Zanussi TD 4212W Instruction Manual

Page 1
TUMBLE DRYER
START
ON-OFF
DUAL TEMPERATURE
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
COTTON
STORE DRY
Spun at rpm
kg 5 kg 2.5
IRON DRY
800 / 900 1000 / 1200
80' - 100' 75' - 95'
55' - 70' 50' - 65'
Spun at rpm
650
50' - 60' 30' - 35'
kg 2.5 kg 1
800 / 900 1000 / 1200
70' - 90' 65' - 85'
35' - 50' 30' - 45'
STORE DRY
T
D
4
2
1
2
W
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
LOW TEMP.
LIGHT ON-OFF
DRYING TIME
XTRACAPACITY
AUTOREVERSE
TD 4212 W
125994620
Unpacking: see page 16
INSTRUCTION BOOKLET
GB
Page 2
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (optional accessory).
This tumble dryer is designed to be vented through
to the open air. It should have its own ventilation system which should not be joined with any other ventilation system connected to any other appliance.
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into tumble dryers. Please check your drum before use.
Keep all packaging well away for children.
Use
Do not overload the appliance (see programme chart).
Clothes which are dripping wet should not be placed in the dryer.
As some bulky items such as duvets and eiderdowns should be dried in large commercial machines because of their bulk, check with the manufacturer of the item if it is suitable for drying in a domestic machine, even if the dry weight of the item is within the limit advised.
Please make sure that no gas lighters have accidentally been left in pockets of garments to be loaded into appliance.
Danger of explosion: Never tumble dry items that have been in contact with inflammable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these substance are volatile, they could cause an explosion. Tumble dry only items washed with water.
In order to avoid danger of fires caused by excessive drying, do not use appliance to dry the following items: Cushions, quilts and the like (these items accumulate heat). Items containing rubber foam or materials similar to rubber foam.
Leave the door slightly ajar when the appliance is not being used. This will allow the seal to be preserved.
Clean fluff filters after using tumble dryer. To prevent fire risks, do not use the appliance if the fluff filters are damaged.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Centre. Always insist on genuine Zanussi spare parts.
2
Page 3
Contents
For the User
Important Safety Information
Installation 2
Child Safety 2
Use 2
Your New Tumble Dryer Description of the Appliance The Control Panel
Programme Chart 6
Low Temperature Button 6
Start Button 6
Mains-on Light 6
Drying Time selector dial 6
Programme Chart Operating Sequence
Load the laundry 8
Select the drying time 8
Start the machine 8
When drying is completed 8
For the Installer
2
Installation Instructions
Technical Specifications
Unpacking 16
Positioning 16
4 5 6
7 8
Fitting the vent hose 16-17
Door reversal 17
Stacking kit (optional accessory) 17
Electrical connection 18
15 15
Hints & Tips on Drying Maintenance and Cleaning
External cleaning 10
Cleaning the door 10
Cleaning fluff filters 10
Something Not Working Service and Spare Parts Customer Care Guarantee Conditions Zanussi Service Force
13-14
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips
9
10
11 11 11 12
Environmental information
3
Page 4
Your New Tumble Dryer
This tumble dryer will give your wash that soft, relaxed feel whatever the weather.
Extremely high quality standards both during development and manufacturing guarantee a long service life for your appliance.
Maximum economy in the operation of your dryer is achieved through very frugal electricity consumption and short drying times.
Energy saving tips
To save energy we recommend that you follow these hints:
Try to load the maximum capacity of the machine as small loads are uneconomical.
Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.
Do not over-dry laundry, this avoids creasing and saves energy.
Clean the filters regularly to avoid excessive drying times and high electricity consumption.
Ventilate the room well. The room temperature should not exceed +35°C during drying.
In the interest of the environment
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!
4
Page 5
Description of the Appliance
1
2
7
8
9
3
4 5 6
7
S
T
A
R
T
O
N
-
O
F
F
DUAL TEMPERATURE
IM
PO
RT
AN
T
: PL
E
AS
E
RE
A
D
TH
E
INS
TR
UC
T
IO
N
BO
OK
B
EF
O
RE
US
I
N
G
T
H
IS
A
P
P
LIA
N
C
E
C
O
T
T
O
N
S
Y
N
T
H
E
T
I
C
S
S
T
O
R
E
D
R
Y
S
p
u
n
a
t
r
p
m
k
g
5
k
g
2
.
