Zanussi FA832 User Manual

E
GB
P
LAVADORA
WASHING MACHINE
MÁQUINA DE LAVAR ROUPA
FA 832
MANUAL DE USO
USER MANUAL
MANUAL DE UTILIZAÇÃO
35.292.701/1
60°-90°
B
SINTETICOS
J
30°-60°
40°-60°
COLORES RESISTENTES
DELICADOS
B
30°-40°
COLORES DELICADOS
BLANCOS CON PRELAV. ACLARADOS SUAVIZANTES CENTRIFUGADO
K
30°-40°
LANA
C
30°-40°
L
60°-90°
SINTETICOS CON PRELAV.
A
30°-60°
H
ACLARADOS
D
M
SUAVIZANTES DESCARGA
G
N
P
F
P
A
N
B
M
C
L
K
D
9 0
°
0°
8
3
0
°
°
7
0
40
F
°
°
6
0
0
5
°
G
J
H
22
Dear customer,
Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use recycled paper.
ENGLISH
23
Maintenance 38
Bodywork 38 Detergent dispenser drawer 38 Cleaning of the drainage area 38 Water inlet filter 39 Frost precautions 39 Emergency emptying out 39
Something not working? 40-41
Warnings 24-25
Disposal 25
Tips for environmental protection 25
Technical specifications 26
Installation 27-28
Unpacking 27 Hydraulic connection 27 Levelling 28 Electrical connection 28
Your new washing machine 29
Description of the appliance 29
Detergent dispenser drawer 29
Use 30
Control panel 30 Controls 30 Washing hints 31
Sorting the laundry 31 Temperatures 31 Before loading the laundry 31 Maximum loads 31 Laundry weights 31 Removing stains 31
Detergents and additives 32 International wash code symbols 33 Operating sequence 34-35 Washing programmes 36-37
Contents
24
Installation
• All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book.
• Any electrical work required to install this appliance must be carried out by a qualified electrician.
• Any plumbing work required to install this appliance must be carried out by a qualified plumber.
• After having installed the machine, check that it is not standing on its electrical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the feet and the floor.
Use
• This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
• Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
• Do not overload the appliance. Follow the instructions in the instruction book.
• Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage.
• Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance.
• Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub.
• Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry.
Warnings
• Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells.
• Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book.
• Always unplug the appliance and shut the water tap after use.
General safety
• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local Service Centre.
• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
• During high temperature wash programmes the door glass may get hot. Do not touch it!
The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.
ENGLISH
25
Disposal
Tips for environmental protection
Packaging materials
The materials marked with the symbol are recyclable.
>PE<=polyethylene >PS<=polystyrene >PP<=polypropylene
This means that they can be recycled by disposing of them properly in appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance. Help to keep your country tidy!
To save water, energy and to help protect the environment, we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
• The machine works more economically if it is fully loaded.
• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
Child safety
• Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum.
• When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.
26
DIMENSIONS Height 85 cm
Width 60 cm Depth 60 cm
MAXIMUM LOAD Cotton 4,5 kg
Synthetics 2 kg Delicates 2 kg Woollens 1 kg
SPIN SPEED 800 rpm max.
POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED 2000 W MINIMUM FUSE PROTECTION 10 A
WATER PRESSURE Minimum 5 N/cm
2
Maximum 80 N/cm
2
This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
Technical specifications
ENGLISH
27
Installation
Transit security bars
Before starting the machine up, the transport security bars must be removed as follows:
You are advised to keep all the transport security bars in case the appliance has to be transported again.
1. Unscrew and remove the three rear screws by means of a key.
2. Lean the appliance back on the rear and fit one of the polystyrene angles between the appliance and the floor.
Make sure the hoses are not squashed.
3. Carefully remove the plastic bags on the right and the left, pulling them to the centre of the appliance
4. Place the machine in an upright position and remove the three plastic bolts.
5. Plug the 3 holes with the plastic plugs which you can find in the envelope containing the instruction booklet.
Hydraulic connection
There should be a COLD WATER tap near the washing machine with a screwing on connection pipe of 3/4 gas for the water supply, a sink, a wash basin or a drainage system in the wall.
Previously check if: — it is not a hot water tap. — the running water is clean. If not, run off a
reasonable amount of water to flush out any debris that may have collected in the pipes.
Have the permanent drainage system in the wall checked by a plumber.
A) Place the enclosed rubber joint, delivered in a plastic bag together with the appliance (A) Fig.6), at the very end of the inlet hose and carefully screw the pipe to the tap taking care not to damage the screwdrive and fix the nut well on to the end in order to avoid leaking.
B) If necessary turn the hose adequately by unscrewing the nut at the rear of the appliance.
C) Now tighten the nut anew to avoid leaks. (Open the tap and asure that it does not leak and close it again.)
D) Place the discharging hose in a washbasin or sink with the aid of the bent piece delivered separately. The bent piece has to be entered into the tube’s mouth in order to assure the support. Aforesaid piece allows the hose to be fixed to the wall by means of an opening on the upper part and that way the hose does not move and its falling is avoided.
P0287
P0018
AL009
2
1
P0001
P0002
A
AL013
P0021
P0022
Loading...
+ 14 hidden pages