Zanussi DTI6726 USER MANUAL

LAVAVAJILLAS

DISHWASHER

MAQUINA DE

LAVAR LOIÇA

DTI 6726

MANUAL DE INSTRUCCIONES

INSTRUCTION BOOKLET

INSTRUÇÕES DE UTILIZAÇÃO

152991 25/1

The appliance which you have just bought is supplied not only with this instruction manual, but also with a Warranty Card Certificate, on the back of which are written the relative conditions.

Please fill in the necessary details on the Card Certificate and send it to the Zanussi Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Zanussi network centres).

We congratulate you on your choice. Carefully read this instruction manual and follow attentively the recommendations it provides, and thus benefit from years of excellent service.

The appliance which you have just purchased has been very accurately controlled throughout the entire manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the

warranty period, or when such period has expired, please directly contact your nearest Zanussi Service Centre.

The address and telephone number of said Centre can be easily found in the enclosed List or by looking in the telephone directory, under Zanussi.

Our Zanussi Service Network is at your complete disposal, to serve you with maximum speed and efficiency, all you have to do is call.

Attention

PGU01GB

The products

In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers. To ensure that your dishwasher functions perfectly, Zanussi recommends using Calgonit System, a unique and complete product, tested by millions of householders. Calgonit System includes Calgonit detergent, rinse aid, salt, machine detergent and Citro-Fresh. It is able to fulfil the main requirements for clearing both the crockery and the machine itself.

For the user

Important safety information 27 Description of the appliance 28 The control panel 29 Before use 30

Setting the water softener 30 Rinse aid 32 Use of detergent 33

Using your appliance 34 Loading your appliance 34 Adjusting the height of the upper basket 35

Hints and tips 36 Washing programmes 37 Operating sequence 38 Maintenance and cleaning 39

Internal cleaning 39 Cleaning the central filter 39 Cleaning the large filter 39 External cleaning 40 Prolonged periods of non-operation 40 Frost precautions 40 Moving the machine 40

Something not working 41 Service and spare parts 42

For the installer

Installation instruction 43

Technical specifications 43 Building-in features 43 Fitting under a counter 44 Water supply connections 44 Water outlet connection 45 Electrical connection 45

Building-in 46 The furniture door 46 Mounting the furniture door onto the panel 46 Fixing to the adjacent units 47 Kitchen plinth adjustment 47

Contents

PCO04/1GB

Guide to use the instrucion book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions

1. 2. 3. Step by step instructions Hints and tips

Description of the appliance

PDA18GB

2 3

4 5

IN85

1. Water hardness adjustment

2. Levelling spacers

3. Upper basket stop

4. Salt container

5. Lower spray arm

6. Detergent dispenser

7. Control panel

8. Rating plate

9. Rinse aid dispenser

10.Large filter

11. Central filter

12. Upper spray arm

13. Upper basket

In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be partially opened.

1. On/Off pushbutton

Depress this button to switch the dishwasher on. Depress again this button to switch the appliance off.

2. Economy 55°C button

By depressing this button you will reduce the temperature of the main wash from 65°C to 55°C, with considerable energy saving (see “Washing programmes” chart).

3. Programme guide

This is a summary of the “Washing programmes” chart which will help you select the correct programme.

4. Programme marker

Depress the button corresponding to the desired washing programme (see “Washing programme” chart).

5. Programme selector dial

To select a programme, turn the programme selector dial clockwise, making sure that the programme letter you wish to select corresponds with the programme marker on the control panel. At the end of the programme the machine will stop automatically.

The control panel

PCP06/1GB

1 2 3 4 5

Before using your dishwasher for the first time:

1. ensure that the electrical and water connections comply with the installation instructions

2. remove all packaging from inside the appliance

3. set the water softener

4. pour 1 litre of water inside the salt container and

then fill with salt

5. fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, for example German, French degrees, and parts per million.

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 2. If this level is not suitable for your area the softener

should be adjusted.

To adjust the water softener:

With a screwdriver turn the selector on the upper front corner of the machine until the level required corresponds with the marker.

Before use

PBU01/2GB

AA05

Level

Use of

salt

French

degrees

(°TH)

PPM

(Parts per

million)

German degrees

(°dH)

1 2 3 4 5

0-4

5-11 12-22 23-34 35-50 51-67

SI SI SI SI SI

0-7

8-20 21-40 41-60 61-90

91-120

0-80

81-200 201-400 401-600 601-900

901-1200

Water hardness

If your water hardness is below level 1 it is already soft and therefore there is no need to use salt. In this case adjust the water softener on level 1 without using salt.

Filling with salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt

container.

2. Pour 1 litre of water inside the container, (this is necessary only before filling with salt for the first time).

3. Then using the funnel provided, pour in the salt

until the container is full. Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centre.

A green floater is clearly visible when there is salt inside the container, and almost disappears when the salt has finished, reminding you to add salt.

PFS01/1GB

SALE

SALT

SALZ

SEL

SR06

SR11

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A)

anticlockwise.

2. Add the rinse aid until the container is

completely full. The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B)

becomes clear.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid department. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).

Start from position 3. Gradually increase the dose if there are drops of

water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.

PFR01/1GB

BR01

BR02

BR03

+ 16 hidden pages