Zanussi T833V, T 733 V User Manual
ZANUSSIZANUSSI
WASHING MACHINE
T 833 V
T 733 V
146 3866 00
INSTRUCTIONS MANUAL
CONTENTS
For the user
Safety instructions 23/24
Description of the appliance 25
Use of your appliance 26
Operating instructions 27/28
Programme chart 29/30
Hints & Tips 31-33
Cleaning and maintenance 34
If something doesn't work 35/36
Service 37
For the installer
Technical information 38
Installation
Unpacking 38
Installation 39
Levelling 39
Moving of the appliance 39
Water connection 40
Electrical connection 40
Guide to use the instruction
The following symbols will be found in the text to guid you
throughout the instructions :
Safety instructions
Hints and tips
Environmental information
22
SAFETY INSTRUCTIONS
You must read the whole of this instruction book
before using the appliance. Follow the advice
carefully. Keep the book for future reference. If
you sell or give away the appliance, make sure
that the book is passed to the new owner.
The following warnings are provided in the interest
of overall safety. You must read them before
installing or using the appliance.
Use
This appliance is designed to be used by
adults. Children should not be allowed to touch
the controls or play with the product.
It is dangerous to modify the specifications of
this appliance in any way.
Always unplug the appliance and turn off the
water after use.
Only wash fabrics which are designed to be
machine washed. If in doubt, follow the instructions you find on the label of the item itself.
Place small metal rings or edged plastic rings
in a net or bag.
Make sure that all pockets are empty. Hard,
sharp objects such as coins, safety pins, nails,
screws or stones may occur extensive damage.
Do not machine wash fabrics which are
saturated with petroleum products. If volatile
cleaning fluids have been used, make sure
that they are thoroughly removed from the
fabrics before loading them in the drum.
Small and delicate objects (e.g. baby socks,
stockings) can be easily washed inside a small
pillowcase with a zip fastener or in larger
socks.
Use only the recommended quantities of fabric
conditioner.
Before cleaning, care and maintenance, ensure
that the machine is unplugged.
Installation
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be cariied out by a qualified
plumber or competent person.
Make sure that the appliance does not stand
on its electrical supply cable.
This appliance is heavy. Care should be taken
when moving it.
All packaging and transit bolts must be removed
before using the appliance. Serious damage
may occur if this is not done.
If your washing machine is in a room subject to
temperatures below freezing, the water must
be removed from the machine. So, the danger
of freezing should be expected.
Read all instructions before using
the appliance and save them for
future reference.
23
Safeties
Lid : your washing machine is equipped with
a safety avoiding the switching of the appliance
when the flapdoors of the drum are opened ;
the closure of the lid is so impossible. An
electromechanic safety prohibits the opening
of the lid when the washing machine works and
2 minutes after the end of the programme.
Washing motor : in case of mechanic
overloading, overvoltage, a thermic safety
protects automatically the motor.
Heating : the heating can only begin when
the water quantity necessary for the washing
is in the tub. This safety is useful when there is
a water break-up or if you forget to open the
water inlet hose.
Anti-balanced system : This safety allows to
the appliance to keep a perfect stability during
the intermediary spinnings and during the final
spinning. If you notice that your laundry is not
spun enough, the anti-balanced system has
then detected a bad distribution of the laundry
during the final spinning ; so it is adviced to
achieve a new spinning taking care to unpack
handly the laundry before.
Environmental information
All materials marked by the symbol are
biodegradable. They can be disposed of without
danger or burnt in rubbish incinerators.
In order to save water and energy and to act in an
environmentally conscious manner, we advice
you to follow the below instructions :
Use if possible the appliance with full loads
instead of partial loads. Take care to not
overload the drum.
Use only the programmes with prewash for very
soiled laundry.
Savings on detergent and for the environment
may also be achieved if with medium to hard
water you add sufficient detergent for soft water
and then add separately a softener. This relieves
our waters of a certain amount of chemicals.
When disposing of the machine in a proper
manner, destroy the door lock and cut off the
power supply cord.
