Zanussi ZBQ665X, ZBQ665W, ZBQ665N, ZBQ665ALU, ZBF660W User Manual

...

BUILT-IN OVENS

ZBF 660

ZBS 663

ZBQ 665

INSTRUCTION BOOKLET

Please read this instruction booklet before using the appliance

Important Safety Information

You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 08705 727727

Installation

 This oven must be installed by qualified personnel to

the relevant British Standards.

 This oven is heavy. Take care when moving it.

 Remove all packaging, both inside and outside the

oven, before using the oven.

 Do not attempt to modify the oven in any way.

Child Safety

 This oven is designed to be operated by adults. Do not

allow children to play near or with the oven.

 The oven gets hot when it is in use. Children should be

kept away until it has cooled.

During Use

 This oven is intended for domestic cooking only. It is

not designed for commercial or industrial purposes.

 Never line any part of the oven with aluminium foil.

Maintenance and Cleaning

 Only clean this oven in accordance with the instructions.

 The oven should be kept clean at all times. A build-up

of fats or other foodstuffs could result in a fire, especially in the grill pan.

 Always allow the oven to cool down and switch off the

electrical supply before carrying out any cleaning or maintenance work.

Service

 This oven should only be repaired or serviced by an

authorised Service Engineer and only genuine approved spare parts should be used.

Environmental Information

 After installation, please dispose of the packaging

with due regard to safety and the environment.

 When disposing of an old appliance, make it unusable,

by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.

 Do not allow heatproof cooking material, e.g. roasting

bags, to come into contact with oven elements.

 Never place plastic or any other material which may

melt in or on the oven.

 Do not place sealed cans or aerosols inside the oven.

They may explode if they are heated.

 Do not hang towels, dishcloths or clothes from the

oven or its handle.

 Do not use this oven if it is in contact with water and

never operate it with wet hands.

 Take great care when heating fats and oils as they will

ignite if they become too hot.

 Always use oven gloves to remove and replace food in

the oven.

 Ensure that all control knobs are in the OFF position

when not in use.

 Do not leave cookware containing foodstuffs, e.g. fat

or oil in or on the oven in case it is inadvertently switched ON.

 When using other electrical appliances, ensure the

cable does not come into contact with the hot surfaces of the oven.

Keep this instruction book for future reference

and ensure it is passed on to any new owner.

Content s

For the User For the Installer

Important Safety Information 2

Description of the Oven 4

Controls 5

Before the First Use 6

Electronic programmer 7

Using the Oven 9

Hints and Tips 9

Using the Conventional Oven 10

The Fan Oven 12

Grilling 14

Defrosting 15

Cleaning the Oven 16

Care of catalytic liners (ZBS 663 - ZBQ 665) 17

Cleaning the hinged grill 18

Replacing the Oven Light 18

Service and Spare Parts 19

Installation 21

Electrical Connection 21

Building In 22

Oven Door Protection Device

(stainless steel models only) All our appliances comply with the European safety standards. Nevertheless, in order to ensure the highest safety level, and avoid small children to be exposed to the heat when the appliance is operated, it is possible to fit a special protection device to the oven door. This device can be purchased in our Service Force Centres, specifying the relevant code (357824902/5) and the Product No. shown on the rating plate.

Something not working 19

Customer Care 20

Guarantee Conditions 20

Guide to use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

This appliance complies with the following E.E.C.

Directives: *73/23 - 90/683 (Low VoltageDirective); *93/68 (General Directives); *89/336 (Electromagnetical Compatibility Directive)

and subsequent modifications.

Description of the Oven

Mod. ZBF 660 / ZBQ 665

456

2 1

1. Control panel

2. Thermostat Control Light

3. Mains on Light

4. Thermostat Control Knob

5. Electronic Programmer

Mod. ZBS 663

6. Oven Control Function Knob

7. Oven Light

8. Grill

9. Oven Fan

10.Rating Plate

Oven accessories

Grill/roasting

pan

Removable

handles

Grill trivet

Anti-tip shelf (x 2)

Controls

Push-push control knobs

ZBQ 665: This model is provided with push-push control knobs. These knobs can be completely sunken inside the control panel when the oven is not working.

Oven Function Control Knob

Conventional cooking - The heat comes from both the top and bottom element, ensuring even

heating inside the oven

Bottom heating element - The heat comes from the bottom of the oven only

- Fan cooking - This allows you to roast or roast and bake simoultaneously using any shelf,

without flavour transference

Inner grill element only - Can be used for grilling small quantities

Full Grill - The full grill element will be on

Defrost Setting - This setting is intended to

assist in thawing of frozen food.

ZBQ 665

FO 0350

ZBF 660 - ZBS 663

FO 2676

ZBQ 665

Mains on Light

The mains on light will come on when the oven function control knob is set.

The cooling fan

The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram. The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.