5
I
R
O
N
D
R
Y
8
0
0
/
9
0
0
1
0
0
0
/
1
2
0
0
8
0
'
-
1
0
0
'
7
5
'
-
9
5
'
5
5
'
-
7
0
'
5
0
'
-
6
5
'
S
p
u
n
a
t
r
p
m
6
5
0
5
0
'
-
6
0
'
3
0
'
-
3
5
'
k
g
2
.
5
k
g
1
8
0
0
/
9
0
0
1
0
0
0
/
1
2
0
0
7
0
'
-
9
0
'
6
5
'
-
8
5
'
3
5
'
-
5
0
'
3
0
'
-
4
5
'
S
T
O
R
E
D
R
Y
TD
4212 W
IM
PO
RT
AN
T
: PL
E
AS
E
RE
A
D
TH
E
INS
TR
UC
T
IO
N
BO
OK
B
EF
O
RE
US
I
N
G
T
H
IS
A
P
P
LIA
N
C
E
L
O
W T
E
M
P
.
L
I
G
H
T
O
N
-
O
F
F
D
R
Y
I
N
G
T
IM
E
X
T
R
A
C
A
P
A
C
I
T
Y
A
U
T
O
R
E
V
E
R
S
E
10
11
12
1 Worktop 2 Programme chart 3 Low Temperature Button 4 Start Button 5 Mains-On Light 6 Drying Time Selector Dial/ON-OFF Switch 7 Fluff filters 8 Rating Plate 9 Adjustable feet
10 Side vent outlet 11 Ring nut 12 Rear vent outlet
5
Page 6
1 2 34 5
START
ON-OFF
DUAL TEMPERATURE
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
COTTON
SYNTHETICS
STORE DRY
Spun at rpm
kg 5 kg 2.5
IRON DRY
800 / 900 1000 / 1200
80' - 100' 75' - 95'
55' - 70' 50' - 65'
Spun at rpm
650
50' - 60' 30' - 35'
kg 2.5 kg 1
800 / 900 1000 / 1200
70' - 90' 65' - 85'
35' - 50' 30' - 45'
STORE DRY
TD
4
2
12
W
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
LOW
TEMP.
LIGHT
ON-OFF
DRYING TIMEDRYING TIME
XTRACAPACITY
AUTOREVERSE
The Control Panel
55
1 Programme Chart
This will help you to select the correct time for drying.
2 Low Temperature Button
Press this button to reduce the temperature when drying particularly delicate cotton or linen items. In this case you should select a longer drying time. On the programmes for synthetics the temperature is automatically reduced. Therefore it is not necessary to depress this button.
3 Start Button
After selecting the drying time press this button to start the programme. If the door is opened during drying, this button has to be depressed again after closing the door to allow the programme to continue.
4 Mains-On (ON-OFF) Light
This lights up when the machine starts operating and goes out by turning the selector dial to “0” and when you open the door.
Drying Time Selector
Dial/ON-OFF Switch
The selector dial incorporates two drying cycles, one of up to 150 minutes at a high temperature for cotton and linen, and one of up to 100 minutes at a low temperature for synthetic fabrics.
To set the machine to the selected time, turn the dial clockwise until the time you want coincides exactly with the pointer.
NEVER attempt to turn the dial in an anticlockwise direction.
When selecting the drying time, you should remember that it includes a 10 minute cooling phase (position on the dial).
This phase should not be shortened, stopped or avoided, as this could cause skin burns or damages to the laundry.
Additional drying
If at the end of the programme the laundry is still too damp, set the dial for a further period of drying (remembering to take into account the cooling period).
6
Page 7
Programme Chart
Cotton and linen
Selector dial: up to 150 minutes
Drying time in minutes for
Max. amount
Type of laundry:
Degree of drying
of laundry
in kg
800/900 rpm 1000/1200 rpm
laundry spun at
Cotton Towelling Shirts Sheets Hand towels Tablecloths Table napkins
Synthetics
Selector dial: up to 100 minutes
Type of laundry:
Store dry
(wardrobe dry)
Iron dry
(not completely dry;
suitable for ironing)
Degree of drying
6
5 80-100 75-95
2.5
6
5 70-90 65-85
2.5
Max. amount of
laundry in kg
100-125
55-70
90-110
35-50
Drying time in minutes for laundry
spun at a minimum speed of 650 rpm
95-115
50-65
85-105
30-45
Synthetics or mixed fabrics which do not require ironing.