Anti-foam system: water consumption is
very low, due to the electronic spin cycle with
an intermediate spin after the main wash and
three rinse cycles for white and colour programs.
The spin cycle remains under the control of the
foam detection system after the wash cycle has
finished. If necessary, the spin cycle will stop
until all foam is removed.
The self positioning system: this electronic
system ensures the doors to be in the high
position when the wash programme is finished.
24
DESCRIPTION OF THE APPLIANCE
Programme selector
Spinning speed variator
Pushbuttons
Control lamp
Temperature selector
Control panel
Lid
Handle for
opening lid
Detergent dispenser
Symbols
Washing powder for programmes with
pre-wash.
Washing powder or liquid detergent for
the main wash.
Bleach compartment.
Liquid additives (fabric softener and
conditioner...).
5 Softener overflow.
Lever for castors
Trap door for
lint filter
5
25
USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
12734
5
1.ON/OFF pushbutton " "
Press the on/off pushbutton, the programme
starts : the control lamp illuminates.
2.Control lamp
The control lamp illuminates when the appliance is
working (on/off pushbutton " " pressed). It
extinguished when the on/off pushbutton " " is
pressed off.
3.Quick wash pushbutton " "
This pushbutton allows to realize a quick wash on
the cotton programme B and on the synthetics
programme J.
4.Half load pushbutton " "
This pushbutton allows to wash small quantity of
linen not much soiled (2,5 kg) only on the cotton
programmes.
6
and the following options:
the draining position " " in order to not spin
the laundry at the end of the cycle,
the rinse hold position " " so as to not drain
the water of the last rinse so that not creased
the laundry if this one is not immediately
unloaded of the drum.
6.Programme selector
It enables to select the most adapted programme
to the nature and degree of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each programme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a stop position "I" for all the
programmes or on a rinse hold position "I" if the
rinse hold position " " has been selected.
5.Spinning speed variator
It enables to choose the spinning speed :
from 300 to 850 rpm (model T833 V) or from 300
to 750 rpm (model T 733 V) for the cotton, synthetics
and wool programmes,
from 300 to 650 rpm for the delicate programmes.
26
Never turn the programme selector anticlockwise.
7.Temperature selector
It enables to choose the most adapted temperature
between cold ( ) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indications or the programme table, according to the
fibers and the fastness of the colours.
OPERATING INSTRUCTIONS
Before using your washing machine for the first time, we recommend that you do a preliminary wash with
the machine empty, as a precaution to clean the drum, tank and the product box.
1. Pour a dose of detergent in the “washing” detergent dispenser.
2. Select the programme B 90°C.
3. Press the on/off pushbutton
1. Place the laundry in the drum
Lift the lid.
Open the drum by pressing the release button A.
The two flapdoors will open automatically.
Shake the laundry out loosely and place into the
drum. Close the drum and shut the lid.
" ".
Be careful : before closing the lid of your machine,
ensure that the drum door is correctly closed :
the two flapdoors are fastened,
the button A is released (in the raised position).
An electronic system allows the drum to be in the
high position when the cycle is finished. This
system allows for easier loading and unloading of
the laundry. If an unbalanced weight alters the
functionning, turn the drum by hand.
2. Measure out the detergent
Measure out the amount of detergent
recommended by the manufacturer in the main
wash compartment ( ).
If you wish to carry out a prewash, pour the amount
required into the prewash compartment ( ).
3. Add the bleach agent, if required
Pour the bleach agent, if required, into the
compartment marked
the laundry withstands the treatment. Do not
exceed the MAX level.
. However, ensure that
Liquid detergent
only compartment
A
Powder detergent
Compartment
(prewash)
Compartment
(wash)
4. Add the fabric softener
Pour the softener, if required, into the compartment
marked
Your washing machine has been designed in
order to save water and detergent products.
Please take care the filling level of the detergent
products and do not exceed the MAX marks
located near the display window of your
detergent dispenser.
. Do not exceed the MAX level.
5. Press the quic k wash pushb utton
" " and/or the half load pushbutton
" " if required.
27
Loading...