Zanussi DTI4725 USER MANUAL
MANUAL DE INSTRUCCIONES INSTRUCTION BOOKLET
LAVAVAJILLAS
DISHWASHER
DTI 4725
Attention
The appliance which you have just bought is supplied not only with this instruction manual, but also with
a Warranty Card Certificate, on the back of which are written the relative conditions.
Please fill in the necessary details on the Card Certificate and send it to the Zanussi Centre relative to
the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of
Zanussi network centres).
We congratulate you on your choice. Carefully read this instruction manual and follow attentively the
recommendations it provides, and thus benefit from years of excellent service.
The appliance which you have just purchased has been very accurately controlled throughout the entire
manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the
warranty period, or when such period has expired, please directly contact your nearest Zanussi
Service Centre.
The address and telephone number of said Centre can be easily found in the enclosed List or by
looking in the telephone directory, under Zanussi.
Our Zanussi Service Network is at your complete disposal, to serve you with maximum speed and
efficiency, all you have to do is call.
The products
In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers.
To ensure that your dishwasher functions perfectly, Zanussi recommends using Calgonit System, a
unique and complete product, tested by millions of householders.
Calgonit System includes Calgonit detergent, rinse aid, salt, machine detergent and Citro-Fresh.
It is able to fulfil the main requirements for clearing both the crockery and the machine itself.
27
PGU01GB
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is left with the appliance in order
that the new owner can get to know the functioning of the appliance and the relevant safety
information.
This information has been provided in the interest of safety. You MUST read it carefully before
installing or using the appliance.
Installation
■ This appliance is heavy. Care should be taken
when moving it.
■ It is dangerous to alter the specifications or
attempt to modify this product in any way.
■ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
■ Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
■ Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Child Safety
■ This appliance is designed to be operated by
adults.
Children should not be allowed to tamper with
the controls or play with the product.
■ Keep all packaging well away for children.
■ Keep all detergents in a safe place out of
children's reach.
During Use
■ Items that are contaminated by petrol, paint,
steel or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this
dishwasher.
■ Under no circumstances should you open the
door whilst the appliance is in operation. Always
turn off the appliance before opening the door.
■ Only use detergent specifically designed for use
in dishwashers.
■ When finishing loading or unloading close the
door, as an open door can be a hazard.
■ Do not sit or stand on the open door.
■ Isolate the appliance from the power supply and
turn off the water supply after use.
■ Care should be taken when cleaning the
bottom door seal and hinge area as any
exposed metal edges may cut if care is not
taken.
■ This product should be serviced by an
authorised Service engineer, and only
genuine spare parts should be used.
■ Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Force Centre.
Always insist on genuine spare parts.
Conservation
In the interest of the environment:
■ Materials marked with the symbol are
recyclable.
■ Check with your local Council or
Environmental Health Office to see if there
are facilities in your area for re-cycling this
appliance.
■ When the appliance is to be scrapped, cut
off the power supply cable and make the
door closing device unusable to prevent
young children from being trapped inside.
■ Help to keep your country tidy - use
authorised disposal sites for your old
appliance.
28
PSI01GB
Contents
For the user
Important safety information 28
Guide to use the instruction book 29
Description of the appliance 30
The control panel 31
Before use 32
Setting the water softener 32
Rinse aid 34
Use of detergent 35
Using your appliance 36
Loading your appliance 36
Adjusting the height of the upper basket 37
Hints and tips 38
Washing programmes 39
Operating sequence 40
Maintenance and cleaning 41
Internal cleaning 41
Cleaning the central filters 41
Cleaning the large filter 41
External cleaning 42
Prolonged periods of non-operation 42
Frost precautions 42
Moving the machine 42
For the installer
Installation instruction 45
Technical specifications 45
Building-in features 46
Fitting under a counter 46
Water supply connections 47
Water outlet connection 48
Electrical connection 48
Building-in 49
The furniture door 49
Mounting the furniture door
onto the panel 49
Adjusting the door balance 50
Levelling 50
Securing under a counter 50
Kitchen plinth adjustment 51
Something not working 43
Service and spare parts 44
Guide to use the instrucion book
The following symbols will be found in the text to guide you throughout the instructions:
☞
Safety instructions
Step by step instructions
Hints and tips
Environmental information
29
PCO02GB
Description of the appliance
Levelling
spacers
Upper basket
stop
Large
filter
Upper
basket
Upper spray
arm
Lower
spray arm
Salt container
Lower
basket
IN24
Central filters
Rinse aid
dispenser
Cutlery basket
Detergent
dispenser
Rating plate
Control
panel
30
PDA02GB
The control panel
1
In this fully integrated appliance the controls are
located on the top of the door. When selecting a
programme, the door needs to be partially opened.
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short «instruction accepted» signal
When any of the buttons are pressed: a short
audible signal informs you that the machine has
accepted the instruction given.