Synthetics or mixed fabrics which have to be ironed. (Please see labels on items)
ATTENTION! Please follow the instructions on labels when drying mixed fabrics.
Drying times are given as a guide only. Experience will soon enable you to estimate the drying time needed for your usual laundry loads. Do not start by selecting a long drying time. It is better to determine the required degree of dryness by gradually increasing the drying time.
For a mixed load (cotton and synthetics, for example) select the time for the most delicate fibres and increase it by 10 mins.
Store dry
Iron dry
2.5 50-60
1
2.5
1
7
30-35
40-50
25-30
Page 8
100
M0045S
P1108
P1104
Operating Sequence
START
Before using your tumble dryer for the first time, we recommend you place a few damp cloths inside the appliance and dry for approximately 20 minutes. There may be dust inside a brand new tumble dryer.
1. Load the laundry
Open the door by pressing on the left side as per picture. Load the items one at a time, shaking them out loosely and close the door. Please check the laundry does not get caught between the door and filter.
4. Start the machine
Depress Start Button , the mains-on light comes on and the machine starts operating.
5. When drying is completed
The machine stops automatically. Turn the selector dial to “0”, the mains-on light goes out. If the laundry is still too damp, select a further brief drying time, bearing in mind that during the last 10 minutes the dryer carries out the cooling and anti­crease treatment phase.
2. Depress Button , if required
3. Select the drying time
Turn the selector dial clockwise to the desired time (in the high or low temperature range, according to the fabrics).
Clean the filters after every drying programme. Clean filters ensure correct functioning of the appliance.
8
Page 9
Hints & Tips on Drying
Before placing articles of laundry in your tumble dryer, check the care labels to ensure they are recommended for tumble drying.
Care Labels you may find on your laundry
normal drying (high temperature) delicate drying (low temperature) may be tumble dried do not tumble dry
Do not overload the appliance.
Here is a list of the approximate weight of some common laundry items.
Sheet 700 to 1000 g Pillowcase 100 to 200 g Tablecloth 400 to 500 g Table Napkin 50 to 100 g Kitchen Towel 70 to 120 g Linen Hand Towel 100 to 150 g Hand Towel 150 to 250 g Bath Towel 700 to 1000 g Bathrobe 1000 to 1500 g Shirt 200 to 300 g Apron 150 to 200 g
Always load well spun laundry. The higher the spin speed the lower the electricity consumption and the shorter the drying time.
DO NOT load dripping wet laundry into the dryer. Roll the article in a towel or spin to remove excess water.
Close poppers and zips and fasten any buttons.
Sort the laundry. Separate synthetics from cotton/linens, and dry separately.
Remove the laundry immediately after the programme has finished.
Use a fabric conditioning sheet to reduce static. We recommend the sheet is pinned to an article of laundry (using a safety pin).
Mix the load i.e. large and small articles.
When drying large items such as sheets, we recommend you periodically stop the dryer to redistribute the load.
DO NOT use the tumble dryer to dry the following:
Articles contaminated with inflammable substances e.g. petrol, cleaning solvents, cooking oil, fats or hair lacquer.
Woollen and synthetic/wool mixtures unless the item is labelled as suitable for tumble drying.
Very delicate articles such as silk.
Very large and bulky items such as duvets or sleeping bags.
