ZC345R

1. Wire shelf

2. Glass shelf

3. Vegitable drawer

4. Egg tray

5. Dairy compartment + butter box

6. Ventilation grille

7. Door shelf

8. Bottle shelf

Control Panel

A. Green indicator lamp

Lights when the fridge is operating.

B. Thermostat control

Usetoswitchonandsetthedesiredtemperaturein the fridge.

Zanussi 818 14 55-01/8

Before use

Position and clean the cabinet as explained in the section "Installation". Check that the drain hose at the rear of the cabinet discharges into the drip tray.

Before inserting the power plug into the outlet and switching on the cabinet for the first time, leave it standing upright for about 30 minutes, or for 4 hours if it was transported horizontally. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor.

Using fridge

To start the fridge and set the correct temperature

Turn the thermostat control to the desired position. 1 : The l owest position of the thermostat control results in the highest temperature inside the cabinet. 6 : The highest position of the thermostat control results in the lowest temperature inside the cabinet. 0 : Switched off. Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet.

Temperature inside the fridge

A suitable temperature inside the fridge is approx. +5°C. If the thermostat control is set to a too cold temperature, food with a high water content may start to freeze if it has been placed in the coldest places in the fridge. The picture shows the coldest and warmest places inside the fridge. (+ warm, - cold) Meat, fish and milk should be put in the coldest part of the cabinet. The temperature will be affecteed by:

· How often the door is opened

· How much food is stored

· Position of the appliance (See chapter

Installation)

Zanussi 818 14 55-01/8

+ 8 hidden pages