Long «programme run» signal
A continuous audible signal lasting about one
second, heard only when you close the dishwasher
door, informs you that the washing programme is
starting.
34 5
2
1. On/Off pushbutton
Depress this button to switch the dishwasher
on. The On/Off indicator light illuminates
indicating that the washing programme can be
selected and started. Depress again this button
to switch the appliance off.
2. Salt refill indicator light
This light illuminates when the salt container
needs refilling. This light will remain on in a soft
water area where salt is not required.
3. On/Off indicator light
This illuminates when the On/Off button is
depressed, indicating that the machine is on.
4. Programme selector buttons
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five
seconds, informs you that the wash programme
has ended. If you wish to deactivate these audible
signals, press both the « 65°» and « 55°»
programme buttons together for about 3 seconds,
until the intermittent audible signal can no longer
be heard.
70°
SO66
To reactivate the audible signals, press both
buttons together again for about 3 seconds, until
an intermittent audible signal is heard.
65°
55°
55°
Depress the button corresponding to the
desired washing programme (see “Washing
programme” chart).
5. End of cycle indicator light
This light flashes when the programme has
finished. To switch it off depress the On/Off
button.
31
PCP02GB
Before use
Before using your dishwasher for the first time:
ensure that the electrical and water
☞
connections comply with the installation
instructions
remove all packaging from inside the appliance
☞
set the water softener
☞
fill the salt container
☞
fill the rinse aid dispenser.
☞
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the
water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
The higher the content of these salts, the harder
your water is.
Water hardness is measured in equivalent scales,
for example German and French degrees.
The softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness of
the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
Water hardness
German
degrees
(°dH)
0-7
8-21
22-28
29-39
40-50
If you use phosphate free detergents containing
enzymes, use salt starting from 4°dH (7°TH).
French
degrees
(°TH)
0-14
15-39
40-50
51-70
71-90
Level
1
2
3
4
5
Use of
salt
NO
YES
YES
YES
YES
You may change the factory level setting by means
of the wash programme selector buttons. Each
button corresponds to a different level:
Level 1 = “Rinse and Hold” button
Level 2 = “Intensive” button 70°
Level 3 = “Normal” button 65°
Level 4 = “Economy” button 55°
Level 5 = “Quick” button 55°
To select a different level proceed as
☞
follows:
- Press the Normal 65° and Quick 55°
programme buttons simultaneously for about 5
seconds until the short “instruction accepted”
signal is heard. The pilot light corresponding to
the current level flashes very rapidly.
- Press the programme button corresponding to
the required level.
- 5 seconds after having last pressed any of the
programme buttons, the dishwasher
memorises the level selected and returns to
the programme setting mode.
SO67
70°
65°
55°
55°
32
PBU02GB
Filling with salt
If your water is "level 1" it is already soft and
therefore there is no need to use salt.
Salt must be used from “level 2” upward.
Only use salt specifically designed for use in
dishwashers.
Other types of salt may reduce the efficiency of the
softener.
Only fill with salt just before starting one of the
complete washing programmes (not the Rinse and
Hold programme).This will prevent any grains of
salt or salty water, which may have been spilled,
remaining on the bottom of the machine for any
period of time, which may cause corrosion.
To fill:
☞
➀ To fill with salt, unscrew the cap of the salt
container.
➁ Pour about 1 litre of water inside the container,
or until it is full (this is necessary only before
filling with salt for the first time).
➂ Then using the funnel provided, pour in the salt
until the container is full (approx. 1 kg).
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
➃ Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
➄ Screw on the cap tightly.
The salt container will require topping up
periodically.
SR02
SALE
SALT
SALZ
SEL
You are reminded of this by the “Salt refill indicator
light” on the control panel which comes on when
the salt has finished.
The “Salt refill indicator light” on the control
panel can remain illuminated for 2-6 hours
after the salt has been replenished, assuring
the dishwasher remains switched on. If you
are using salts that take longer to dissolve
then this can take longer. The function of the
machine is not affected.
33
PFS02GB
Rinse aid
Rinse aid is automatically added during the last
rinse, ensuring through rinsing, spot and streak
free drying. The dispenser, which is positioned
inside the door, holds about 110 ml of rinse aid,
which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Filling with Rinse Aid:
➀ Open the container by turning the lid (A)
anticlockwise.
A
➁ Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator
(B) will be completely dark.
➂ Top up the rinse aid when the indicator (B)
becomes clear.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
department. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess
foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6
position selector (C) (position 1 minimum dosage,
position 6 maximum dosage). (Start from position
3). Gradually increase the dose if there are drops
of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR01
BR03
B
5
4
6
x
3
a
2
m
1
C
5
4
6
x
3
a
2
m
1
34
BR02
PFR01GB
Loading...