9
Page 10
A
U
T
O
R
E
V
E
R
S
E
k
g
5
k
g
2
,
5
8
0
0
/
9
0
0
7
0
'
-
9
0
'
3
5
'
-
5
0
'
1
0
0
0
/
1
2
0
0
6
5
'
-
8
5
'
3
0
'
-
4
5
'
8
0
0
/
9
0
0
8
0
'
-
1
0
0
'
5
5
'
-
7
0
'
10
0
0
/
1
2
0
0
7
5
'
-
9
5
'
5
0
'
-
6
5
'
6
5
0
5
0
'
-
6
0
'
3
0
'
-
3
5
'
k
g
2
,
5
k
g
1
P1111
P1110
A
U
T
O
R
E
V
E
R
S
E
k
g
5
k
g
2
,
5
8
0
0
/
9
0
0
7
0
'
-
9
0
'
3
5
'
-
5
0
'
1
0
0
0
/
1
2
0
0
6
5
'
-
8
5
'
3
0
'
-
4
5
'
8
0
0
/
9
0
0
8
0
'
-
1
0
0
'
5
5
'
-
7
0
'
1
0
0
0
/
1
2
0
0
7
5
'
-
9
5
'
5
0
'
-
6
5
'
6
5
0
5
0
'
-
6
0
'
3
0
'
-
3
5
'
k
g
2
,
5
k
g
1
P1109
Maintenance and Cleaning
A
U
T
O
R
E
V
E
R
S
E
k
g
5
k
g
2
,
5
8
0
0
/
9
0
0
7
0
'
-
9
0
'
3
5
'
-
5
0
'
1
0
0
0
/
1
2
0
0
6
5
'
-
8
5
'
3
0
'
-
4
5
'
8
0
0
/
9
0
0
8
0
'
-
1
0
0
'
5
5
'
-
7
0
'
1
0
0
0
/
1
2
0
0
7
5
'
-
9
5
'
5
0
'
-
6
5
'
6
5
0
5
0
'
-
6
0
'
3
0
'
-
3
5
'
k
g
2
,
5
k
g
1
P1112
You must disconnect the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.
External cleaning
Use only soap and water and then dry thoroughly. Important: do not use methylated spirit, diluents or similar products.
Cleaning the door
Clean periodically the interior part of the door to remove any fluff from the seals around the filter. Regular cleaning ensures correct drying.
If necessary the filters can be cleaned under running water using a brush. In this case, remove the filter in the door opening as per picture (it can be positioned with the tongue facing to the left or to the righ).
Cleaning the filters
Your dryer will only function well if the filters are clean. The filters collect all the fluff which accumulates during drying and they must therefore be cleaned at the end of each programme, before removing the laundry, with a damp cloth.
The filter in the inner door must be removed for cleaning. Do not be alarmed by the amount of fluff. It is not due to excessive wear caused by the dryer. All fabric looses fluff when drying but it goes un-noticed in the air. In a tumble dryer it simply collects in the filter.
10
Page 11
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom
The tumble dryer does not start
Drying takes too long or laundry is not
dry enough.
If after the above checks, there is still a fault, call your local Zanussi Service Force Centre.
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the following pages. Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”. When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found on the rating plate - see picture on page 5).
5. The purchase date
Possible causes
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no current at the socket.
The main fuse or the fuse in the plug has blown.
A drying time has not been selected.
The Start Button has not been depressed.
The laundry has not been spun properly.
The filters are clogged up.
The room temperature is too high.
The selected time or drying cycle was not suitable for the laundry.
The low temperature button has been pressed.
There is too much laundry inside the appliance.
The dryer is not correctly installed.
Customer Care
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please contact our Customer Care Department by letter or telephone as follows:
Customer Care Department Zanussi 55-77 High Street Slough Berkshire SL1 1DZ Tel 08705 727727* or visit our website at www.zanussi.co.uk * calls to this number may be recorded for training
purposes.
11
Page 12
Guarantee Conditions
Standard guarantee conditions
We, Zanussi undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that:
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
The appliance has not been serviced, maintained, repaired, taken apart or tampered with, by any person not authorised by us.
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
Any appliance or defective part replaced shall become the Company’s property.
This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
Products of Zanussi manufacture which are NOT marketed by Zanussi.
European guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:
The guarantee starts from the date you first
purchased your product. The guarantee is for the same period and to the
same extent for labour and parts as exists in the new country of use for this brand or range of products.
The guarantee relates to you and cannot be
transferred to another user. Your new home is within the European
Community (EC) or European Free Trade Area. The product is installed and used in accordance
with our instructions and is only used domestically, i.e. a normal household.
The product is installed taking into account
regulations in your new country.
Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances.
