Zanussi iZZi W, iZZi ALU User Manual

DISHWASHER

IZZI

INSTRUCTION BOOK

152975 75/0

This appliance complies with the following E.E.C. Directives:

- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Important safety information 3 Description of the appliance 3 The control panel 4 Before use 5

Setting the water softener 5 Rinse aid 6 Use of detergent 6

Using your appliance 7 Loading your appliance 7 The lower basket 7 The cutlery basket 7 The upper basket 8 Adjusting the height of the upper basket 8

Hints and tips 8 Washing programmes 9 Operating sequence 10 Maintenance and cleaning 11 Something not working 12 Service and Spare Parts 13

Customer Care Department 13 Guarantee Conditions 13 Installation instructions 14

Water supply connections 14 Water outlet hose connection 14 Electrical connection 14 Fitting under a counter 15

Levelling 15 Hints for test centres 15

Contents

Dimensions Width 60 cm

Height with working top 85 cm Height without working top 82 cm Max depth 63.7 cm Max depth with open door 115.2 cm

Electrical connection Voltage 220/240 V - 50 Hz Motor rating during wash 200 W Power of heating element 2100 W Overall power 2300 W

Water supply pressure Minimum 50 kPa (0.5 bar)

Maximum 800 kPa (8 bar)

Capacity 12 place settings

Technical specifications

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

Installation

● This appliance is heavy. Care should be taken when

moving it.

● It is dangerous to alter the specifications or attempt to

modify this product in any way.

● Care must be taken to ensure that the appliance does not

stand on the electrical supply cable.

● Any electrical work required to install this appliance should

be carried out by a qualified electrician or competent person.

● Any plumbing work required to install this appliance should

be carried out by a qualified plumber or competent person.

Child Safety

● This appliance is designed to be operated by adults.

Children should not be allowed to tamper with the controls or play with the product.

● Keep all packaging well away from children.

● Keep all detergents in a safe place out of children's reach.

During Use

● Items that are contaminated by petrol, paint, steel or iron

debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

● Under no circumstances should you open the door whilst

the appliance is in operation. Always turn off the appliance before opening the door.

● Only use detergent specifically designed for use in

dishwashers.

● Long bladed knives stored in an upright position are a

potential hazard.

● Long and/or sharp items of cutlery such as carving knives

must be positioned horizontally in the upper basket.

● When finishing loading or unloading close the door, as an

open door can be a hazard.

● Do not sit or stand on the open door.

● Isolate the appliance from the power supply and turn off the

water supply after use.

● Care should be taken when cleaning the bottom door seal

and hinge area as any exposed metal edges may cut if care is not taken.

● This product should be serviced by an authorised Service

engineer, and only genuine spare parts should be used.

● Under no circumstances should you attempt to repair the

machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Conservation

In the interest of the environment:

● Materials marked with the symbol are recyclable.

● Check with your local Council or Environmental Health

Office to see if there are facilities in your area for re-cycling this appliance.

● When the appliance is to be scrapped, cut off the power

supply cable and make the door closing device unusable to prevent young children from being trapped inside.

● Help to keep your country tidy - use authorised disposal

sites for your old appliance.

Important safety information

1. Levelling spacers

2. Upper basket stop

3. Salt container

4. Large filter

5. Detergent dispenser

6. Control panel

7. Rating plate

8. Rinse aid dispenser

9. Central filter

10. Lower spray arm

11. Upper spray arm

12. "SID" detergent dispenser (Super Intensity Dispenser)

13. Upper basket

14. Worktop

Description of the appliance

1 2

3 4

IN78

13 12

1. On/Off push button

(with integrated indicator light)

2. Door handle

3. Programme selection push buttons

(with integrated indicator light)

“DAILY 30

“ programmme push button

“65° NORMAL” and “50° ECO” programme push button

This push button allows the selection of 2 programmes and has 2 integrated indicator lights.

● The upper light corresponds to the “65° NORMAL”

programme: this programme is memorized and, without depressing this push button, the start of the programme will occur after 6 seconds from the pressure of the On/Off push button. In this time it is possible to change programme simply pressing the push button of another programme.

