Zanussi 641280, 641281, 641282, 641285, 641284 User Manual

...

RANGE COMPOSITION

A range of hoods supplementing the ‘inductive emission’ principle and automatic filter washing. Untreated air is introduced inside to partly compensate for that removed. This results in better drawing of fumes towards the filter surface and reduced air-treatment costs. The inside filters have water sprayer nozzles controlled by the special panel which controls washing functions. The range consists of hoods with 8 different lengths (1200, 1600, 2000, 2400, 2800, 3200, 3600 and 4000 mm) and 1500 mm deep.

SUPERTREDILWASH - SW line - 1500mm

FUNCTIONAL AND CONSTRUCTION FEATURES

� Constructed entirely in 304 AISI

stainless steel.

� Compensated flow exhaust

system (air inlet from outdoors).

� Automatic built-in filter-washing.

304 AISI WALL TYPE HOODS

� Supplied with "CHICANE" filter

packs in 304 AISI stainless steel with built-in lighting and drain pipe diam.= 1 1/2" in 304 AISI stainless steel.

� Brass nozzles with full

cone-shaped jets and fast joints in stainless steel complete with gasket and nylon connector.

� Water pipes in 304 AISI stainless

steel.

� All parts in contact with the inlet

air flow, at external temperature, are insulated to avoid condensation.

� Eyebolts and screw anchors for

ceiling installation.

� Heating and air conditioning costs

reduced up to 60%.

ZANUSSI

P R O F E S S I O N A L

TECHNICAL DATA

CHARACTERISTICS MODELS

STWP1512

641280

External dimensions - mm width 1200 1600 2000 2400 2800 3200 3600 4000 depth 1500 1500 1500 1500 1500 1500 1500 1500 height 500 500 500 500 500 500 500 500 Air Capacity - mc/h 2000 2700 3300 4000 4700 5300 6000 6600 Inlet Air Capacity - mc/h 1500 2010 2220 2400 2760 3180 3600 3960 Net weight - kg. 96 117 136 160 182 203 225 246

STWP1516

641281

STWP1520

641282

STWP1524

641283

STWP1528

641284

STWP1532

641285

STWP1536

641286

STWP1540

641287

100

1100/1300/1500

3/4

100

641280, 641287, 641286, 641285, 641284, 641283, 641282, 641281

1100/1300/1500

3/4

500

120

3/4

1200/1600/2000/2400

400/500/600/700

250

1 1/2

100

480

250

1900

500

3/4

1 1/2

2800/3200/3600/4000

1000/1100/1200/1300

400/500/600/700

250

120

1 1/2

100

1900

480

250

LEGEND

C - Water drain 1"1/2 1"1/2 1"1/2 1"1/2 1"1/2 1"1/2 1"1/2 1"1/2 I - Electrical connection 220 V, 1N,

OPTIONAL ACCESSORIES

ACCESSORIES MODELS

EXTRACTION PLENUM FOR HOOD 2400 MM

EXTRACTION PLENUM FOR HOOD 2800 MM

EXTRACTION PLENUM FOR HOOD 3200 MM

EXTRACTION PLENUM FOR HOOD 3600 MM

EXTRACTION PLENUM FOR HOOD 4000 MM

GALVAN. AIR INLET PLENUM FOR HOOD 2400MM

GALVAN. AIR INLET PLENUM FOR HOOD 2800MM

GALVAN. AIR INLET PLENUM FOR HOOD 3200MM

GALVAN. AIR INLET PLENUM FOR HOOD 3600MM

GALVAN. AIR INLET PLENUM FOR HOOD 4000MM

WASH-UP CONTROL PANEL-1 ZONE 60X20X40 CM

WASH-UP CONTROL PANEL-2 ZONES 60X20X40CM

WASH-UP CONTROL PANEL-3 ZONES 60X20X40CM

WASH-UP CONTROL PANEL-4 ZONES 60X20X40CM

HGAA2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.

STWP1512

641280

641141 641141 641141 641141 641141 641141 641141 641141

641142 641142 641142 641142 641142 641142 641142 641142

641143 641143 641143 641143 641143 641143 641143 641143

641144 641144 641144 641144 641144 641144 641144 641144

STWP1512

641280

50/60

STWP1516

641281

STWP1516

220 V, 1N,

STWP1520

641282

641281

50/60

STWP1524

641283

640138

640374

STWP1520

641282

220 V, 1N,

50/60

STWP1528

641284

640139

640375

STWP1524

641283

220 V, 1N,

50/60

STWP1532

641285

640140

640376

STWP1528

641284

220 V, 1N,

50/60

STWP1536

641286

640141

640377

STWP1532

220 V, 1N,

STWP1540

641287

640142

640378

641285

50/60

STWP1536

641286

220 V, 1N,

50/60

ZANUSSI

P R O F E S S I O N A L

www.zanussiprofessional.com

STWP1540

641287

220 V, 1N,

50/60