Zanussi ZBP 1165 User Manual

BUILT-IN OVEN
ZBP 1165
INSTRUCTION BOOKLET
Please read this instruction booklet before using the appliance
GB
Important Safety Information
You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727727
Installation
This oven is heavy. Take care when moving it.
Remove all packaging, both inside and outside the oven, before using the oven.
Do not attempt to modify the oven in any way.
Child Safety
This oven is designed to be operated by adults. Do not allow children to play near or with the oven.
The oven gets hot when it is in use. Children should be kept away until it has cooled.
This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
During Use
This oven is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
Appliances become very hot with use, and retain their heat for long periods after use. Care should be taken to avoid touching heating elements inside the oven.
Always stand back from the oven when opening
the oven door during cooking or at the end of it to allow any build up of steam or heat to release.
Never line any part of the oven with aluminium foil.
Do not allow heatproof cooking material, e.g. roasting bags, to come into contact with oven elements.
Never place plastic or any other material which may melt in or on the oven.
Do not place sealed cans or aerosols inside the oven. They may explode if they are heated.
Do not hang towels, dishcloths or clothes from the oven or its handle.
Do not use this oven if it is in contact with water and never operate it with wet hands.
Take great care when heating fats and oils as they will ignite if they become too hot.
Always use oven gloves to remove and replace food in the oven.
Ensure that all control knobs are in the OFF position when not in use.
When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the oven.
Maintenance and Cleaning
Only clean this oven in accordance with the instructions.
The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan.
Never use steam or high pressure steam cleaners to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scraper to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
Always allow the oven to cool down and switch off the electrical supply before carrying out any cleaning or maintenance work.
Service
This oven should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential ne­gative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Do not leave cookware containing foodstuffs, e.g. fat or oil in or on the oven in case it is inadvertently switched ON.
2
Keep this instruction book for future reference
and ensure it is passed on to any new owner.
Content s
For the User For the Installer
Important Safety Information 2
Description of the Oven 4
The Oven Electronic Control 5
When the oven is first installed 6
Before the first use of the oven 7
Cooking Functions 9
Programming the Oven 9
Safety and Energy Saving Functions 11
The "Recipe Selection" Function 13
Using the Oven 14
Hints and Tips 14
The Conventional Oven 15
The Fan Oven 16
Cooking Chart-Conventional and Fan Oven 17
Grilling 18
Cooking Chart-Grilling 19
Installation 28
Technical Data 28
Electrical Connection 28
Building In 29
Pizza Oven 20
Defrosting 20
Cleaning the Oven 21
Something not Working 27
Guarantee/Customer Service 30
European guarantee 31
Guide to use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
This appliance complies with the following E.E.C.
Directives: *73/23 - 90/683 (Low VoltageDirective); *93/68 (General Directives); *89/336 (Electromagnetical Compatibility Directive)
and subsequent modifications.
3
Description of the Oven
Control Panel
Rating Plate
Oven Electronic Control
Air Vents for Cooling Fan
Grill Element
Oven Light
Oven Fan
Oven accessories
Grill/roasting
pan
Removable
handles
4
Grill trivet
Anti-tip shelf (x 2)
The Oven Electronic Control
Cooking Duration
Symbol
Minute Minder
Symbol
Cooking Functions
display
123 45 67
General Features of The Oven Electronic Control
The touch controls
All the oven functions are controlled by an electronic device. You can select any combination of cooking function, cooking temperature and automatic timing using the touch controls. Make sure you touch just one control at a time. If you press the control for a longer time, the cooking function which follows the desired one will be selected.
The display
The upper section of the display gives information about the time (the current time of day, the programmed cooking duration, the programmed end of cooking time, etc.), and shows the name of the selected cooking function or recipe.
The lower section gives information about the selected cooking function, the selected temperature and the current temperature inside the oven.