France Senlis +33 (0)344 62 22 22 Germany Nurnberg +49 (0)911 323 2600 Italy Pordenone +39 (0)1678 47053 Sweden Stockholm +46 (0)8 738 79 50 UK Slough +44 (0)1753 219897
12
Page 13
To contact your local Service Force Centre telephone 08705 929 929
CHANNEL ISLANDS
GUERNSEY
Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD
JERSEY
Jersey Electricity Company Haut De Lorme Rue De Haut De Lorme Trinity Jersey Channel Islands JE3 5FG
SCOTLAND
ABERDEEN
54 Claremont Street Aberdeen AB10 6RA
AUCHTERMUCHTY
33a Burnside Auchtermuchty Fife KY14 7AJ
BLANTYRE
Unit 5 Block 2 Auchenraith Ind. Estate Rosendale Way Blantyre G72 0NJ
DUMFRIES
93 Irish Street Dumfries DG1 2 PQ
DUNOON
7 Hill Street Dunoon Argyll PA23 7AL
EDINBURGH
Unit 12 Dumbryden Ind. Estate 2 Dumbryden Road Edinburgh EH14 2AB
GLASGOW
Unit 4 Wellington Road Bishopriggs Glasgow G64 2SA
INVERNESS
Unit 3BI Smithton Ind. Estate Smithton Inverness IV2 7WL
ISLE OF ARRAN
RHaggerty Bruach Blackwaterfoot Isle of Arran
ISLE OF BARRA
JZerfah 244 Bruernish Isle of Barra Western Islands HS9 5QY
ISLES OF BUTE
Walker Engineering Glenmhor Upper Serpentine Road Rothesay Isle of Bute PA20 9EH
ISLE OF LEWIS
ND Macleod 16 James Street Stornoway Isle of Lewis PA87 2QW
KELSO
2, 6 & 8 Woodmarket Kelso Borders TD5 7AX
ORKNEY
7KingStreet Kirkwall Orkney KW15 1JF
PERTH
Scottish Hydro Electric Central Warehouse Inveralmond
(OWN SALES)
Perth PH1 3AF
SHETLAND
3-4 Carlton Place Lerwick Shetland
(OWN SALES)
ZE1 0PW
SHETLAND
Bolts Shetland 26 North Road Lerwick
(OWN SALES)
Shetland ZE1 0PE
WHALSAY
Leask Electrical Harisdale Symbister, Whalsay
(OWN SALES)
Shetland ZE2 9AA
NORTHERN IRELAND
BELFAST
Owenmore House Kilwee Business Park Dunmurry Belfast BT17 0HD
WALES
CARDIFF
Unit 4 Guardian Industrial Estate Clydesmuir Road Cardiff CF2 2QS
CLYWD
Unit 6-7 Coed Parc Abergele Road Rhuddlan Clwyd LL18 5UG
DYFED
Unit 9 St. Clears Business Park Tenby Road St. Clears Carmarthen SA33 4JW
OSWESTRY
Plas Ffynnon Warehouse Middleton Road Oswestry SY11 2PP
NORTH EAST
GATESHEAD
Unit 356a Dukesway Court Dukesway Gateshead NE11 0BH
GRIMSBY
15 Hainton Avenue Grimsby N. E. Lincs DN32 9AS
HULL
Unit 1 Boulevard Industrial Estate Hull HU3 4AY
LEEDS
64-66 Cross Gates Road Cross Gates Leeds LS15 7YS
NEWTON AYCLIFFE
Unit 23 Northfield Way AycliffeIndustrial Park Newton Aycliffe DL5 6EJ
SHEFFIELD
Pennine H ouse Roman Ridge Road Sheffield S9 1GB
NORTH WEST
BIRKENHEAD
1 Kelvin Park Dock Road Birkenhead CH41 1LT
CARLISLE
Unit 7 James Street Workshops James Street Carlisle Cumbria CA2 5AH
ISLE OF MAN
South Quay Ind. Estate Douglas Isle of Man IM1 5AT
BOLTON
Unit B Central Industrial Estate St Marks Street Bolton BL3 6NR
PRESTON
Unit 250 Dawson Place Bamber Bridge Preston Lancashire PR5 8AL
STOCKPORT
Unit 20 Haigh Park Haigh Avenue Stockport SK4 1QR
13
Page 14
To contact your local Service Force Centre telephone 08705 929 929
MIDLANDS
BIRMINGHAM
66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB
BOURNE
Pinfold Road Bourne PE10 9HT
BRIDGNORTH