FO 2583

FO 2259

100

150

200

max

Thermostat Control Knob (°C)

Turn the thermostat control knob clockwise to select temperatures between 50°C and 250°C (MAX).

Thermostat Control Light

The thermostat control light will come on when the thermostat control knob is turned. The light will remain on until the correct temperature is reached. It will then cycle on and off to show the temperature is being maintained.

The Safety Thermostat

This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.

ZBF 660 - ZBS 663

MAX

100

200

150

FO 2673

ZBQ 665

Before the First Use

Remove all packaging, both inside and outside the oven, before using the oven.

Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.

The oven will work only if the time of day has been set.

1. Set the time of day with the electronic programmer

(see chapter "Electronic Programmer").

2. Switch the oven function control knob to fan

cooking (ZBF 660 / ZBS 663) - (ZBQ 665).

3. Set the thermostat control knob to MAX.

4. Open a window for ventilation.

5. Allow the oven to run empty for approximately 45 minutes.

This procedure should be repeated with the grill function for approximately 5-10 minutes.

FO 2630

Electronic programmer

1. Push button for selecting a function

5 6

The oven will work only if the time of day has been set.

However, the oven can also be operated without any programme.

Setting the time of day

7 8

FO 2571

2. Decreasing control button  

3. Increasing control button  

4. Display

5. Cooking Duration pilot lamp

6. End of cooking pilot lamp

7. Minute minder pilot lamp

8. Time of day pilot lamp

When the power supply is switched on, or after a power failure, the Time of day pilot lamp will flash on the display.

To set the correct time of day:

1. Press button   or  .

2. After the setting is carried out, wait for 5 seconds: the Time of day pilot

lamp will go out and the display will show the set time. The appliance is ready for use.

To reset the correct time of day:

1. Press button repeatedly to select the Time of day function. The

relevant pilot lamp will start flashing. Then proceed as described above. The time of day can only be reset if no automatic function (cook duration

or end of cooking ) has been set.

Cooking Duration function

This function allows the oven to automatically switch off at the end of a programmed cooking duration time. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the Cooking Duration function. The relevant pilot lamp will start flashing. Then, proceed as follows:

To set the duration time:

1. Press button   or  .

2. After the setting is carried out, wait for 5 seconds: the "Cooking Duration"

pilot lamp will come on and the display will revert to the time of day.

3. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: turning the acoustic alarm off will reset the oven to manual, and if the oven function and the thermostat knobs are not set to zero the oven will start to heat again.

To cancel the duration time:

1. Press button repeatedly to select the Cooking Duration function.

The relevant pilot lamp will flash and the display will show the remaining cooking time.

2. Press button   until the display shows 0:00. After 5 seconds the pilot lamp will go out and the display will revert to the time of day.

End of cooking function

With this function, you can set the oven to switch off automatically when a programmed end of cooking time is over. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the End of cooking function. The relevant pilot lamp will start flashing. Then, proceed as follows:

To set the End of cooking time:

1. Press button   or  .

2. After the setting is carried out, wait for 5 seconds: the End of cooking pilot

lamp will come on and the display will revert to the time of day.

To cancel the End of cooking time:

1. Press button repeatedly to select the End of cooking function. The

relevant pilot lamp will flash and the display will show the programmed End of cooking time.

2. Press button   until the display shows the current time of day. The programmer will beep and the pilot lamp will go out.

Cooking duration and End of cooking time combined

The functions Cooking duration and End of cooking time can be used

simultaneously to set the oven to switch on and off automatically at a later time.

1. With the Cooking duration function (carry out the cooking duration setting as described in the relevant chapter) set the duration time. Then, press button

: the display will show the programmed setting.

2. With the End of cooking time function (carry out the End of cooking setting as described in the relevant chapter) set the end of cooking time. The relevant pilot lamps will come on and the display will show the time of day. The oven will switch on and off according to the set programmes.

Minute minder function

The minute minder alarm will sound at the end of a timed period, but THE OVEN WILL REMAIN ON, if it is in use.

To set the minute minder:

1. Press button repeatedly to select the Minute minder function. The relevant

pilot lamp will start flashing.

2. Then, press button   or   (maximum: 2 hours, 30 minutes).

3. After the setting is carried out, wait for 5 seconds: the Minute minder pilot

lamp will come on.

4. At the end of the timed period, the pilot lamp will start flashing and an acoustic alarm will be heard. To switch off the acoustic alarm, press any button.

To cancel the minute minder:

1. Press button repeatedly to select the Minute minder function. The relevant

pilot lamp will flash and the display will show the remaining time.

2. Press button   until the display shows 0:00. After 5 seconds the pilot lamp will go out and the display will revert to the time of day.

How to switch off the display

1. Press two or three programmer push buttons simoultaneously and keep them pressed for about 5 seconds. The display will switch off.

2. To switch on the display, press any button.

The display can be switched off only if no other functions have been set.

+ 17 hidden pages