Time
display
Temperature
display
End Of Cooking Time
Symbol
Clock Symbol
Thermometer Symbol
8
The Oven Electronic Controls
1. ON / OFF Touch control
2. Cooking Functions Touch Control
3. Recipe Selection Touch Control
4. Fast Heat Up Function Touch Control
5. Pyrolytic Function Touch Control
6. " " Decreasing Touch Control (Time or Temperature)
7. " " Increasing Touch Control (Time or Temperature)
8. Time Function Touch Control
In the event of a power failure, the programmer will keep all the settings (time of day, programme setting or programme in operation) for about 3 minutes. If power is not restored within 3 minutes, all the settings will be cancelled. When the power is restored, you will have to re-set the programmer.
The Oven Safety Devices
The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequential over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.
The cooling fan
The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel (page 4). The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.
5
When the oven is first installed
When the oven is first connected to the electrical supply, or when supply is restored after a long power failure, the upper section of the display shows this message:
"WELCOME TO * KRONOS -3 * PYRO * DANSK * DEUTSCH * ENGLISH * ESPANOL * FRANCAIS * ЕЛЛЗНЙКБ * ITALIANO * NEDERLANDS * NORSK * PORTUGUES * SVENSKA * РУССКИЙ"
This message lists all the languages which can be chosen to operate with the Oven Electronic Control (Fig. 1).
Symbol flashing near the "Clock Symbol" means that you need to set the current time of day before using the oven.
T o set the correct time of day:
1. Touch the "Time Function Control" . While symbol
flashes near the "Clock Symbol" , set the
current time of day touching controls " " or " " (Fig.
2). Once you have set the time, the symbol keeps flashing for 5 seconds and then comes off. This means that the setting has been stored in the Electronic Control memory.
2. If symbol stops flashing before you have had time to set the clock, touch the "Time Function Control"
twice. The symbol starts flashing again.
Then, proceed as described at point 1.
Fig. 1
To Select the Language
You can choose the language to be used in the Oven Electronic Control display. The oven must be OFF when carrying out this operation.
1. Touch the "Cooking Function Control" and the
"Recipe Selection Control" at the same time and keep them pressed for 2 seconds at least. The
Electronic Control beeps once and the display shows the current language selection (Fig. 3).
2. Within 5 seconds, touch control " " to select your language (Fig. 4).
3. Once you selected your language, you have 5 seconds to confirm your selection by touching the "Cooking
Function Control" and the "Recipe Selection
Control" at the same time and keeping them pressed for 2 seconds at least.
Please note that any time you carry out a step of this procedure, you have 5 seconds of time to carry out the following step. If you wait more than 5 seconds the Electronic Control switches off and the selection is not stored in its memory.
Here follows the list of available languages:
Danish (DANSK), German (DEUTSCH), English (ENGLISH), Spanish (ESPANOL), French (FRANCAIS), Greek (ЕЛЛЗНЙКБ), Italian (ITALIANO), Dutch (NEDERLANDS), Norwegian (NORSK), Portuguese (PORTUGUES) Swedish (SVENSKA) and Russian (РУССКИЙ).
Fig. 2
Fig. 3
Fig. 4
6
Before the first use of the oven
Remove all packaging, both inside and outside the oven, before using it.
The oven will work only if the time of day has been set.
To switch the oven on and off
The oven must be switched on before setting any cooking
function or programme. When control is touched, the oven light will switch on. The oven symbol and the
message "LIGHT" appear on the display (Fig. 5).
To switch off the oven, you can touch control at any time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show the time of day only.
Before first use, the oven should be heated without food. During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Ensure the room is well ventilated.
Fig. 5
1. Set the time of day with the electronic programmer (see paragraph "To set the correct time of day").
2. Touch the "ON/OFF" control to switch on the oven.
3. Touch the "Cooking Functions" control twice and
select the "Conventional Cooking" function (Fig.
6).
4. Set the temperature to 250°C using control “ “ (Fig.
7).
5. Allow the oven to run empty for approximately 45
minutes.
6. Open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" function and the "Double Grill" function for approximately 5-10 minutes.
Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm water to which a little mild washing-up liquid has been added.
Before cooking for the first time, carefully wash the oven accessories.
Fig. 6
Fig. 7
7
T o select a Cooking Function
1. Switch on the oven by touching the
.
2. Touch the "Cooking Functions"
control
"ON/OFF" control
to select
the required oven function. Each time touched, a different cooking symbol appears in the
lower section of the display and the description of the cooking function appears as a message in the upper section. The pre-set temperature for each function is shown in the lower section, and symbol "" flashes on the right hand (Fig. 8).