68 St. Marys Street Bridgnorth Shropshire WV16 4DR
GLOUCESTER
101 Rycroft Street Gloucester GL1 4NB
HEREFORD
Units 3 & 4 Bank Buildings Cattle market Hareford HE4 9HX
HIGHAM FERRERS
30 High Street Higham Ferrers Northants NN10 8PL
ILKESTON
Unit 2 Furnace Road Ilkeston DE7 5EP
LEICESTER
Unit 7 Oaks Industrial Estate Coventry Road Narborough Leicestershire LE9 5GF
LINCOLN
Unit 8 Clifton Street Stone Field Park Lincoln LN5 8LQ
NEWCASTLE
18-21 Croft Road
UNDER LYME
Brampton Ind. Estate Newcastle under Lyme Staffordshire ST5 0TW
REDDITCH
13 Thornhill Road North Moons Moat Redditch Worcestershire B98 9ND
TAMWORTH
Unit 3 Sterling Park Claymore Tamworth B77 5DQ
WORCESTER
Units 1 & 2 Northbrooks Close Gregorys Mill Ind. Estate Worcester WR3 8BP
LONDON & EAST ANGLIA
BECKENHAM
11a Gardner Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ
CHELMSFORD
Hanbury Road Widford Ind. Estate Chelmsford Essex CM12 3AE
COLINDALE
Unit 14 Capitol Park Capitol Way Colindale London NW9 0EQ
ELTHAM
194 Court Road Mottingham Eltham London SE9 4EW
ENFIELD
284 Alma Road Enfield London EN3 7BB
GRAVESEND
Unit B4 Imperial Business Estate West Mill Gravesend Kent DA11 0DL
IPSWICH
Unit 6C Elton Park Business Centre Hadleigh Road Ipswich IP2 0DD
LETCHWORTH
16-17 Woodside Ind. Park Works Road Letchworth Herts SG6 1LA
LONDON
2-4RoyalLane Yiewsley West Drayton Middlesex UB7 8DL
MAIDENHEAD
Reform Road Maidenhead Berkshire SL6 8BY
MOLESEY
10 Island Farm Avenue West Molesey Surrey KT8 2UZ
NEWBURY
9PipersCourt Berkshire Drive Thatcham Berkshire RG19 4ER
NORWICH
2b Trafalgar Street Norwich NR1 3HN
SUNBURY
Unit 1a The Summit Hanworth Road Sunbury on Thames TW16 5DB
SOUTH EAST
ASHFORD
Unit 2 Bridge Road Business Centre Bridge Road Ashford Kent TN23 1BB
FLEET
Unit 1 Redfields Ind. Estate Church Crookham Fleet Hampshire GU13 0RD
HAYWARDS
21-25 Bridge Road
HEATH
Haywards Heath Sussex RH16 1UA
TONBRIDGE
Unit 30 Deacon Trading Estate Morley Road Tonbridge TN9 1RA
SOUTH WEST
BARNSTAPLE
Main R oad Fremington Barnstaple North Devon EX31 2NT
BOURNEMOUTH
63-65 Curzon Road Bournemouth Dorset BH1 4PW
BRIDGEWATER
6HerswellBusinessPark Salmon Parade Bridgwater Somerset TA6 5PY
BRISTOL
11 Eldon Way Eldonwall Trading Estate Bristol BS4 3QQ
EMSWORTH
266 Main Road Southbourne Emsworth PO10 8JL
ISLE OF WIGHT
Unit 8 Enterprise Court Ryde Business Park Ryde Isle of Wight PO33 1DB
NEWTON ABBOT
Unit 2 Zealley Ind. Estate Kingsteignton Newton Abbot TQ12 3TD
REDRUTH
Unit 7D Pool Ind. Estate Druids Road Redruth Cornwall TR15 3RH
14
Page 15
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Technical Specifications
DIMENSIONS Height 85 cm (33.5”)
Width 60 cm (23.6”) Depth 58 cm (22.7”)
POWER SUPPLY VOLTAGE 230-240 V/50 Hz TOTAL POWER ADSORBED 2650 W (13A)
MAXIMUM RECOMMENDED LOAD Cotton, linen 6 kg ( 13 lbs)
Synthetics 2.5 kg (5.5 lbs)
DRUM VOLUME 108 l
CONSUMPTIONS Cotton, linen 3.3 kWh (5 kg store dry)
Cotton, linen 2.7 kWh (5 kg iron dry)
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
15
Page 16
Unpacking
P1106
P1027
A
A
P1028
P0046
Warning !
