Zanussi ER7827B, ER7826B User Manual

I N F O

INSTALLATION AND	INSTRUCTION MANUAL
FRIDGE-FREEZERS	ER 7826 B
	ER 7827 B

2222 023-11

IMPORTANT SAFETY INFORMATION

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of safety. You MUST read it carefully before installing or using the appliance.

Installation

¥This appliance is heavy. Care should be taken when moving it.

¥It is dangerous to alter the specifications or attempt to modify this product in any way.

¥Care must be taken to ensure that the appliance does not stand on the electrical supply cable. If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.

¥Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

¥Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall but leaving the required distance for ventilation as stated in the installation instructions.

¥The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.

Child Safety

¥Do not allow children to tamper with the controls or play with the product.

¥Keep all packaging well away from children.

During Use

¥This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only.

¥Frozen food must NOT be re-frozen once it has thawed out.

¥Do not place carbonated or fizzy drinks in the freezer.

¥Do not remove items from the freezer if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

¥Ice lollies can cause Ôfrost/freezer burnsÕ if consumed straight from the freezer.

¥ManufacturersÕ storage recommendations should be strictly adhered to. Refer to relevant instructions.

¥The cooling plate or refrigerated freezer shelves in this appliance contain channels through which the refrigerant passes. If these are punctured this will cause substantial damage to the appliance and result in food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Under NO circumstances should solid ice be forced off the lining or shelves. Solid ice should be allowed to thaw, when defrosting the appliance. See Defrost Instructions.

Maintenance and Cleaning

¥Switch off and unplug the appliance before carrying out any cleaning or maintenance work.

Servicing

¥This product should be serviced by an authorised engineer and only genuine spare parts should be used.

¥Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Electrolux Service Force Centre and always insist on genuine spare parts.

At the end of the Appliance Life

¥When disposing of your appliance, use an authorised disposal site.

¥Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.

Door reversal directions

1.Disconnect from the electricity supply.

2.Remove all loose items, including food, store food in a cool place.

3.Gently lay the fridge/freezer on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing;

4.Remove the feet (3)

5.Remove bottom hinge (1).

6.Remove the freezer door by releasing it from the middle hinge (H).

7.Unscrew the middle hinge.

8.Slide out the fridge door from pin (G), unscrew the latter and then screw it down into the hingeblade provided on the opposite side, after having removed the small plugs (I) which should then be fitted on the opposite side.

9.Refit the fridge door and replace the middle hinge to the left hand side.

10.Replace the door and bottom hinge (1) on the opposite side.

11.Refit the feet (3) on the opposite side.

Attention

After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

D715

CONTENTS

Instructions for the user

Important Safety Information	2
Operation	4
Before use	4
Setting the temperature	4
The freezer compartment	4
Freezing fresh food	4
Frozen food storage	5
Thawing	5
Making ice cubes	5
Fresh food refrigeration	5
Normal operating sounds	5
Movable shelves	6
Health and Safety Guidelines	7
Maintenance and Cleaning	8
Internal cleaning	8
External cleaning	8
When the appliance is not in use	8
Changing the light bulb	8
Defrosting	8
Something not working	10
Service and Spare Parts	11
Customer Care	11
Guarantee Conditions	14

Instructions for the installer

Technical specification	15
Installation	16
Positioning	16
Rear Spacers	16
Electrical Connection	17
Door Reversal	18

2222 023-11	3

+ 7 hidden pages