Zanussi FWD831 User Manual
RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer.
The models detailed on this sheet are 2
free-standing rectangular boiling pans with
indirect heating (jacketed): 2 gas and 1
electric.
Model 200283
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Burners in stainless steel with optimized
combustion, flame failure device and
protected pilot light (gas models).
� Incoloy armoured elements endowed with
safety thermostat positioned in the jacket
cavity base (electric models).
� Safety thermostat.
� Great reduction of energy consumption
thanks to a pressure switch controls
monitoring energy and water consumption
simplifiing use and eliminating the need for
continuous water refilling.
� Front and side panels in stainless steel
with Scotch Brite finish.
� All models have right-angled side edges to
allow flush-fitting joins between units,
eliminating gaps and possible dirt traps.
� Main connections can be via the base of
the unit.
� All models provided with service duct to
facilitate installation.
� Feet in stainless steel 50 mm adjustables
in height.
� All gas appliances are supplied for use
with natural gas, with LPG conversion jets
supplied as standard.
� Hot and cold water refilling through an
electrovalve.Water drain through a 2"
stainless steel tap with athermic handle.
N 900
NPGI1225
200283
ZANUSSI
P R O F E S S I O N A L
NPEI1225
200284
RECTANGULAR BOILING PANS
� The special design of the control knob
system guarantees against water infiltration.
� All models incorporate fixing points for the
bridging system
� IPX5 water protection.
TECHNICAL DATA
CHARACTERISTICS MODELS
Power supply Gas Gas Electric
External dimensions - mm
width 900 1200 1200
depth 900 900 900
height 850 850 850
height adjustment 50 50 50
Net vessel useful capacity - Lt. 180 240 240
Vessel dimensions - mm
height 485 485 485
width 740 1040 1040
depth 550 550 550
Heating type Indirect Indirect Indirect
Power - kW
gas 29 35
installed-electric 0.05 0.05 24
Net weight - kg. 180 222 200
Supply voltage 230 V, 1N, 50/60 400 V, 3N, 50/60 400 V, 3N, 50/60
INCLUDED ACCESSORIES
WATER ADDITIVE AGAINST CORROSION 1 1 1
* In accordance with H regulations for gas models
belonging to class B11 (power over 14kW), it is
necessary to install a chimney (if installed under a
hood) or chimney and draft diverter if the waste gases
are vented directly outside.
NPGI918
200282
200282
200283
A
B
180
56 56
688
670
770
B
A
85
150
900
A I
B
180
56 56
688
670
770
B
A
158
299
70
330
I
H
200
126
674
680
770
900
I
H
80
140
190
597815800
900
A
B
180
56 56
670
770
B
A
85
150
158
299
70
330
I
H
200
688
I
H
80
140
1200
126
674
680
770
900
900
190
597815900
200284
158
299
70
330
200
126
674
680
900
I
900
190
85
150
80
1200
597816000
LEGEND
NPGI918
200282
NPGI1225
200283
NPEI1225
200284
A - Hot water inlet 1/2" 1/2" 1/2"
B - Cold water inlet 1/2" 1/2" 1/2"
C - Water drain 1/2" 1/2" 1/2"
G - Condensation outlet 2" 2" 2"
H - Gas connection 3/4" 3/4"
I - Electrical connection 230 V, 1N, 50/60 400 V, 3N, 50/60 400 V, 3N, 50/60
OPTIONAL ACCESSORIES
ACCESSORIES MODELS
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278 206278
2 SIDE COVERING PANELS H=700 D=900 206134 206134 206134
2 SIDE KICKING STRIPS 206180 206180 206180
4 FEET FOR CONCRETE INSTALLATION 206210 206210 206210
4 WHEELS (2 WITH BRAKE) 206188 206188 206188
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150 206150
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148 206148
FRONTAL KICKING STRIP 1000 MM 206177 206177 206177
FRONTAL KICKING STRIP 1200 MM 206178 206178 206178
FRONTAL KICKING STRIP 1600 MM 206179 206179 206179
FRONTAL KICKING STRIP 200 MM 206174 206174 206174
FRONTAL KICKING STRIP 400 MM 206175 206175 206175
FRONTAL KICKING STRIP 800 MM 206176 206176 206176
JUNCTION SEALING KIT 206086 206086 206086
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234 206234
PRESSURE REGULATOR FOR GAS UNITS 927225 927225
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165 206165
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138 206138
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137 206137
WATER ADDITIVE AGAINST CORROSION 927222 927222 927222
NPGI918
200282
NPGI1225
200283
NPEI1225
200284
ZANUSSI
P R O F E S S I O N A L
www.zanussiprofessional.com
BACR1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
Loading...