3. Symbol "" flashing means that it is possible to
adjust the pre-set temperature by touching “
or
“ “ (Fig. 9).
degree steps. Please note that symbol "" will flash for 5 seconds.
4. When 5 seconds elapse, symbol "" will come off
showing that the temperature level has been stored in the Electronic Control memory. The thermometer
symbol rises slowly , indicating the degree to
which the oven is currently heated.
5. When the required temperature is reached, an acoustic alarm will sound for a short time and the
thermometer symbol will light permanently.
Temperature level is adjusted in 5
control
is
control
To set the temperature and
time
Fig. 8
Fig. 9
Control “ “ and “ “ are used to adjust both the temperature and the time settings. Details about using them according to the different functions of the Oven Electronic Control are given in the following chapters.
As a general rule, please note that:
> Controls “ “ and “ “ are used to increase or decrease
the temperature seetings while symbol "" flashes on the right hand of the temperature display. When you choose a cooking function, symbol "" keeps flashing for 5 seconds only. This is the useful interval to touch controls “ “ or “ “ and select your temperature setting. Once these 5 seconds elapse, symbol "" comes off and the thermometer symbol
comes on: this means that the current selection
has been stored in the Oven Electronic Control memory and that the oven is currently heating up.
> Controls “ “ and “ “ are used to increase or
decrease the time settings while the symbol is flashing near the "Clock" symbol , the "Minute Minder" symbol , the "Cooking Duration"
symbol or the "End Of Cooking Time" symbol . When you choose a time function, symbol keeps
flashing for 5 seconds only. This is the useful interval to touch control “ “ or “ “ and select your time setting. Once these 5 seconds elapse, symbol stops flashing: this means that the current selection has been stored in the Oven Electronic Control memory.
8
Cooking Functions
The following list displays in sequence all the available cooking functions.
1
2
3
4
5
FAN COOKING - This setting allows you to
roast or roast and bake simultaneously using any shelf, without flavour transference. Pre-set temperature: 175°C.
CONVENTIONAL COOKING - The heat comes
from both the top and bottom element, ensuring even heating inside the oven. Pre-set temperature: 200°C.
DOUBLE GRILL - The full grill element will be
on. Recommended for large quantities. Pre­set temperature: 250°C.
GRILL - It can be used for grilling small
quantities. Pre-set temperature: 250°C.
THERMAL GRILLING - This function offers an
alternative method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food. Pre-set temperature: 180°C.
Select a maximum temperature of 200°C.
10
6
7
8
9
PIZZA - The bottom element provides direct
heat to the base of pizzas, quiches or pies, while the fan ensures air is circulated to cook the pizza toppings or pie fillings. Pre-set temperature: 175°C.
BOTTOM - The heat comes from the bottom of
the oven only, to allow you to finish your dishes. Pre-set temperature: 250°C.
TOP - The heat comes from the top of the oven
only, to allow to you finish your dishes. Pre-set temperature: 250°C.
DEFROST
heat and circulates the air, at room temperature, inside the oven. This function is particularly suitable for defrosting delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products.
PYROLYTIC CLEANING - This function allows
you to clean thoroughly the oven cavity.
– The oven fan operates without
Programming the Oven
How to set the minute minder
1. Touch the "Time Function" control . The symbol
flashes near the "Minute Minder" symbol and
the time display shows "0.00" (Fig. 10).
2. Symbol will flash for 5 seconds. Within this time, touch control “ “ to select the required time (Fig. 11). Maximum time is 23 hours 59 minutes. After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
3. When the programmed time has elapsed, you hear
an acoustic alarm while symbol flashes and the
time display shows "0.00".
4. To switch off the acoustic alarm, touch any control.
The oven will NOT switch off if in use. The Minute Minder function can also be used when the oven is off.
To change the Minute Minder setting
Touch the "Time Function" control : the symbol
flashes near the "Minute Minder" symbol . It is now possible to change the Minute Minder setting by touching
control “ “ or “ “ (Fig.11).