● The lower light corresponds to the “50° ECO”

programme. To activate this programme it is necessary to depress the pushbutton.

“70° INTENSIVE SID 80’ “ programme push button

The control panel

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply

with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill

with salt

5. Fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener designed to

remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke

degrees, French degrees and PPM (parts per Million). The softener should be adjusted according to the hardness of

the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 3. If this level is not suitable for your area the softener should be

adjusted.

To select a different level be sure that the dishwasher is off and then proceed as follows:

1. Press 1 and 3 programme push buttons simultaneously.

2. While keeping the programme push buttons 1 and 3

pressed switch on the dishwasher by pressing the On/Off push button .The On/Off indicator light comes on.

At the same time the programme push buttons 1 and 3 start flashing.

3. Press the push button 1, the indicator light of the push

button 3 turns off, while the indicator light of the push button 1 remains fixed for about 5 seconds and then starts flashing indicating the current level of the water softener.

The current level is indicated by the number of flashes made by the push button 1 indicator light, that alternates 5 seconds off with a number of flashes, this for about 60 seconds.

Example:

1 flash = level 1 2 flashes = level 2 3 flashes = level 3 4 flashes = level 4 5 flashes = level 5

4. To change the level, press the programme push button 1. Each time the push button is pressed the level changes.

Example:

If the current level is 3, by pressing the programme push button 1 once, level 4 is selected.

If the current level is 5, by pressing the programme push button 1 once, level 1 is selected.

The push button 1 indicator light remains off for about 5 seconds after which it starts flashing indicating the new level selected.

5. To memorise the new level, switch off the dishwasher by pressing the On/Off push button.

Filling with salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt container.

2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the container is full. Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centre. A green float is clearly visible when there is salt inside the container, and almost disappears when the salt has finished reminding you to add salt.

Before use

Level

Use of

salt

French

degrees

(°TH)

PPM

(Parts per

Million)

Clarke

degrees

1 2 3 4 5

NO YES YES YES YES

< 6

6 - 21 22 - 35 36 - 49 50 - 63

< 8

8 - 30 31 - 50 51 - 70 71 - 90

< 80

81 - 300 301 - 500 501 - 700 701 - 900

Water hardness

SO462

SR14

R11

SALE

SALT

SALZ

SEL

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A) anticlockwise.

2. Add the rinse aid until the container is completely full.

The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B) becomes clear.

Ensure that the lid is closed after every refill. Do not put liquid detergent in the rinse aid compartment.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes.

Use of detergent

Only use detergents specifically designed for use in dishwashers.

We recommend the use of Finish detergents which are available in the following options:

Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser.

Finish Powder recommended for every day use. Finish Liquid Gel ideal for every day use. As the gel is extra

gentle it is recommended for fine bone china.

If using powder detergents proceed as follows:

1. Open the dispenser lid by pulling the catch (D).

2. Add the detergent according to the instructions given in the

Washing programmes chart. As all detergents are not the same, you should also consult the instructions on the packet.

3. Always close the lid.

4. If the programme has a prewash add a little amount of

detergent in the SID detergent dispenser, located in the centre of the upper basket. Follow the recommended quantity of detergent given in the Washing programmes chart.

If using detergent in tablets proceed as follows:

1. For all programmes; place 1 tablet inside the detergent

dispenser.

2. Always close the lid.

3. For all programmes with prewash; place a portion of a

further tablet on the lid of the detergent dispenser.

Insufficient quantities of detergent will produce poor washing results, whereas an excessive amount of detergent will not improve washing results and is also wasteful. Using no more than the correct amount also contributes to reducing pollution.

Compact detergents with enzymes

In these compact powders the environmentally unfriendly components have been replaced by natural enzymes and other more biodegradable substances.

The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.

By choosing the BIO programmes you can therefore achieve the same cleaning results that would otherwise be achievable only with 65°C programmes and conventional detergents.

BR01

BR03

BR02

DE17

DE14

+ 11 hidden pages