Slide out the polythene bag containing the
polystyrene block(s) before using the appliance.
Positioning
Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the two adjustable feet at the front of the machine until it is.
The feet must never be removed.
Do not restrict the floor clearance through deep­pile carpets, strips of wood or similar. This might cause heat build-up which would interfere with the operation of the appliance.
Important
When operating the tumble dryer, the room temperature must not exceed 35°C, as it may affect the performance of the appliance.
It is recommended that, for your convenience, the machine is positioned close to your washing machine. Whilst drying, the tumble dryer will expel a certain amount of warm, very moist air, and this should be removed from the room as quickly as possible to prevent condensation. In an extremely well ventilated room or close to an open window, this may occur naturally. However, in general, it is better to carry the dryer's exhaust outside via the 100 mm diameter flexible hose supplied with the appliance; ending either temporarily at an open window, or permanently at a fixed ventilation grille, fitted to an exterior wall or window. The tumble dryer must be installed in a clean place, where dirt does not build up. Make sure there are no obstructing items or material near the air-intake louvres provided at the back (e.g. paper, rags etc.). To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.
Fitting the vent hose
To simplify the installation, there is a choice of vent outlets: one at the back, the others in the left and right-hand side. Connect the hose to whichever is the more convenient by pulling the ring nut (A) from the vent outlet at the back, screwing it on to the hose and pushing it firmly back into place. The unused vents should now be sealed with the special snap covers provided
16
Page 17
Advice: If the hose is long and the room temperature
P0055
P1056
B
P1107
low, the moisture might condense to water inside the hose. This is an unavoidable natural phenomenon. To prevent this water from lying in the hose or flowing back into the tumble dryer, it is advisable to drill a small hole (dia. 3 mm) in the lowest point of the hose and to place a small container below it.(See picture, point B).
Once connected to the dryer, run the vent hose to the desired outlet point, ensuring that the run’s overall length is less than 2 m, and that it contains no more than two bends. As to the outlet itself, if you have decided on a fixed wall/window grille, a good local builder’s merchant should be able to supply you with the necessary fittings and installation advice.
It is important not to connect the vent hose to, for example, a cooker hood, or a chimney or flue pipe designed to carry the exhaust from a fuel burning appliance.
In order to prevent the appliance from overheating, it is important that the steam exhaust is unobstructed. Therefore, in case of a permanent hose fitted to an exterior wall or ceiling, it must be ensured an exhaust capacity of at least 150 m
3
/h.
If the dryer is fitted next to kitchen units, make sure that the vent hose is not squashed. If the hose is partially squashed, drying efficiency will be reduced, resulting in longer drying times and higher energy consumption.
If the hose is completely squashed, the safety cut­outs with which the machine is fitted may operate.
Door reversal
To make it easier to load or unload the laundry the door can be reversed.
This operation must be carried out by qualified personnel.
Please contact the nearest Zanussi Service Centre.
Stacking kit
A special stacking kit is available through your dealer, to enable the mounting of the dryer on top of your washing machine.
Note that to avoid condensation problems, it is essential that the dryer be fitted with the flexible hose to carry its “exhaust” at least beyond the kitchen units; preferable outside the kitchen.
17
Page 18
Electrical connection
GREEN & YELLOW
BROWN
CORD CLAMP
BLUE
13A
P1041
E
N
L
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability
should this safety measure not be observed.
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. (See picture on page 5).
The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362) fuse must be used. Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow - Earth Blue - Neutral Brown - Live
Permanent connection
In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.
The switch must not break the yellow and green earth cable at any point.
The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the terminal «N» or coloured black.
The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
WARNING:
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
18
Page 19
From the Electrolux Group.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
The world’s No. 1 choice
.
© Electrolux Household Appliances Limited 2001
Loading...