To cancel the Minute Minder:
Touch time function control : the symbol flashes
near the "Minute Minder" symbol . Then touch control
“ “ until the time display shows "0.00".
Fig. 10
Fig. 11
9
To programme the Oven to
switch off
1. Switch the oven on, place food in the oven, select a cooking function and adjust the cooking tempe­rature, if required.
2. Touch the "Time Function" control . The symbol
flashes near the "Cooking Duration" symbol .
The time display shows "0.00" at the left hand and
the current time of day at the right hand (Fig. 12).
3. Symbol will flash for 5 seconds. Within this time, touch control “ “ to select the required time. Maximum time is 23 hours 59 minutes. Note that the time indication on the right hand will also change as you touch control “ “, showing at which time the oven will automatically switch off (fig. 13).
4. After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
5. When cooking time is over, the oven automatically switches off. You hear an acoustic alarm while symbol
flashes and the time display shows "0.00".
6. To switch off the acoustic alarm, touch any control.
Fig. 12
To cancel the Cooking Duration Time:
Touch time function control : the symbol flashes near the "Cooking Duration" symbol . Then touch
control “ “ until the time display shows "0.00".
Please note that, if you cancel the "Cooking Duration", the oven does not switch off.
To programme the Oven to
switch on and off
1. Carry out the "Cooking Duration" setting as described at points 1 to 4 in the previous chapter.
2. Touch the "Time Function" control twice: the
symbol flashes near the "End of Cooking Time" symbol (Fig. 14).
3. Within 5 seconds, touch control “ “ to select the required end of cooking time, which is shown at the right hand of the time display (Fig. 15).
4. After another 5 seconds after you have set the time, the symbol stops flashing, the thermometer symbol
comes off, the temperature display shows "30"
and the oven switches off. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
5. The oven will switch on and off automatically according to your settings. When cooking is completed, you hear an acoustic alarm while both
symbols and flash. The time display shows
"0.00" at the left hand.
6. To switch off the acoustic alarm, touch any control.
Fig. 13
Fig. 14
Fig. 15
To cancel the programme, simply cancel the Cooking Duration time as described at the end of the previous chapter.
10
Safety and Energy Saving Functions
Safety Cut-Off Function
The oven will switch off automatically if any change of setting is made, according to the table below (Fig. 16).
If temperature setting is: the oven will switch off:
250°C after 3 hours
from 200 up to 245°C after 5
from 120 up to 195°C after 8
1
/2 hours
1
/2 hours
Fig. 16
less than 120°C after 12
Child Safety Function
To avoid children switching on the oven, it is possible to lock the oven controls.
1. If the oven is on, switch if off by touching
OFF" control
2. Press
3. The oven is now locked. Neither oven functions nor
To unlock the oven:
Press them pressed for about 3 seconds. The Electronic Control
beeps once and the message ‘SAFE’ goes off. The oven
can now be operated.
control
them pressed for about 3 seconds. The Electronic
Control beeps once and the message ‘SAFE’ appears
in the display (Fig. 17).
temperatures can be selected.
control
.
s and
s and
“ “
hours
the "ON/
at the same time and keep
at the same time and keep
"Fast Heat Up" function (Booster)
After a cooking function has been selected and the temperature has been adjusted, the cavity will gradually heat up until the selected temperature is reached. This will take from 10 to 15 minutes, depending on selected function and temperature. If it is necessary to reach the required temperature in a shorter time, the fast heat up function can be used.
Fig. 17
Fig. 18
1. Switch the oven on by touching the "ON/OFF"
2. Set the required cooking function and temperature as described in the previous pages.
3. Set the temperature by touching
4. Touch the "Fast Heat Up Function"
temperature display shows "FHU" (Fig. 18).
5. If you touch the "Cooking Function" temperature display reverts to the selected temperature
and symbol this intervel, you can adjust the temperature setting by touching
6. When the required temperature is reached, the Electronic Control beeps for a short time, and the temperature display reverts to the selected temperature.
This function can be used with any cooking function or temperature.
""
flashes for 5 seconds (Fig. 19). During
control “ “ or
“ “.
control “ “ or
control
.
“ “.
control
. The
control , the
Fig. 19
11
Loading...
+ 25 hidden pages